Night Vision Goggles PS15 Gen 2+, Infrared Night Vision Binoculars for Adults - for Hunting, Spy, Military, Tactical, Security

Features

• Package include:1 x Night Vision Goggle, 1 x Protective carrying bag,1 x Instruction manual, 1 x Lens cleaning cloth, 1 x User Manual, 1 x Desiccant.
• Product size: The size of the DB2021 night vision device is 128X110X55mm.
• Ergonomic design: non-slip and lightweight body, very comfortable to hold with both hands, not only durable but also fine workmanship. The wide eyepiece design, if used for a long time, is more comfortable to watch and reduces the dryness of the eyes.
• Flexible use method: It can be used with head-mounted, helmet-mounted, or handheld. The device switch is a knob-type power switch.
• NOTE: When the surrounding light intensity exceeds 40Lux, the power supply of the device will be automatically turned off within 10 seconds to prevent damage to the image intensifier.This device has protection system.

Description

They utilize two high performance image intensifier tubes to provide extremely clear and crisp images under the darkest conditions. A built-in IR illuminator lets the users easily read a map and function in a total darkness environment. It can be used handheld, head mounted or helmet mounted for hands-free, or attached to a camera or camcorder for nighttime photography and law enforcement to document. This system enables walking, driving, short-range surveillance, map reading, vehicle maintenance, and administering first aid in both moonlight and starlight. With automatic protective system controls, the monocular will shut off automatically if the illumination level surpasses 40lux for the following 10seconds. And automatic brightness adjustment system always keeps IIT brightness level constant.They're easily replaced with 3x,5x,6x lens for enhanced range performance. The device will turn off automatically when pushing a button on the side of mount and lifting the unit up until reaches in the top position. Push the same button to lower monocular to the viewing position, then the device will turn on for continuation of operation. IP66 weatherproof: The device can prevent the domestic water. No power consumption when in standby: It means no power consumption in case you forget to remove the battery for some days. Embedded spring in battery's cap: It makes screwing the cap easier and better protects the spring and contact with the battery. The head mount can be adjusted according to head size. Automatic brightness control: When the ambient light changes, the brightness of the image detected will keep the same to insure a stable viewing effect and also to protect users' eyesight. Low battery indication: A greenish light in the edge of eyepiece will start flickering when the battery is running low. 1. According to the positive and negative indications on the battery compartment, correctly place a 3V lithium battery (CR123). 2. Remove the protective cover of the objective lens first when using it at night. Note: If you need to test the equipment during the day or under strong light conditions, do not remove the protective cover of the objective lens. You can observe the target through the small hole on the protective cover of the objective lens, and the use time should not exceed 10 minutes. 3. Slightly press down the power switch to push the gear to ON to start the power, and you can observe the green power indicator at the edge of the green fluorescent screen through the eyepieces (the light flashes when the battery voltage is low). When the ambient light is not enough, push the power switch down to IR to start the infrared. At this time, the infrared indicator light is on at the edge of the phosphor screen, and the infrared auxiliary light source also emits red light and automatically focuses. Note: When the infrared is turned on, the light emitted from the infrared auxiliary light source can be found by people who are also using night vision devices. 4. When locking the observation target, first adjust the objective lens by rotating the objective lens focusing ring, adjust the image effect to the relatively best position, and then adjust the eyepiece by rotating the eyepiece focusing ring, and also adjust the image to a relatively maximum Optimal position, usually the image can achieve the best effect after repeated adjustments for three times. 5. During the observation process, when the environmental detector detects that the surrounding illuminance exceeds 40 LUX, the power supply of the equipment will be automatically turned off within 10 seconds to prevent damage to the image intensifier. 6. After use, press the power switch to push it to OFF, and the night vision device will stop working at this time.

Brand: Teslord

Age Range (Description): Adult

Special Feature: Night Vision

Objective Lens Diameter: 25.8 millimeters

Magnification Maximum: 1 x

Features: Night Vision

Objective Lens Diameter: 25.8 millimeters

Magnification Maximum: 1 x

Mount Type: adjustable mounting system

Prism Type: Roof Prism

Exit-Pupil Diameter: 2.63 millimeters

Coating: Multi-Coated

Water Resistance Level: Waterproof

Focus Type: Individual Focus

Zoom Ratio: 1x

Field of View: 40 degrees

Apparent Angle of View: 40 degrees

Focus Description: Manual

Low Light Technology: Infrared

Item Dimensions L x W x H: 5.04"L x 2.17"H

Item Weight: 628 g

Brand: Teslord

Age Range Description: Adult

Model Name: PS15

Manufacturer: Military optics

UPC: 707310955371

Number of Items: 1

Manufacturer Part Number: DB2021

Unit Count: 1 Count

Color: Black

Enclosure Material: Acrylonitrile Butadiene Styrene (ABS)