Kanto PMX700 Pro Series Full Motion Articulating TV Wall Mount for 42-inch to 100-inch TVs | Adjustable Positioning | Integrated Cable Management | Toolless Tilt
Checking for changes
Product info up-to-date
Product info updated
We've detected that this product is out of stock. Enter your email below and we will notify you when it is available.
Promotional Offer
Estimations exclude tax, and assume no other Klarna balances. Non-promotional balances have a 19.99% APR and a $2 monthly minimum interest charge. Accounts are subject to credit approval, and issued by WebBank, member FDIC.
HORIZONTAL OFFSET All PMX mounts feature a segmented design that allows the arm assembly to be easily removed and positioned, independent of the wall plate. This setup makes it easier to center your television, regardless of the location of the studs.
EASY INSTALLATION Installing a PMX TV mount is quick and easy. Weighing less than 10 pounds, the wall plate can be installed unassisted. The arm assembly can then be hooked into place before securing it with the provided hardware.
TOOLLESS TILT The PMX series features a specially designed tilt mechanism that allows for precise adjustments to be made without the need of tools. Set the tension to allow for finger-tip adjustments, or lock it in place at the desired angle.
SUPERIOR EXTENSION This wall mount is made from solid steel and has heavy-duty wishbone arms that allow maximum extension and support, even for larger televisions.
CONVENIENT BOLT PACK The PMX700, along with the other TV mounts in the PMX Series, is carefully packaged with all the lag bolts, anchors, washers, and spacers needed for both wood studs and concrete walls.
Description
Don’t let the size of your TV dictate where you put it.
Capable of supporting TVs up to 100”, the PMX700 features two articulating
arms that can be horizontally offset to give you the utmost discretion over
where your TV is placed. With 31.3” of extension, this full motion wall mount
provides enough tilt and swivel movement to ensure you always have the perfect
viewing angle. Its low profile design allows your TV to sit 2.6” from the wall
when fully retracted and features cable management clips to keep your cables
out of sight. Easily reach over fireplaces or out of recessed locations.
Swivel and tilt your TV to improve line-of-sight. Make on-the-fly tilt
adjustments to reduce glare and improve line-of-sight. Center your TV on the
wall regardless of where your studs are located. Read more Supported TV Size
37” - 80” 39” - 80” 42” - 100” VESA Compatible 200x100 to 600x400 200x100 to
700x400 200x100 to 700x500 Max TV Weight Up to 125 lb (57 kg) Up to 125 lb (57
kg) Up to 150 lb (68 kg) Swivel 90° of swivel in either direction 90° of
swivel in either direction 90° of swivel in either direction Profile 2.5” (6.3
cm) from the wall 2.5” (6.3 cm) from the wall 2.6” (6.6 cm) from the wall
Extension Up to 22” (55.9 cm) from the wall Up to 24” (61 cm) from the wall Up
to 31.3” (79.5 cm) from the wall Integrated Cable Management ✓ ✓ ✓ Wall Plate
23.2" (59 cm) wall plate 28.9" (73.3 cm) wall plate 32.4" (82.3 cm) wall plate
Adjustable Horizontal Offset ±6” (15.2 cm) ±9” (22.8 cm) ±11” (27.9 cm)
Brand Name: Kanto
Item Weight: 46.7 pounds
Product Dimensions: 32.4 x 31.3 x 19.7 inches
Item model number: PMX700
Is Discontinued By Manufacturer: No
Color Name: Black
Special Features: Cable Management, Adjustable Horizontal Positioning
This product includes free shipping to all US addresses.
Delivery
Unless otherwise stated above, most products arrive within 2-3 business days. Larger items may take 6-9 business days. Tracking information will be automatically provided as soon as your order ships.
HORIZONTAL OFFSET All PMX mounts feature a segmented design that allows the arm assembly to be easily removed and positioned, independent of the wall plate. This setup makes it easier to center your television, regardless of the location of the studs.
EASY INSTALLATION Installing a PMX TV mount is quick and easy. Weighing less than 10 pounds, the wall plate can be installed unassisted. The arm assembly can then be hooked into place before securing it with the provided hardware.
