ANYCUBIC Photon Mono M7 Resin 3D Printer, 10.1 inch 14K HD Screen with COB LighTurbo 3.0 System, 150mm/h Fast Printing, Intelligent 3D Resin Printer, Build Volume of 8.77''x4.96''x9.05''
Condition: New
Buy Now, Pay Later
As low as
/ mo
Learn more
- – Up to 36-month term if approved
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Only 10 left in stock, order soon!
Arrives
Sunday, Aug 10
Recently Viewed
Model: Photon Mono M7
Features
- Speed Your CreativityAnycubic Photon Mono M7 prints at speeds of up to 150mm/h with high speed resin and 90mm/h with regular 3d resin, resulting in shorter wait times and cost savings
- 10.1 inch 14K Mono LCDPhoton Mono M7 is equipped with a 10.1-inch 14K monochrome screen, with a resolution of 13312 * 5120 and extremely fine XY axis pixels of 16.824.8 microns. It can achieve a minimum forming diameter of 0.15mm, a minimum outlet diameter of 0.3mm, making the model details outstanding
- Anycubic COB LighTurbo 3.0The COB light source system combined with Fresnel lenses and front reflectors can achieve a light angle within 3 and light uniformity is more than 90%. Anycubic LighTurbo 3.0 is also equipped with a light-off compensation algorithm, which ensures that each layer of the model is successfully exposed and removed from the mould, improving the print success rate
- Intelligence Printing FeaturesPhoton Mono M7 resin printer boast 7 intelligent inspections, platform installation status detection, component connection status detection, residue detection, resin detection, failed print detection, release film lifespan management and real-time sensing curves. These can reduce operational errors and increase printing efficiency
- Enough Large Printing Size With a large build voume of 223*126*230mm/8.77x4.96x9.05 inch. Users can easily print larger 3D models or achieve batch printing, greatly improving productivity
Brand: ANYCUBIC
Material: ABS, Aluminum, Polycarbonate
Product Dimensions: 25"D x 25"W x 28"H
Item Weight: 26.5 Pounds
Compatible Devices: Laptop, Personal Computer
Product Dimensions: 25 x 25 x 28 inches
Item Weight: 26.5 pounds
Item model number: Photon Mono M7
Date First Available: March 22, 2024
Manufacturer: ANYCUBIC
Country of Origin: China
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Sunday, Aug 10
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
RIGHT OUT-OF-THE-BOX PRINTING This printer works right out of the box. Period. Unboxing to set up was about 15 minutes. Figuring out which file to print FIRST took more time. SPEED TWO print speeds are pretty much given; standard (with normal resin) and fast (with high-speed resin). The default settings for the FAST print had the test model done in about 17 minutes; this would normally be about a 4 HOUR process with traditional printers. The default standard print of the test model still comes in at an impressive 1 hour. This is due to the usage of the ACF over the old-school FEP and even newer nFEP. Do NOT be alarmed with the “matte” finish! This is also the same type of film used by the M3 Max and works flawlessly! RESIN TYPES The high-speed resin from Anycubic is STINKY. Maybe even a little more so than usual. But, it works GREAT. May have to look at more ventilation or moving the printer to a more open area to reduce the smell. Using Anycubic's Craftsman, which I also use in my Photon Ultra, makes for a much finer detailed print overall, even with slightly increased speeds and layer line thickness. INCLUDED HEATER AND AIR PURIFIER Don’t expect miracles with the purifier. It’s a simple fan system that does its best to circulate the air inside the chamber, but let’s face it; resin is stinky. I used some odor-neutralizer in the carbon filter to reduce the odor. The HEATER works wonderfully! The entire unit is self-contained. The heater and purifier are one piece with its own power cord/source. Rumor has it that this unit WILL be available as a standalone purchase in February. WI-FI A little buggy at the beginning but once it’s detected your network and connected, it works flawlessly. The procedure requires you to download the Anycubic Cloud App to start. This also allows you to monitor and print from your phone. Once the app has detected the printer is configured to the network, then you can add the printer to the home network and the process is seamless. AUTO PLATE LEVELING Plate dynamically levels every single print with this option enforced. This mitigates possible failures due to improper build plate leveling. This is done right out of the box during the initial equipment check. You also have the option to manually level the plate, but that seems to be only for specific errors or situations; most operations will not require this at all. VAT CLEANING MODE Easy to use. Use the Lychee Vat Cleaner Tool to assist. No longer need to empty vat, remove particles. Place LVCT in the corner of the vat, utilize the vat cleaning option (10, 20, or 30 seconds…20 worked fine for me), and peel the cured resin out. All foreign particles and failed pieces are trapped within the cured resin and can be removed all at once. FOREIGN OBJECT DETECTION When the plate is lowered, if it detects even the tiniest foreign object in the vat, it stops and raises. An error is displayed allowing you to investigate as needed. OBJECT FAILURE (ZERO PEEL FORCE) If the printer senses that the print releases with zero force, it stops the build process, allowing you to investigate. This saves a LOT of time, frustration, and most importantly, resin. Rather than having to wait until the plate reaches a certain height to visually inspect the piece, the printer senses the release forces. When those are zero, it throws an error, stopping the print, raising the plate, and allowing you to visually inspect the piece. You can resume or cancel the print at that point, depending on your situation. INTELLIGENT RELEASE So, I had no idea about this when I first read about it, but today’s print testing made me aware of this feature. Intelligent release, according to Anycubic, calculates the forces of the build plate lifting and retracting…and, if possible, ADUSTS THE HEIGHT DYNAMICALLY. How I found this out was from a print with an initial build time of 8.5 hours. I accidentally used the Default Resin profile, even though I had High Speed resin in the vat. Oh Well…no problem, I’ll be home all day to monitor things. But as time went by, and when I would turn to look at the print progress (also keeping an eye for failures and other errors that may pop up) I noticed the progress was a lot faster than anticipated. End result? The 8.5 hour estimated build (from Photon