Anycubic Kobra S1 Combo Multicolor 3D Printer with Anycubic ACE PRO, 4 Multicolor, Drying and Printing at the Same Time, 600mm/s Fast Speed with 320℃ Hotend, Built-in Camera 44dB Quiet 250*250*250mm
Condition: New
Buy Now, Pay Later
As low as
/ mo
Learn more
- – Up to 36-month term if approved
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
Extended holiday returns
Returnable until Jan 31, 2026 Learn more
Returnable until Jan 31, 2026 Learn more
This item's return window has been extended for the holiday season: Returnable until Jan 31, 2026
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Tuesday, Dec 23
Model: Anycubic Kobra S1 Combo
Features
- Multicolor Printing Up to 8 ColorsThe Anycubic Kobra S1 Combo can achieve 4-color printing. With 2 Anycubic Ace Pros are combined, you can then unleash max 8-color printing to bring you even more unimaginable possibilities
- Ace Pro More Than Just Active DryingActive dryingintelligent mult-filament drying and anti-entanglement design improve the success of printing. Dual PTC heating module + 360 hot air circulation drying technology ensures even heating of the filaments, keeping them in optimal printing condition at all times to create the perfect model
- 600mm/s Speed and 320C HotendWith fully enclosed coreXY construction and 320C high temperature hotend, the Anycubic Kobra S1 Combo can reach 600mm/s ultra faster speed, achieving a step ahead. Its hotbed can consistently maintain a maximum temperature of 120C, enabling effortless printing of filaments such as ABS, ASA, and other materials
- Intelligent System and Ultra QuietThe Built-in Camera can achieve AI MonitoringBelt Tension Monitoring and Seamless Operation. Ensures precision by continuously checking belt status to prevent disruptions and improve success rate
- Anycubic Intelligent EcosystemAnycubic Slicer Next is equipped with different specifications and filaments parameter sets. And Anycubic App supports remote control and elapse-time recording. Makeronline offers many free model resources
Brand: ANYCUBIC
Material: Stainless Steel
Color: white
Product Dimensions: 20"D x 20"W x 25"H
Item Weight: 1 Kilograms
Product Dimensions: 20 x 20 x 25 inches
Item Weight: 2.2 pounds
Item model number: Anycubic Kobra S1 Combo
Date First Available: December 17, 2024
Manufacturer: ANYCUBIC
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Tuesday, Dec 23
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Model: Anycubic Kobra S1 Combo
The value for money is off the charts on this printer. We've only had it for 4 days and the poor thing has barely stopped printing. We had so much trouble in the past with our Ender 3 series printer that we had almost given up on 3D printing. Constantly trying to level the bed, adhesion problems, failure after failure on prints. Not this thing. It's amazing! The auto bed leveling actually does what it says. We haven't had to make any manual adjustments of any kind. Everything went together easily, and all but a couple of prints have gone flawlessly. The only two the messed up were tiny little buttons that were really poor designs. Adding a support fixed them no problem and they printed fine. The only thing that was a little confusing was the difference bettween wireless and "LAN" printing. If you want to use the software on your PC and control the printer from there - you will need to enable "LAN Printing" even though it's using wifi. If you want to just print from the marketplace using your phone or what have you, then you have to turn off LAN mode and log back in using the qr code with your phone. It sounds way worse than it is. Once we figured it out it is actually fantastic. I can't recommend this enough. It is super quiet, super easy to use, and ridiculously fast (you can choose slow, normal, and sport print speeds/qualities). I'm sure there are cons to be had, but we're super happy with it right now and I can't think of any yet. I'll update when I find them :)
...
show more
Reviewed in the United States on October 29, 2025 by John McHaffie
Model: Anycubic Kobra S1 Combo
Been printing for months with zero issues. The feeder csn be a pain and its a pain to fix any issues that clme up so expect to need some technical skill but its working perfect. Bed leveling is nice and the accuracy has been great.
Reviewed in the United States on December 5, 2025 by Joseph B.