TOOLLESS TILT The PMX series features a specially designed tilt mechanism that allows for precise adjustments to be made without the need of tools. Set the tension to allow for finger-tip adjustments, or lock it in place at the desired angle.
SUPERIOR EXTENSION This wall mount is made from solid steel and has heavy-duty wishbone arms that allow maximum extension and support, even for larger televisions.
CONVENIENT BOLT PACK The PMX700, along with the other TV mounts in the PMX Series, is carefully packaged with all the lag bolts, anchors, washers, and spacers needed for both wood studs and concrete walls.
Description
Don’t let the size of your TV dictate where you put it.
Capable of supporting TVs up to 100”, the PMX700 features two articulating
arms that can be horizontally offset to give you the utmost discretion over
where your TV is placed. With 31.3” of extension, this full motion wall mount
provides enough tilt and swivel movement to ensure you always have the perfect
viewing angle. Its low profile design allows your TV to sit 2.6” from the wall
when fully retracted and features cable management clips to keep your cables
out of sight. Easily reach over fireplaces or out of recessed locations.
Swivel and tilt your TV to improve line-of-sight. Make on-the-fly tilt
adjustments to reduce glare and improve line-of-sight. Center your TV on the
wall regardless of where your studs are located. Read more Supported TV Size
37” - 80” 39” - 80” 42” - 100” VESA Compatible 200x100 to 600x400 200x100 to
700x400 200x100 to 700x500 Max TV Weight Up to 125 lb (57 kg) Up to 125 lb (57
kg) Up to 150 lb (68 kg) Swivel 90° of swivel in either direction 90° of
swivel in either direction 90° of swivel in either direction Profile 2.5” (6.3
cm) from the wall 2.5” (6.3 cm) from the wall 2.6” (6.6 cm) from the wall
Extension Up to 22” (55.9 cm) from the wall Up to 24” (61 cm) from the wall Up
to 31.3” (79.5 cm) from the wall Integrated Cable Management ✓ ✓ ✓ Wall Plate
23.2" (59 cm) wall plate 28.9" (73.3 cm) wall plate 32.4" (82.3 cm) wall plate
Adjustable Horizontal Offset ±6” (15.2 cm) ±9” (22.8 cm) ±11” (27.9 cm)
Brand Name: Kanto
Item Weight: 46.7 pounds
Product Dimensions: 32.4 x 31.3 x 19.7 inches
Item model number: PMX700
Is Discontinued By Manufacturer: No
Color Name: Black
Special Features: Cable Management, Adjustable Horizontal Positioning
This product includes free shipping to all US addresses.
Delivery
Unless otherwise stated above, most products arrive within 2-3 business days. Larger items may take 6-9 business days. Tracking information will be automatically provided as soon as your order ships.
HORIZONTAL OFFSET All PMX mounts feature a segmented design that allows the arm assembly to be easily removed and positioned, independent of the wall plate. This setup makes it easier to center your television, regardless of the location of the studs.
EASY INSTALLATION Installing a PMX TV mount is quick and easy. Weighing less than 10 pounds, the wall plate can be installed unassisted. The arm assembly can then be hooked into place before securing it with the provided hardware.
TOOLLESS TILT The PMX series features a specially designed tilt mechanism that allows for precise adjustments to be made without the need of tools. Set the tension to allow for finger-tip adjustments, or lock it in place at the desired angle.
SUPERIOR EXTENSION This wall mount is made from solid steel and has heavy-duty wishbone arms that allow maximum extension and support, even for larger televisions.
CONVENIENT BOLT PACK The PMX700, along with the other TV mounts in the PMX Series, is carefully packaged with all the lag bolts, anchors, washers, and spacers needed for both wood studs and concrete walls.
Description
Don’t let the size of your TV dictate where you put it.
Capable of supporting TVs up to 100”, the PMX700 features two articulating
arms that can be horizontally offset to give you the utmost discretion over
where your TV is placed. With 31.3” of extension, this full motion wall mount
provides enough tilt and swivel movement to ensure you always have the perfect
viewing angle. Its low profile design allows your TV to sit 2.6” from the wall
when fully retracted and features cable management clips to keep your cables
out of sight. Easily reach over fireplaces or out of recessed locations.