Workshop) finished in 5 hours and 53 minutes. Without me adjusting anything. The printer figured I was using high speed resin, did some auto adjustments, and increased the variables…and my print was done 2.5 hours faster than estimated. PRINT DETAILS So, let’s really face it; humans really can’t detect the difference down to 14K resolution. So folks who are either very excited for this OR naysaying and stating that it isn’t TRULY 14K…well, settle down. Most resin printers being sold today are in the 8K and above range, with the Mighty 8K offering that initial 12K experience as an upgrade, and then Anycubic following with the M5S and now the M5S Pro. FACT is…the results are spectacular as you would imagine. I was impressed with my little Anycubic Photon Ultra back in the day (my first resin printer and STILL going strong and impresses me every single time). Then moving into the Mighty 8K, I noticed some subtle changes in quality. Then on to the M3 Max and was impressed with how well it compared with the Mighty 8K…and the build size was incredible. So, having a pretty sizable mid-range build volume here at 14K is equally impressive. Now, will YOU see the difference between what you may have been using and what the M5S Pro offers? Maybe. But honestly, I couldn’t. NOR could I notice that “softness” that others are talking about due to the matte ACP film of the vat. The M3 Max has the same film and I never noticed a change in quality over my Mighty 8K. Now, that doesn’t mean that I’ve switched some of my extra on-the-fly vats for all of my printers over to nFEP. I have to admit, I loved that little “upgrade” from the traditional FEP and the slight increase in speeds I achieved were also a plus. But, I’ve also been experimenting with the ACF on my Photon Ultra and now, with the M3 Max and the new M5S Pro having this ACF installed, again…impressed with the speed increase and not affected by this so-called “softness” of details others are talking about. To me, EVEN IF there were some loss of sharpness, I would much rather have the peace of mind on my other printer’s building process that comes with the ACF installed than be nit-picky over something that most people really can’t detect with the naked eye. ISSUES/OBSERVATIONS One of the FIRST things I noticed off my successful first print was how hard it was to remove the supports from the test print. You can notice in the first image (Test Print) the marks and left over material along the bottom. This thing was BAKED to the build plate and the supports were, in turn, BAKED to the model itself. Trial and error led me to destroying several other test prints from excessive exposure and baking the supports or build itself to the build plate. Thus, looking at not only modifying exposure settings but also support settings.
...
show more
Reviewed in the United States on January 31, 2024 by psychoskin67 psychoskin67
Model: Photon Mono M7 Max
Read the reviews. "Wow" "Excelente" "Muy Bueno". That about sums it up. This is truly an exceptional machine and I'm just fully tapping into its full potential. I've had mine a few months now. It was a rough start. The LCD screen was out in one section on the start up test, though this was likely shipping damage. Anycubic was immediately responsive and within 2 emails I had a new LCD replacement kit in a few days. The swap was very easy and I was off and running. I'll note that I've had an Anycubic Photon M3 max for about 3 years. Possibly the best one ever made. I've used it for small scale production of some finished parts, and it has been bulletproof and paid for itself many times over. Just before buying this one, I upgraded it to ACF film, jacked up the print speeds and it was fully next level and I was smitten. Yet even from that point of view, the M7 has totally blown my mind. It prints ridiculously fast. You can't believe it when you see it. Yet it produces mind blowing accuracy. You can only see layer lines on flat surfaces. Anything with texture blends them out and it looks as good as molded. Your prints actually shine. Compared to even my M3 Max on steroids, it effortlessly outperforms it. With the equally amazing Pro2 resin, 12 hour prints barely take 5 now. And they're just gorgeous. Also the build plate is massive. So you can fit even more prints on a plate than even the M3 max. Altogether this slashes time tremendously. So when prints are done there's a little hangy thing for the build plate, and a button in the software that lets you raise the print bed 50mm in one tap. This lets you hang the plate under the platform frame at a diagonal so excess resin drips away quickly. The plate goes on and off easily and the removal process is the same as any resin printer's. BUT THEN...the star of the show. The resin sucker. It has a resin sucker! You go into the post print 'cleanup' menu and tap 'retrieve'. A little tube and sensor drop down and suck the resin out of the vat into the autofill bottle. Its not crazy fast and you have to help steer the resin towards it with a spatula a bit, but it will eventually suck the resin vat almost completely dry. The cleanup from there is negligible. Its amazing. I dump the resin from my M3 in there too. 95% hands free cleanup. The flip down lid is a great touch too. The cover for my M3 Max is huge and I never have anywhere to put it when I open it. This one flips pretty easy and stays up when you want it to. It also drowns out pretty much all of the motor noise. That said the internal exhaust fans on this printer are definitely loud. Overall its louder than my M3. Not offensive, and not as loud as an FDM printer, but definitely noticeable. As far as software interface goes, I admit to having my own weird preferences about things, but overall the software is pretty solid. I never had any issue intuitively finding the features or settings I wanted, and most everything is explained. Same with the Workshop software. I was pretty used to the M3s Workshop and didn't feel great about the new version at first, but its actually much better once you get into it. Slightly less user friendly (to me), but far more capable. Once you get the hang of it its powerful. I really just have almost no complaints about this printer. Besides that the wash station is kinda junk, but that's a different review. I can't yet speak to its durability, but the durability of my last one paid for this one, so I'm optimistic. For the price, this machine is just so capable and powerful it reminds you you live in epic times! Get this thing and get ready for some BIG fun.
...
show more
Reviewed in the United States on May 19, 2025 by Marla