HANGKAI 2-Stroke 3.5HP Outboard Motor, 49CC Heavy Duty Fishing Boat Engine, 4000–5000RPM Short Shaft Marine Engine, Equipped with CDI Ignition System and Water Cooling System

Features

• Durable Construction & Fuel Efficiency Built from aluminum alloy and rubber with spray paint surface treatment, this outboard boat motor resists corrosion. Fuel tank capacity 1.3L (0.34gal) with consumption rate of 1.1L/h enjoy longer trips without constant refueling. Assembly required? No just mount and go. Choose this outboard motor for dependable performance and easy maintenance.
• Efficient Cooling & Ignition System Features a half watercooling, half aircooling system that prevents overheating during extended use. The CDI ignition ensures easy starts, while the manual start system gives you full control. Whether you need outboard boat motors for lakes or rivers, this outboard motor runs consistently on No.92 leadfree gasoline mixed with 2stroke oil (25:1 during breakin, 50:1 after).
• Lightweight & Portable 3.5 HP Outboard Motor Weighing only 9.8 kg (21.6 lbs), this 3.5 hp outboard motor is easy to carry and mount. Perfect for small boats, inflatables, or fishing dinghies. The hangkai outboard motor delivers reliable power with a 49cc 2-stroke engine producing 2.5KW max output ideal for calm waters and weekend adventures.
• User-Friendly Tiller Control with Clutch The tiller control system and manual clutch allow precise speed and direction adjustments. Max speed ranges from 40005000 RPM, with noise around 80DB quiet enough for a peaceful day on the water. The hangkai outboard motor also features a manual tilt system for easy trimming when navigating shallow areas.
• Compact Design with Essential Accessories Product size: 92*36*15cm (36*14.17*5.9in), fitting transom plates up to 42cm (16.53in) high. The 17cm (6.7in) propeller delivers thrust efficiently. Your 3.5 hp outboard motor comes with a tool kit, fuel mixing bottle, funnel, spare pull rope, and English manual everything you need to get on the water quickly.

Description

ApplicationIt is suitable for rubber boats, inflatable boats, fishing boats, sailboats, yachts, canoes, kayaks, rubber boats, aluminum alloy boats, etc. with a stern height of 16.53 inches or less, assisting aquaculture, water transportation, net fishing, luring, outboard backup, outings, and river cleaning/maintenance.SpecificationsMaterial: Aluminum Alloy, RubberColor: GreySurface Treatment: Spray PaintAssembly Required: NoNumber of Items: 1Engine: 2-stroke 3.5hpDisplacement: 49ccGear Ratio: 2.08(27:13)Number of Cylinders: 1Max. Output: 2.5KWMax. Speed: 4000-5000r/MinNoise: About 80DB Gear Positions: ClutchIgnition System: CDICooling System: Half Water-cooling, Half Air-coolingControl System: Tiller ControlStarting System: Manual StartGasoline: No.92 Lead-free GasolineFuel Type: Mixed Oil (Run-in Period: 25 Gasoline: 1 2-stroke Engine Oil; after Run-in Period: 50 Gasoline: 1 2-stroke Engine Oil)Trim And Tilt System: Manual TiltFuel Tank Capacity: 1.3L/0.34galFuel Consumption Rate: 1.1L/0.3gal/hPropeller Diameter: 17cm/6.7inJoystick Length: 41cm/16.14inHandle Length: 12cm/4.7inFixed Screw Spacing: 12cm/4.7inAdaptive Transom Plate Height: ≤42cm/16.53inGross Weight: 12kg/26.4lbsNet Weight: 9.8kg/21.6lbsProduct Size: 923615cm/3614.175.9inPackage Size: 954230cm/37.416.511.81inPackage Included1Outboard Motor1Tool Kit1Fuel Oil Mixing Bottle1Funnel1Spare Pull Rope1English ManualNotes1.Please carefully read the manual and strictly follow the precautions to have a better experience. 2.Please measure the height of your boat before purchasing to ensure suitability for this product.3.Please start the motor in the water. If the motor stops circulating water, please stop using it immediately and check the impeller of the water pump to see if the water outlet is blocked.4.Please do not leave this product outside until the cooling water is completely used up. Otherwise, water will enter the cylinder through the exhaust port, leading to engine failure. After cruising in seawater or turbid water, please clean the outboard motor with fresh water and cool the water channel with fresh water. The engine should be stored in a dry and well-ventilated place, and avoid direct exposure to sunlight.5.If not in use for a long time, please thoroughly clean the gasoline in the fuel tank.6.Two-stroke air-cooled engines must use TCW-2 engine oil, which must be specifically designed for outboard engines.7.Fuel mixture ratio: 25:1 for the first 50 hours, 50:1 after 50 hours.8.Two-stroke outboard engines must use a mixture of 92 gasoline and two-stroke engine oil.9.During the break-in period, the volume ratio of gasoline to oil is 25:1. 10.After the break-in period, the volume ratio of gasoline to oil is 50:1. 11.Important note: Gasoline and oil must be pre-mixed and thoroughly stirred before being poured into the fuel tank. 12.The outboard motor must be started in water, please do not start the engine on land.13.When starting the engine, loosen the vent screw on the fuel tank cap counterclockwise.14.When starting the outboard motor, insert the emergency stop rope and secure the other end to your wrist or belt15.The break-in period lasts approximately 10 hours or one month. Please avoid operating the engine at high throttle during the break-in period.16.After the break-in period, replace the gear oil. The second replacement should be performed after approximately 100 hours or six months.17.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

Brand: LTIGOAW

Color: Grey

Material: Aluminum Alloy, Rubber

Product Dimensions: 14.17"D x 5.9"W x 36"H

Number of Items: 1

Brand Name: LTIGOAW

Manufacturer: LTIGOAW

UPC: 740684683389

Manufacturer Part Number: 034681

Model Number: 034681

Manufacturer Warranty Description: 2 Year

Included Components: See details

Color: Grey

Material Type: Aluminum Alloy, Rubber

Item Dimensions D x W x H: 14.17"D x 5.9"W x 36"H