eSUN PLA PRO (PLA+) 3D Printer Filament, Dimensional Accuracy +/- 0.03mm, 1kg, Plastic Spool, 1.75mm, Orange
Condition: New
Checking for product changes
Buy Now, Pay Later
As low as
$6
/ mo
Learn more
- – 4-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
Eligible for Return, Refund or Replacement within 30 days of receipt
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Sunday, Jul 27
Size: 1.75mm
Color: Orange
Features
- 1KG net (approximately 2.2 lbs) Filament with Black Plastic Spool
- eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA.
- 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
- Recommended Extrusion/Nozzle Temperature 205C - 225C
- Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
Brand: eSUN
Material: pla
Color: Orange
Item Weight: 2.2 Pounds
Item Diameter: 1.75 Millimeters
Is Discontinued By Manufacturer : No
Product Dimensions : 8 x 3 x 8 inches; 2.2 Pounds
Item model number : IG-C-PLAPRO175O1
Department : Home
Date First Available : August 20, 2014
Manufacturer : ESUN
Best Sellers Rank: #705 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #31 in 3D Printing Filament
#31 in 3D Printing Filament:
Customer Reviews: 4.5 4.5 out of 5 stars 10,998 ratings
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Sunday, Jul 27
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Size: 1.75mm
Color: Black
I printed a lot of PLA over the last year, so when Intservo invited me to test a spool of the new eSUN PLA PRO (PLA+) filament in exchange for a comparison review, I agreed. I'm glad I did.... this PLA PRO (PLA+) will be the filament I buy from now on. The colors are very close to the old favorite eSUN PLA colors, but the PLUS colors are a bit richer and have a deeper tone, (as near as I can tell on the several colors that I bought for the testing). But the PLA PRO (PLA+) is a LOT stronger, and more flexible after printing. To strength-test it, I ran a print with the PLA PRO+ that I had consistently had trouble with just using plain PLA. The problem print has a latch that would snap under pressure when the support was removed. (Six times in a row - very frustrating.) The PLA PRO filament printed at a slightly higher temperature than the regular PLA, and it was.....creamier. (Sorry...not a terribly masculine word....but that's what it was.) It was strong enough that I was able to remove the support without breaking the latch off into my hand for the seventh time, and it flexes enough to allow the latch to close and open easily. No fear of it cracking again. The support was not overly clingy either, which I would have expected. But it came away cleaner than regular PLA supports. Definitely a pleasant surprise. I wanted to test it on overhangs as well, so I put it up against another print that had caused trouble for me with overhang curl and heat pitting on a curved bottom surface. The underside of the egg shaped print usually developed pitting, (even with support), in PLA. I absolutely didn't believe the results of this test...which was run with NO SUPPORT for the PLA PRO (PLA+) filament, on a smaller version (heat soak effect magnified), just to see what it would do. I'll put the pictures below, because otherwise, you won't believe it either. (Keep in mind, the bottom of the white PLA egg had support underneath it, and it still looks like a mountainside. The black PLA PRO egg showed a smooth surface with ZERO support, and the top of the egg did NOT collapse! I've NEVER been able to print that egg without center support. The PLA PRO printed without it. (Gonna be reprinting all of those as well in the PLA+.) I tested a couple of Benchies - the PLA PRO handled them just fine without any added support. There was no warping or curling. (I do run a MIC6 plate with a PEI coating, so warp is not usually a problem, except on steep overhangs.) Finally, I did a test on heat resistance, and there was no significant gain in the PRO filament. Both straightened segments slumped in a 250°F (120°C) oven, at about the same time. Bottom line - this is by far the best PLA I've tested. The only thing I noticed was a few absolutely miniscule zits here and there, because I haven't dialed it in yet. It's slightly shinier than regular PLA, but the shine can be easily and uniformly knocked back with a damp Magic Eraser. Give it a try and see if you like it as well. It is so easy to print, you'll never go back to the other stuff. Update: Just printed a flat box divider that shows the flex on this stuff - the divider is 2.8 mm thick, so it would be pretty stiff (and might break) when bent this much, if it was printed from plain PLA. The curvature was not imprinted into the divider though - it flattened back out.
...
show more
Reviewed in the United States on May 18, 2016 by Jules Jules
Size: 1.75mm
Color: Yellow
It's been a few days since I ordered and received my filament from Esun I got the yellow filament and the color is great very vibrant and it prints extremely well! I highly recommend Esun. This was my first time printing with it and I can't wait to try other filaments of theirs!
Reviewed in the United States on March 26, 2024 by Sam R
Size: 1.75mm
Color: Cool White
This stuff is great. Is it without compromise? No, but it's still an exceptional filament. There seems to be a misconception that it's significantly stronger than regular PLA, but that's not the case. It's actually slightly-softer, and has a slightly-lower Tg. However, I DO mean slightly... the numbers are negligible considering PLA's typical use for low-heat, decorative purposes. This isn't a secret, the filament comes with a comparison sheet and it clearly shows these numbers. The reason everyone thinks it's so much stronger is because it's MUCH more flexible than regular PLA, which as everyone knows is extremely brittle. The PLA+ prints are much easier to handle or fit into other parts since they won't snap/shatter as soon as you try to bend them slightly. This makes huge difference. As for print-ability... it's simply amazing. I've produced my best-looking prints using this filament. It handles bridges and overhangs very well, it has negligible stringiness, and it shows exceptional detail across all layer heights. I've never seen my 0.1mm prints look so good. Despite what some people say, it's not quite as easy to print as regular PLA. But is it as difficult as ABS to print? Not even close... Your bed does need to be leveled well for it to stick and it required glue stick on heated glass for good adhesion, where I found I can print regular PLA on bare heated glass. I had no problems with warping, but I did need to let the part cool down naturally on the platform before attempting removal. When I first attempted to remove a print warm it did warp slightly after cooling. In summary, it's sort of like PLA (with all it's benefits) inherited the flexible characteristics of ABS at the expense of 10% more print difficulty. It's doesn't have enough strength or heat resistance to replace ABS, but one could easy replace all their PLA with PLA+ and be very happy. It's certainly worth the $3 extra per spool. I have no reason buy regular PLA anymore. In case you're curious, here are my basic settings. Extruder Temp = 215 C Bed Temp = 70 C Speed = 45-60mm/s Cooling Fan = 100% entire print Additions = Pre-extrusion brim enabled, no raft Adhesion = Elmers purple glue stick on glass
...
show more
Reviewed in the United States on December 18, 2016 by Jared Walters
Size: 1.75mm
Color: Orange
Amazing quality, I ordered this in 2021, it worked really well. I took a loooong break from 3d printing and just started back up 3 years later, all my other filaments had all kinds of print issues (not surprising, no knock on them) this was the only brand that printed as good as the day I bought it. Will be sticking with eSUN from now on!
...
show more
Reviewed in the United States on March 11, 2024 by LucidDream
The 4 stars are because this becomes brittle if you leave it unused in the printer for a few days due to it absorbing moisture (I'm in high humidity area). Otherwise it is the perfect every-day use filament. It adheres well to my glass mat and pops off with a little help from the scraper. I don't use brims or rafts with it.
...
show more
Reviewed in the United States on March 19, 2024 by Allen