Search  for anything...
iSANMATE

iSANMATE PLA 3D Printer Filament, PLA Filament 1.75mm Bundle Dual Color Filament Silk PLA, Dimensional Accuracy +/- 0.03 mm, 250g x 4 Pack

  • Based on 5,101 reviews
Condition: New
Checking for the best price...
$21.41 Why this price?
Save $2.38 was $23.79

Buy Now, Pay Later

As low as $5 / mo
  • – 4-month term
  • – No impact on credit to apply
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout.

Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Zip, Apple Pay, and Google Pay. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

FREE 30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: 20 left in stock
Fulfilled by Amazon
Arrives Sunday, Aug 23
Order within 18 hours and 38 minutes
Available payment plans shown during checkout
Protection Plan Protect Your Purchase
Checking for protection plans...

Recently Viewed

Color: A- Rose Red+blue, Yellow+blue, Red+black, Gold+purple


Features

  • Dual Color Filament- Colour change effect will make you get a magic model and attract everyone's attention.Color: (Rose Red+Blue, Yellow+Blue, Red+Black, Gold+Purple)
  • Premium PLA +- iSANMATE 3d filament without warping, clog-free, bubble-free and easy-to-use, smooth and delicate, less entanglement by machine winding, no tangling and easy to feed. with excellent layer adhesion, and easy support removal, and works perfectly with most FDM 3d printers on the market;
  • Recommended Printing Conditions- The Printing Temp is 190C-220C (depending on the printer model)which is wider than typical PLA, Printing speed: 40-130mm/s. Hot bed temperature: 45 60C;
  • PLA Sealed Package- Silk filament will be dryed for 24 hours before packaging, then packed with Vacuumed Sealed. Since the PLA filament is easily damp, please store it in a resealable aluminum foil bag after opening to maintain excellent printing performance;
  • [Compatibility]-You dont have to worry that it will be incompatible with your 3D printer 1.75 mm in diameter, dimensional accuracy +/- 0.03 mm. It works perfectly with most FDM 3d printers on the market.

Description

iSANMATE offers PLA, PLA+, PETG, PVA, ABS, PC, PA, flexible TPU, PEEK, PPSU, PEI, and so on. iSANMATE filament is a new member of Amazon, but over the years our printer filaments have been sent to users around the world and have been well received. Now we supply high-quality printer filament at Amazon directly to you. We are confident that you will enjoy the printing when using the 1.75mm Filament. Tips: 1, Please make 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture. 2, Be sure to insert the free end of the PLA+ filament into the holes to avoid being tangled for next time use. 3, If there is no print plan within a few days, retract the filament to protect the printer nozzle. iSANMATE is committed to the highest quality standards in production and manufacturing. iSANMATE 3D Printer Filament was born out of the passion for technology and exploration of the future, while always placing customers at the heart of all development, and gives you the freedom to implement your projects and ideas by 3D printing. Yes, iSANMATE PLA+, PETG filament has ROHS and CE certificate. Yes. Our engineers have tested more than 98% of printers using 1.75mm filament, they are applicable. And also can be used to 3D pen. 1)Check the temp setting before printing, PLA temp about 190-225℃; 2)Check if the plate surface, it is recommended to apply PVA glue;