Swivel and tilt your TV to improve line-of-sight. Make on-the-fly tilt
adjustments to reduce glare and improve line-of-sight. Center your TV on the
wall regardless of where your studs are located. Read more Supported TV Size
37” - 80” 39” - 80” 42” - 100” VESA Compatible 200x100 to 600x400 200x100 to
700x400 200x100 to 700x500 Max TV Weight Up to 125 lb (57 kg) Up to 125 lb (57
kg) Up to 150 lb (68 kg) Swivel 90° of swivel in either direction 90° of
swivel in either direction 90° of swivel in either direction Profile 2.5” (6.3
cm) from the wall 2.5” (6.3 cm) from the wall 2.6” (6.6 cm) from the wall
Extension Up to 22” (55.9 cm) from the wall Up to 24” (61 cm) from the wall Up
to 31.3” (79.5 cm) from the wall Integrated Cable Management ✓ ✓ ✓ Wall Plate
23.2" (59 cm) wall plate 28.9" (73.3 cm) wall plate 32.4" (82.3 cm) wall plate
Adjustable Horizontal Offset ±6” (15.2 cm) ±9” (22.8 cm) ±11” (27.9 cm)
Brand Name: Kanto
Item Weight: 46.7 pounds
Product Dimensions: 32.4 x 31.3 x 19.7 inches
Item model number: PMX700
Is Discontinued By Manufacturer: No
Color Name: Black
Special Features: Cable Management, Adjustable Horizontal Positioning
Date First Available: July 14, 2016
Shipping
This product includes free shipping to all US addresses.
Delivery
Orders placed now will arrive in 6-9 business days. Tracking information will be automatically provided as soon as your order ships.
By Michael J. M. - Reviewed in the United States on October 29, 2020
It was easy!
I paid more because I wanted a high quality mount for my nice new TV. This delivered. Most of the work can be done by one person. The only part that requires two is when you attach the TV to the mount and set the tilt for the first time. Those 10 min would be impossible by yourself. The joint feels loose and the lever that you are supposed to be able to use to tighten it and loosen the joint to control tilt doesn't really work (it sort of functions like the quick release on your bike seat or wheels with a leaver) so you need someone to support the TV while you tighten it for the first time. Once set however, I have never had to touch it again. I had two reasons for getting the articulated mount. 1) Sometimes we eat in the media room at a table. It is great to be able to put the TV (85") from the wall and tilt it away from the couch and to the TV. 2) I was flipping my room around from watching TV on the North wall to the South wall. This meant many weekends crawling through the attic feeding wires through walls with wires coming from various locations. One weekend it was speakers, next coax and Ethernet, next power bridge. It was soooooo easy just pulling the TV away from the wall so that I could perform the work, cut holes in the wall behind the TV and media cabinet and then just push it back. I was quoted $650 to do this work but the mount made it possible to do it all myself. I guess I could have done all the wiring before the TV was mounted but the TV was on sale for labor day and we enjoyed the TV for 4 weeks while I did all the work to make the set up better and better and better each week until done. THANKS!
5.0 out of 5 stars
By A. Sprague - Reviewed in the United States on September 30, 2020
Quality and sturdy mounting solution for walls with studs in non-ideal positions
Let me start by saying that this thing is built like a tank. My 65" LED TV is rock solid and stable no matter how far the arm is extended and no matter what the tilt angle is set to. It simply stays where placed, and it moves fluidly and easily. What attracted me to this mount over some lower priced mounts is its ability to adjust for an off-center mounting position on a wall yet still have a centered TV. The wall I wanted to mount on (about 6 inches wider than the TV) had a stud almost exactly in the center of it. Which seems good until you realize that most mounts are NOT designed to have a stud in the exact center. Actually, none I could find were designed with mounting holes 32 inches apart. On this unit the TV arm can be offset further from the center of the wall mount portion than any other unit I could find. The end result of my installation is that, when the TV is pushed up as close to the wall as the mount allows, it is within 1/4 inch of dead center on the wall. The 65" TV is plenty wide enough that you do not see the mount, so you also do not see that the wall mount frame is off-center on the wall by 6+ inches. This was exactly what I was hoping for. The quality of construction is top notch - seriously heavy duty! The built-in cable management features are also very good and not flimsy at all. The packaging was also super nice - far better than it needed to be honestly. In short, everything about this mount just exudes quality. Even the provided wall template is amazing. It shows an accurate diagram of the ENTIRE wall mount portion so you can really visualize exactly where everything is going to be. It is true to size and shape of the mount itself, so the holes I drilled based on the template were perfectly aligned with the actual mount. If you do not mind spending the extra money, you will love this mount.
