Nilight Motorcycle Charger with 12V Voltmeter Independent On Off Switch SAE USB Adapter Inline 10A Fuse Waterproof 6.8A Dual QC3.0 Fast Charging Phone Tablet for 7/8inch Handlebar ATV

Features

• Efficient Charge: Dual USB port support QC 3.0 fast charging technology. Allow you to charge 2 devices silmultaneously. Allow you to charge two devices simultaneously at full speed with 5V 3.4A / 9V 2.5A / 12V 2A. If your device supports QC 3.0 fast charging or SCP and FCP Charging Technology. Then this device would be a best choice rather than the traditional 2.4A/3.1A Motorcycle Phone Charger. It works for all usb-powered devices. makes the charger 40% faster than conventional chargers.
• LED Voltmeter: It has a voltmeter on top, clearly shows the current readings of working volts, easily notice the voltage condition of the batteries. You can also check the item's on-off status by observe the LED light status. When you turn off the switch, the voltage will not display and vice versa.
• Independent On Off Switch: Some people would worry about the battery being drained off with the item powered on for a long while. This USB has an on off switch and we would recommend turning it off when you're not using it so that the battery will not drain off. This item is equipped with a waterproof rubber cap, it can keep the USB charger and switch from rain and dust by closing the caps when you are not using it. Great for all weather conditions.
• Easy Installation and Connection: 2 Power Method: A: The product is designed with an SAE interface, which can be connected directly to the battery with the original SAE interface. B. It is also equipped with a SAE/O Ring harness(built in a 10A inline fuse), which can be directly connected to the battery and is more convenient to install. 2 Installation options. A: Install to any 7/8inch handlebar with the O shape mounting bracket. B: Mount with pad bracket and screws, it can be mounted to almost any surface not only on the handlebar, but also on auto cars, trucks, boats, RVs, campers etc.
• Perfect Wire Length: Product length: 42.5 inch (from the pigtail of the item to the end of SAE receptacle), SAE to O ring wiring harness: 4.53 inch. It's long enough to connect to the battery. The Motorcycle SAE to USB phone Charger's input is 12 volt, and the output is 5V 3.4A / 9V 2.5A / 12V 2A for Both USB Port. Smart IC Adjust the output Electricity for your Device Automatically.

Description

Output: 5V / 3.4 A, 9V / 2.5 A, 12V / 2A Product material: ABS Independent On/Off Power Switch Wire Length:From the pigtail of the item to the end of the SAE receptacle: 42.5 inches),SAE to O ring wiring harness: 4.53 inches. This Dual USB QC3.0 Super Fast Charger powers two devices simultaneously. Featuring a built-in intelligent IC, it automatically optimizes output for safety. Even for non-fast-charging devices, the smart system ensures a secure charge without damaging your battery. Safe, smart, and efficient. It has a voltmeter on top, clearly shows the current readings of working volts, easily notice the voltage condition of the batteries. You can also check the item's on-off status by observe the LED light status. When you turn off the switch, the voltage will not display and vice versa. A waterproof, dustproof rubber cover protects the circuit, charger, and switch from rain and debris, extending service life in all weather conditions. Includes a 10A fused cable for safety. The SAE to O-ring harness connects the charger directly to battery terminals for a secure, reliable link. Designed with an SAE interface, it connects directly to original battery leads. The 42.5IN cable provides ample length for easy, flexible installation The top-mounted voltmeter clearly displays real-time battery voltage and LED light status.Turning off the switch hides the reading for easy monitoring

Brand: Nilight

Connector Type: USB Type A

Compatible Devices: GPS, Smartphones, Tablets

Compatible Phone Models: all

Included Components: Motocycle USB Adapter, SAE Extension Cable, Handlebar Mounting Bracket, Screw Mounting Bracket, Non-slip Washer, Large Screw, Small Screw, Handlebar Fixing Screw See more

Special Feature: Water Resistant

Color: USB Charger Motorcycle

Input Voltage: 12 volts_of_direct_current

Amperage: 10 A

Total USB Ports: 2

Connector Type: USB Type A

Compatible Devices: GPS, Smartphones, Tablets

Compatible Phone Models: all

Special Features: Water Resistant

Input Voltage: 12 volts_of_direct_current

Amperage: 10 A

Total Usb Ports: 2

Wattage: 10 watts

Output Current: 3.4 A

Output Voltage: 5 volts

Power Source: Battery Powered

Current Rating: 3.1 A

Main Power Connector Type: 2 Pin

Number of Power Levels: 1

Total USB 2.0 Ports: 2

Power Plug: No Plug

Connectivity Technology: wired

Mounting Type: Handlebar Mount

Total USB 3.0 Ports: 2

Specification Met: SAE

Brand: Nilight

Built-In Media: Motocycle USB Adapter, SAE Extension Cable, Handlebar Mounting Bracket, Screw Mounting Bracket, Non-slip Washer, Large Screw, Small Screw, Handlebar Fixing Screw

Model Number: 90321B

Mfr Part Number: 90321B

Manufacturer: Nilight

UPC: 840323901727

Global Trade Identification Number: 27

Warranty Description: 2 Year Warranty

Number of Items: 1

Item Weight: 5.28 ounces

Unit Count: 1 Count

Color: USB Charger Motorcycle

Enclosure Material: Plastic With Rubber Components