Brand: iSANMATE


Material: Polylactic Acid


Color: A- Rose Red+blue, Yellow+blue, Red+black, Gold+purple


Item Weight: 1.23 kg


Item Diameter: 1.75 millimeters


Brand Name: iSANMATE


Manufacturer Part Number: PLA-DC10


Unit Count: 35.27 Ounce


Manufacturer: iSANMATE


Number of Items: 4


Number of Packs: 4


Model Number: PLA-DC10


Warranty Description: 2 months


Item Weight: 1.23 kg


Item Diameter: 1.75 millimeters


Material Type: Polylactic Acid


Color: A- Rose Red+blue, Yellow+blue, Red+black, Gold+purple


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Sunday, Aug 23

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • Zip Pay in 4
  • Financing through Apple Pay
  • Financing through Google Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Excellent! Perfect color, printed perfectly as well.
Color: B- Clear-skyblue
Review Image by V
Filament was excellent! Perfect color, perfect transparency, printed perfectly. Looks very high quality. Exactly what I was looking for (really hard to find transparent light blue). A little bit pricey, but honestly not too bad overall since it was perfect. If you need a lighter blue transparent filament, this is exactly what you need. This is the only filament I could find in this color. Microcenter filament that’s darker blue is the same price so feels fair. If I end up needing more of a similar color I will definitely come back and buy some more. Printed on Ender 3 Pro. ... show more
Reviewed in the United States on June 15, 2026 by V
    • ~~DRY THE FILAMENT B4 USING~~
Color: B- Glow Green Pla
Review is for the: "iSANMATE 3D Printer Filament, PLA Filament Glow in The Dark, 1.75mm Dimensional Accuracy +/- 0.03 mm, 1 kg Spool" As with most any filament from the factory... it works best when dried for 10+ hours. Many people report how brittle this filament is & yes, wet filament is brittle. So, dry it first. Then it will work well. I have had great prints with the Glow filament. After charging off a Bright light for 20 minutes, it will last for a few hours. Thicker prints works best of course, as there is more product to glow. Good detail can be printed with this. Important to have the settings correct, as the Glow is actually a PLA+ which melts at a higher temp than PLA. Appears to be a bit stronger than PLA, but not like a CF or PETG. I would purchase again. Be sure to dry it first. ... show more
Reviewed in the United States on February 17, 2025 by Complimentary
    • Vibrant colors
Color: A- Color Pla Glow Orange, Green, Blue, a...
This filament is very nice. It has good adhesion and the colors are very vibrant. They definitely glow in the dark also.
Reviewed in the United States on July 9, 2026 by Wsmh66
    • Uneven and inconsistent dual extrusion and poor winding
Color: A- Gold+red,red+green,blue+silver,bronze...
The dual extrusion is so uneven and inconsistent that the prints look terrible. The unevenness (where it's more of one color than the other) causes the print to not have a side that is clearly one color. For other brands of dual extrusion filament, when you spin the print around, you can clearly see, for example, one side is red and the other is blue, and there's a transition between the colors for positions in between. For this one, one side was clearly gold and the other was silver and gold. The inconsistency (where it's not the same ratio throughout) causes the color changes to vary even from a single point of view. So looking at a single side, some layers are gold and some are silver, but it's basically random which layers are which color. This has the effect of the looking like the colors bleeding into each other without a smooth transition. The two poor effects together simply made the print look like it was originally one color and I accidentally spilled something on one side, staining it the other color. Because of these reasons, I only use the remaining filament for prototyping or parts that are not usually visible. Even this was hampered by poor winding. The filament seems to have been wound poorly causing the filament to tangle, which then prevented my printer from extruding the filament. This lead to prints that stopped putting out filament, but since the filament was still in the runout sensor (though not moving), the printer never stopped. This ruined a number of prints until I had to just rewind the filament myself onto a new spool. As a filament, it was fine, but for filament that's relegated to prototypes and hidden parts, I definitely overpaid. ... show more
Reviewed in the United States on August 10, 2023 by A Customer
    • Great filament when you learn how to use it
Color: B- Glitter Blue Violet Galactic
Review Image by Matthew
Review Image by Matthew
For as cheap as it was, it did have noticible issues with printing. However a slight tweak in settings was required. It took a 0.6 nozzle woth 0.2mm layer height, it is prone to clpgging otherwise. I set the extrusion temperature at 230°C and it is golden. It's a beautiful filament when you pearn how to use it. ... show more
Reviewed in the United States on April 15, 2026 by Matthew
    • Printed smoothly
Color: B- Glitter Blue Violet Galactic
This Filament printed very nicely. There was no tangling whatsoever. It wasn’t as transparent as I thought it would be, I would consider it semi-transparent. The glitter in it gave it just the right amount of sparkle. I had no clogging of my nozzle using glitter. First time trying this brand and will order iSanmate filament again. Good value for the money as I will get many beautiful prints from one spool. ... show more
Reviewed in the United States on July 5, 2026 by Janet C
    • Great Color Combo
Color: C- Gradient Bluish Green+purple
I love this filament for my dragons and large flexi toys. This gives me a Sully feel from Monsters Inc.
Reviewed in the United States on July 23, 2026 by Gubby0822
    • Spooling is bad
Color: C- Gradient Red+orange
Review Image by phtscrpcrzymom
The way this filament was spooled made printing hard! It was smushed at the corner at each row. Filament broke once during print from this. Filament itself is good but the spooling sucks and I won’t buy it again.
Reviewed in the United States on May 27, 2026 by phtscrpcrzymom

Can't find a product?

Find it on Amazon first, then paste the link below.
Checking for best price...