5.0 out of 5 stars
By D-man - Reviewed in the United States on July 29, 2020
THE Wall-mount for Large, Heavy TVs
Though I had an installer put this on, it was only because I was pressed for time. It's very easy to install. Holds every bit of the weight claimed and is very adjustable. If you're like me, you'll appreciate the clean, professional look when it's extended. This holds a 100+lb 85" TV like it's a painting. Very easy to move, tilt, and push all the way back. My top pro is that when pushed all the way back, it's almost as thin as typical tilt-only mounts. Most mounts for TVs this size don't collapse to under 3" like this one does. Special item of note: This thing is heavy as indicated in the product description. Don't let that deter you. It comes apart into a few large pieces for assembly. The bracket that connects to the TV comes with all the parts and is the easiest ever installed on any of my TVs. Don't forget to use the template to mount and catch drywall dust/bits - it works. This costs more than other mounts for a reason - it's that well-made.
5.0 out of 5 stars
By Brian - Reviewed in the United States on August 30, 2017
Well designed with horizontal ajdustment
This is a very well designed product with impeccable packaging that clearly identifies the parts. Between several TVs and multiple moves, I've installed many wall mounts, including multiple "full motion" mounts. The unique aspect of this mount is that it allows for horizontal adjustment of the center position relative to the location of the mount to the studs. The usual method for making this sort of adjustment is to add either plywood or framing between stud locations. This bracket avoids that difficulty. That alone (in labor and time savings) justifies the increased price for me. What I did not expect is the quality of materials, packaging, and instructions. Kanto's designers or engineers clearly took extra time to make sure the details of this product exceed expectations. The adjustments are easy to make and the mount is very sturdy, even with an older, heavy 65" plasma TV. I highly recommend the product.
5.0 out of 5 stars
By Edward E. Stilwell Jr. - Reviewed in the United States on December 4, 2019
The Best TV wall mount!!!
Received the Kanto PMX700 Pro Series Full Motion Articulating TV Wall to hang a 65" TV ... The installation was the simplest I have ever installed. Previously I had wall hung 5 other TV's with much cheaper wall mounting systems which were no where near the quality or as easy to install as the Kanto. Installation time for me took about 1 hr and 15 minutes. The installation only took myself until I hung the TV on the mount then I needed help to get it up on the wall mount. Don't hesitate buying this product if you truly want quality. I am very pleased with their product and totally recommend this product. Also the seller WORLD WIDE STEREO through Amazon was fast with shipping and delivered well boxed and in perfect condition.
Top Reviews
5.0 out of 5 stars
By Michael J. M. - Reviewed in the United States on October 29, 2020
It was easy!
I paid more because I wanted a high quality mount for my nice new TV. This delivered. Most of the work can be done by one person. The only part that requires two is when you attach the TV to the mount and set the tilt for the first time. Those 10 min would be impossible by yourself. The joint feels loose and the lever that you are supposed to be able to use to tighten it and loosen the joint to control tilt doesn't really work (it sort of functions like the quick release on your bike seat or wheels with a leaver) so you need someone to support the TV while you tighten it for the first time. Once set however, I have never had to touch it again. I had two reasons for getting the articulated mount. 1) Sometimes we eat in the media room at a table. It is great to be able to put the TV (85") from the wall and tilt it away from the couch and to the TV. 2) I was flipping my room around from watching TV on the North wall to the South wall. This meant many weekends crawling through the attic feeding wires through walls with wires coming from various locations. One weekend it was speakers, next coax and Ethernet, next power bridge. It was soooooo easy just pulling the TV away from the wall so that I could perform the work, cut holes in the wall behind the TV and media cabinet and then just push it back. I was quoted $650 to do this work but the mount made it possible to do it all myself. I guess I could have done all the wiring before the TV was mounted but the TV was on sale for labor day and we enjoyed the TV for 4 weeks while I did all the work to make the set up better and better and better each week until done. THANKS!
