LASER TREE Laser Engraving Module, 10000mW(10W) Output Module with Air Assist System, Built-in FAC, Compressed Spot CNC Carving DIY Laser Master for Laser Cutter Engraving Machine Class 4, 12V
Condition: New
Buy Now, Pay Later
As low as
$30.00
/ mo
Learn more
- – 6-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
15 left in stock
Arrives
Monday, Jul 20
Size: LT-80W-AA Pro 12V
Features
- POWERFUL LASER MODULE - The LASER TREE diode laser module has 80W machine power and 10000mW optical output laser power. Directly engraving mirror stainless steel: no need to paint black; Super fast engraving speed: 304 stainless steel, up to 300mm/s with 45mm focus length; And remarkable cutting ability: cutting through 8mm thickness plywood by one pass at a speed of 1.5mm/s with 45mm focus length. Class level: Class 1
- UPGRADED LASER MODULE KIT - a. The laser module upgraded to a 6mm diameter bending air metal nozzle which better reduces air resistance. Cut faster deeper, and cleaner; b. Upgraded a magnetic removable eye cover - Effective blue light filtering while cutting and engraving; c. The top of the module adds fan protection and an air tube holder 2-in-1 stainless steel piece;
- ORIGINAL DIODE with FAC - The Blue Laser module with original diode, high stability, high efficiency,20,000 hours lifetime! Built-in FAC to make the beam size much smaller at focus, with super cutting penetration and precision, power density increase 4~5times, and the engraving speed increase 4~5 times accordingly. At the same time, the precision increase 4~5 times also. can directly engrave smooth stainless steel metal and ceramics.
- EASY TO USE - Multi-hole position on the back of laser engraver module, easy to install on different laser cutting and engraving machine stands. Extra equipped with adapter board that is compatible with different voltages and pins between the machine and the module. Excellent compatibility with DIY machines and other brand laser engraving machines, laser cutting machines, CNC routers, and 3D printer machines.
Brand: LASER TREE
Material: Aluminum, Plastic
Color: Lt-80w-aa Pro 12v Kit
Product Dimensions: 4.29"L x 1.57"W
Style: Laser
Brand Name: LASER TREE
Manufacturer: LASER TREE
Manufacturer Warranty Description: 1 year
Model Number: LT-80W-AA Pro 12V
Manufacturer Part Number: LT-80W-AA Pro
Item Type Name: LT-80W-AA Pro 12V
Color: Lt-80w-aa Pro 12v Kit
Style Name: Laser
Item Dimensions L x W: 4.29"L x 1.57"W
Item Weight: 450 Grams
Operation Mode: Manual
Material Type: Aluminum, Plastic
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Monday, Jul 20
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Size: LT-80W-AA Pro 12V
I bought this laser to upgrade my Nasum A5 Pro, whose puny 5W laser required two passes to cut 3mm basswood. The box contains the laser unit itself, a sliding mounting plate in two parts (one attaches to the carriage, the other to the laser head, a few screws with matching hex wrenches, a power adapter board with cable, a few acrylic focus spacers, and a replacement lens. Attaching the mounting plate to the Nasum carriage would not have been possible without reusing two screws from the previous mounting plate; as it is I could have used two more. I would have appreciated finding the corresponding screws in the box. Two thumbscrews secure the laser plate to the carriage holder and allow for easy focus adjustment, this is very handy. There are two versions of the laser head on this page, 12V and 24V. They look identical, apparently the 24V version see a lot of returns, probably because most controllers on inexpensive engraving tables feed 12V to the laser head. The included voltage adapter can be used to convert 12V into 24 or vice versa if needed, of course at the expense of another board and more wires -- so make sure you check the voltage and pinout on your controller before ordering. The Nasum A5 Pro uses the same connector and 12V, so it was an easy replacement and I don't need to use the adapter board (I could have done with a cheaper version WITHOUT the board, and maybe with a couple more screws instead!) The hose of my air assist pump connected easily to to the brass nozzle and it works great. Finally, the optical protection attaches magnetically to the bottom of the unit. Overall, install took roughly 15 minutes, easy peasy. I ran a few tests and it essentially cuts twice as fast as the original 5W laser: card stock cuts at 2000mm/minute at 50% (instead of 1000mm/m at 50% with the 5W) and the edges are perfect; basswood cuts in a single pass at 200mm/m at 100% instead of requiring two passes at the same speed with the 5W. So, a very worthy upgrade I'm very pleased with.
...
show more
Reviewed in the United States on October 29, 2023 by esanta
Size: LT-80W-AA Pro 12V
First off, I'll say this has been an incredible upgrade from my old 5.5w diode. It's easily 4x faster than before as well as being able to actually cut through 3mm wood in one pass. That being said... be careful not too long away for long if you're using the magnetic eye shield. I did, and almost paid big time even sitting 5 feet away. A piece that cut out was sticking up and caught the eye shield, partially knocking it off. It somehow wedged between the laser module and the work piece. I noticed a burning smell and looked over to see a nice little fire going. The eye shield was destroyed along with the work piece, thankfully that was all. That said, I definitely recommend this for your next upgrade. Just be safe, and aware.
...
show more
Reviewed in the United States on August 1, 2024 by Rusty
Size: LT-80W-AA Pro 12V
Worked right off the bat after mounting. My laser is a 12v 3pin. Worked perfectly. I'll even say that this laser is a lot better than the Atomstack M50-10w I bought for almost a $100 more. This laser cut through 3mm basswood at 90% power and 750mm/m. 2 passes...The M50 was 100% power and 500mm/m, 3 passes. The fixed focus on this is a little longer than the old head meaning the laser is above the work piece more.. I like that. Hoping with the lesser power it will last longer than the M50 did.
...
show more
Reviewed in the United States on March 23, 2024 by Roger C
Size: LT-80W-AA Pro 12V
This doubled the laser power of my AtomStack A5 Pro. Lasertree provided instructions for installation and use. They also provided focusing shims in 3, 4 and 5 mm so the laser can be focused based on material thickness and operation (cut vs engrave). The installation was a breeze, though I did have to remove my z axis adjuster. Everything else was a straight bolt-up. I did place the driver board atop the x axis carriage using double sided foam tape,
...
show more
Reviewed in the United States on September 3, 2025 by TimG45
Size: LT-80W-AA Pro 12V
10W output Laser works great
Reviewed in the United States on December 9, 2025 by Terry Schade
Size: LT-80W-AA Pro 12V
Doesn’t fit Ortur 2 bed. See pics, the needed additional bracket for the laser make it hit the rail and strips the belt until you unplug it:/. I’m sure with major modification it would work, just not really an easy convert. Laser itself, great as a true 10w laser. I was able to etch glass, burn a crisp picture. So laser awesome and did plug right in. I ended up getting a different one.
...
show more
Reviewed in the United States on November 14, 2024 Reviewed in the United States on November 14, 2024 by Sean Stevens
Size: LT-80W-AA Pro 12V
I just got it hooked up today and have been using it for about four hours so far so good packaging was awesome. I would definitely give it a five star at this point time will tell.
Reviewed in the United States on April 11, 2026 by john sellung
Size: LT-80W-AA Pro 12V
The laser seems to work well and is a good upgrade from my 4.5w but it is not a drop in replacement. I have an Ortur Laser Master 2 (OLM2-S2-LF) and I needed to 3D print some parts so it would mount correctly and not interfere with the Y-limit switch.
Reviewed in the United States on September 27, 2023 by Rick78