Braveboy Universal Snow Blower Impeller Modification/Rubber Kit - 3/8" 3-Blade - for Modifies 2-Stage Machine

Features

• Pay attention to: Not Compatible with Ariens Compact 24 snow blower. There is recommended to use a pad on each impeller fin - If you install only 1 pad for the snow blower, it may unbalance the impeller and cause bearing wear.
• (3) 3/8" thick rubber paddle (2"W x 5"L), Made from Styrene Butadiene rubber (SBR rubber), SBR rubber with minimum tensile strength of 725 PSI (5 MPA), Hard rubber with a durometer of 65-75, (3) metal strap with holes - 1 3/8" W x 3 3/4"L, 100% stainless steel materials, 1/16" thick
• (9) bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2" wrench & socket), Hex bolts, Hex lock nuts nylon insert, (3) self-tapping screw (#14 x 1), Sheet metal screw, Hex washer head self drilling
• Product advantages: The product function: Shrinking the gap between the blade and the snow discharge chute and Improving snow throwing efficiency, for Modifies 2-Stage Machine
• Product features: Fender washers hold as good as a metal strap and are easier to work with. Metal straps with pre-made holes dictate where the holes need to be drilled which can cause a problem because many impellers have a cross brace on the underside which means you can't put a bolt there, you'll have to bolt it in the plate's next hole over which might not all line up right. With these washers you can put bolts wherever you need.

Description

1.This "gap" allows snow and slush to slip by the blades and build up around the impeller and in the discharge chute clogging it. This gap also decreases the efficiency of the impeller's ability to propel the snow up the chute resulting in less throwing distance. This problem is well known to people with two-stage snow blowers, and the easy and the quick, inexpensive fix is to modify the impeller blades by adding a strip of reinforced rubber to each one of them to eliminate this gap. It is HIGHLY recommended that you install a Snow Blower Impeller Kit on each blade however, because only modifying some but not all of the blades will cause a harmonic imbalance in the spinning impeller which could easily cause excessive wear on the impeller shaft bearing resulting in very costly repairs! 2.Install this Snow Blower Impeller Kit onto your two-stage snow blower and never fear another snow fall again! 3.Virtually eliminate the “clogged chute” syndrome when moving wet or heavy snow! Dramatically increase the snow throwing distance of your snow blower! 4.If you are not satisfied with our product, feel free to contact us. Our hassle free return policy will ensure you get full refund within 30 days after purchase.

Package Dimensions: 5.39 x 2.56 x 2.56 inches

Item Weight: 1.3 pounds

Manufacturer: Braveboy