5.0 out of 5 stars
By A. Sprague - Reviewed in the United States on September 30, 2020
Quality and sturdy mounting solution for walls with studs in non-ideal positions
Let me start by saying that this thing is built like a tank. My 65" LED TV is rock solid and stable no matter how far the arm is extended and no matter what the tilt angle is set to. It simply stays where placed, and it moves fluidly and easily. What attracted me to this mount over some lower priced mounts is its ability to adjust for an off-center mounting position on a wall yet still have a centered TV. The wall I wanted to mount on (about 6 inches wider than the TV) had a stud almost exactly in the center of it. Which seems good until you realize that most mounts are NOT designed to have a stud in the exact center. Actually, none I could find were designed with mounting holes 32 inches apart. On this unit the TV arm can be offset further from the center of the wall mount portion than any other unit I could find. The end result of my installation is that, when the TV is pushed up as close to the wall as the mount allows, it is within 1/4 inch of dead center on the wall. The 65" TV is plenty wide enough that you do not see the mount, so you also do not see that the wall mount frame is off-center on the wall by 6+ inches. This was exactly what I was hoping for. The quality of construction is top notch - seriously heavy duty! The built-in cable management features are also very good and not flimsy at all. The packaging was also super nice - far better than it needed to be honestly. In short, everything about this mount just exudes quality. Even the provided wall template is amazing. It shows an accurate diagram of the ENTIRE wall mount portion so you can really visualize exactly where everything is going to be. It is true to size and shape of the mount itself, so the holes I drilled based on the template were perfectly aligned with the actual mount. If you do not mind spending the extra money, you will love this mount.
5.0 out of 5 stars
By D-man - Reviewed in the United States on July 29, 2020
THE Wall-mount for Large, Heavy TVs
Though I had an installer put this on, it was only because I was pressed for time. It's very easy to install. Holds every bit of the weight claimed and is very adjustable. If you're like me, you'll appreciate the clean, professional look when it's extended. This holds a 100+lb 85" TV like it's a painting. Very easy to move, tilt, and push all the way back. My top pro is that when pushed all the way back, it's almost as thin as typical tilt-only mounts. Most mounts for TVs this size don't collapse to under 3" like this one does. Special item of note: This thing is heavy as indicated in the product description. Don't let that deter you. It comes apart into a few large pieces for assembly. The bracket that connects to the TV comes with all the parts and is the easiest ever installed on any of my TVs. Don't forget to use the template to mount and catch drywall dust/bits - it works. This costs more than other mounts for a reason - it's that well-made.
5.0 out of 5 stars
By Brian - Reviewed in the United States on August 30, 2017
Well designed with horizontal ajdustment
This is a very well designed product with impeccable packaging that clearly identifies the parts. Between several TVs and multiple moves, I've installed many wall mounts, including multiple "full motion" mounts. The unique aspect of this mount is that it allows for horizontal adjustment of the center position relative to the location of the mount to the studs. The usual method for making this sort of adjustment is to add either plywood or framing between stud locations. This bracket avoids that difficulty. That alone (in labor and time savings) justifies the increased price for me. What I did not expect is the quality of materials, packaging, and instructions. Kanto's designers or engineers clearly took extra time to make sure the details of this product exceed expectations. The adjustments are easy to make and the mount is very sturdy, even with an older, heavy 65" plasma TV. I highly recommend the product.
5.0 out of 5 stars
By Edward E. Stilwell Jr. - Reviewed in the United States on December 4, 2019
The Best TV wall mount!!!
Received the Kanto PMX700 Pro Series Full Motion Articulating TV Wall to hang a 65" TV ... The installation was the simplest I have ever installed. Previously I had wall hung 5 other TV's with much cheaper wall mounting systems which were no where near the quality or as easy to install as the Kanto. Installation time for me took about 1 hr and 15 minutes. The installation only took myself until I hung the TV on the mount then I needed help to get it up on the wall mount. Don't hesitate buying this product if you truly want quality. I am very pleased with their product and totally recommend this product. Also the seller WORLD WIDE STEREO through Amazon was fast with shipping and delivered well boxed and in perfect condition.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.