Model: Anycubic Kobra S1 Combo
At first this thing was awesome and I honestly can see how if it maintains it's functionality long after the 5th or 6th print than it's going to be well worth the money but the unit I was sent started kicking parts off the bed. Then it started globbing up and pushed the nozzle into the bed and engraved a flexi rex head into the printer before it sent me a notification about the issue. No biggie new build plate new hotend without this plastic throat that causes the issue. Seriously. Look that up before you buy one of these. Anyway I get it all back together and find out the bed, which is just a chunk of plastic and some very thin metal pads has been warped by this extruder/hotend/nozzle fiasco. Which is now globbing up no matter what I do. Check forums, do bed level, test, print and it sticks to some spots before it globs up and drags plastic everywhere. FUN. so I get ahold of anycubic support and they suggest sending me another flimsy plastic bed carriage and a new bed assembly made of the same paper thin materials and I ask why I should have to fix a product under warranty? They continue to offer me A whopping 12 USD worth of PLA to "sweeten" the deal or I could send the printer back to them but I wouldn't be able to return the next printer should it go wrong. Also if I returned the printer they would take my old printer first and upon receipt would send another printer which to me sounds like; yeah we can refurbish that one and send you another refurbished or potentially the same one refurbished....then you cant send it back WHEN it inevitably has the bed warp. Nah. NAAAAAAHHHHH! So the options they gave where to do precision work on a brand new $600 piece of equipment I just paid for less than a week ago and the prize would be this KG of PLA to waste while I test the thing as compensation for what could turn out to be endless hours of work resulting in my return window closing before I got fed up (seriously watch these guys on YouTube trying to resolve this crap) NAAAAAAAH, you can have it back anycubic. I can see your sneaky crap a mile away you cheeky sods. I'll give it another go since this isn't for me really but this is go #3. the first printer I received was damaged beyond repair during shipping and had to be returned, the second or current printer went haywire and started blobbing instead of printing. So I'm hoping the third time's the charm for this cause if not this reviews gonna get even worse for you anycubic. How's that for asking me about my review!? You like it more now!? Got a 3rd printer shipped and after jumping in front of all the problems that come with ordering one of these I've finally managed to get a working printer that has been pumping out plastic junk like a champ. I do have issues with the exotic bedplates adhering on this printer but it seems to plant everything to the stock plate they send. After going through a bunch of BS I finally have a working printer. Just make sure you don't remote print from your phone unless you see it has KS1 even then I'd check the slicer first. I've done a lot of research and it seems if you send files from your phone to the printer it gets the settings from that file which may or may not have been created for your printer resulting in incorrect settings being applied automatically by the system resulting in failures that may or may not render the whole thing useless. It's also worth mentioning the first layer SUCKS on this printer. Always looks like crap. I've never seen a textured bed produce visible lines on the bed layer before. Still makes stuff. Just not stuff I'd sell. I've printed up all sorts of Halloween junk and dummy 13s for al my co workers to strike poses with this one.
...
show more
Reviewed in the United States on September 25, 2025 by Travis Wright
Model: Anycubic Kobra S1 Combo
Upgraded from an Anet A8 (2017) to an ender 3 (2019). I have to say the Kobra S1 is amazing! Great value! I do the auto level after like 5 prints (or 1 big one) to be safe. Quick and easy to setup! Literally print ready out of the box! Only used PLA, the only adhesion issues which were not many (like 3) were either because I didn’t clean the bed good or because the first layer was too fast, but that’s it! I use 70% isopropyl alcohol and a microfiber cloth to clean the bed every 2 to 3 prints. Tallest thing (which was the max height) I printed was an attachment for a shop vac, also printed 6 (multi color) coasters (at the same time) for my Etsy shop. Latest update causes the camera to lag in the Anycubic app and slicer but really no big deal. They will get a fix out soon I’m sure. I also heard (from Reddit) that they will be open sourcing the firmware (I think this month) but we will have to see.
...
show more
Reviewed in the United States on October 7, 2025 by Travis
Model: Anycubic Kobra S1 Combo
The media could not be loaded. This is a great 3D printer setup that was easy to put together, and the included QR codes link to helpful videos that walk you through the assembly. The software is straightforward and user-friendly, and print quality is very good most of the time. I’ve had a few spaghetti incidents here and there, but overall it handles tools, jigs, brackets, and other functional prints beautifully. It’s capable of doing miniatures, but the layer lines are noticeable enough that I wouldn’t recommend it for anything beyond personal hobby use. The multicolor function is a nice touch, and the built-in camera and quiet operation make it convenient for home use. For everything other than high-detail miniatures, this is an outstanding machine.
...
show more
Reviewed in the United States on August 15, 2025 by Dan Pickett Dan Pickett