Anycubic Kobra 2 3D Printer, 6X Faster Firmware Upgrades 300mm/s Max Print Speed LeviQ 2.0 Auto Leveling with Dual-Gear Extrusion System Efficient Precise Delivery Fully Open Source 8.7"x8.7"x9.84"
Condition: New
Checking for product changes
Notify me when this product is back in stock
Buy Now, Pay Later
As low as
$50.00
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Unavailable
Recently Viewed
Size: Anycubic Kobra 2
Features
- 90% Pre-installed Make It Easy Anycubic Kobra Neo is a 90% Pre-installed 3D Printer, which make it possible to set up within 10 minutes. It can print perfectly right out of the box and this would make any beginner to be a great printer enthusiast, which is more suitable for beginners than other DIY 3D Printers.
- Direct Drive Extruder Make It Precise Control The Direct Drive Extruder realizes smooth feeding and discharging of flaments and compatible with more flexible filament such as TPU/PLA/ABS/PETG. It is more lighter, features less inertia and more precise printing, can restore the form of the model to the greatest extent.
- PEI Spring Steel Platform Make It Easy Removal & Cost Saving Compared with other FDM 3d printers, double-sided magnetic PEI spring steel platform is more durable and lasts longer, saving a lot of maintenance costs. You can remove the model easily.
- 25-Point Auto Leveling Make It Smart Simple operation brings precise detection and fast leveling, helps you from the tedious manual leveling greatly.
- 34.4% Larger Creation Dimension Make It Large Compared to the last generation Anycubic Mega S, the printing volume of Anycubic Kobra Neo has increased by 34.4% to reach 12.1 liters. The printing dimension is 250x 220x 220mm, equivalent to the size of a standard Size 5 soccer ball
- More Function 1Make It Fast: Anycubic Kobra Neo 3d prints at a recommended typical speed of 50-60mm/s and reaches 100mm/s at its highest, which will save much time; 2Make It Smart: The standard power outage resuming sensor and the optional filament run-out sensor reduces filament waste and save time by avoiding the printing failure caused by the power outage and lack of filament.
- Customer Services ANYCUBIC FDM 3d printers come with one-year warranty(The print head with 3 months, the heated bed with 6 months) and lifetime technical support. If you have any question on Anycubic Kobra Neo 3d printer, just click "Ask a question" through our page, we will fast respond within 24 hours
Brand: ANYCUBIC
Material: Aluminum
Color: Black
Product Dimensions: 20.07"D x 19.69"W x 10.63"H
Item Weight: 8.4 Kilograms
Product Dimensions : 19.13 x 19.13 x 16.93 inches; 18.52 Pounds
Item model number : BR-KB005
Date First Available : March 22, 2023
Manufacturer : ANYCUBIC
Best Sellers Rank: #13,987 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #20 in 3D Printers
#20 in 3D Printers:
Customer Reviews: 4.2 4.2 out of 5 stars 966 ratings
Frequently asked questions
This product is currently out of stock. Please check back later for shipping info.
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Size: Anycubic Kobra 2 Neo
This is my 6th FDM printer in the past few 5 or 6 years. I wanted something to print things while my CR-10 is printing big stuff, so bed size was not as important as price and speed. I will no longer use a printer that does not have: 1. Direct drive extruder 2. Magnetic build plate Well, the Neo 2 has both. Standard. Assembly was so easy. Half of the steps of an Ender-3 and only 7 bolts for the entire thing because everything was pre-assembled. An 8 year old with lego experience could assemble this guy in 20 minutes or less. Note - the wire harness has one plug that is not used, the instructions conveniently leave that out of the manual (they don't tell you to put it anywhere, its just ... there). The menu on the control module leave a bit to be desired, as it is entirely ison-based. Still, responsive and adequate. The prints are fast and the quality is awesome. Tested against my CR-10 it prints about 2-3x factor set at 150 mm/sec. Self leveling means I can set it and forget it - I don't have to play the "watch to see if I need to tweak X-axis by 0.99mm or not" game. It is quiet. Although not as quiet as an Ender with the quiet motherboard, its between that and an unmodified Ender - so thats nice. It does everything I wanted it to do, at a sub $200 pricepoint. It probably lacks the support community the Ender-3 has garnered and it likely will not have as many modifications available, with a magentic build plate, self-leveling, and direct drive extruder I cant think of anything I'd add right away, anyhow.
...
show more
Reviewed in the United States on March 7, 2024 by Will B.
Size: Anycubic Kobra 2
So I got this for my husband for valentines day, so I'll let him write the review: This printer is a FANTASTIC first time user printer. The print quality I'd give a 4/5 instead of a 5/5 simply because the extruder struggles to maintain a smooth surface even with a lower layer height. It's nothing that a little sanding doesn't fix, but it's something to mention. Here are my thoughts on it: It's extremely easy to use, just follow the instructions for setup. It struggles with low quality prints, so make sure the models you get are of decent quality. If you find that you're getting gaps or that it's peeling up from the plate with PLA, change the filament settings in the anycubic software (separate download) to increase the bed temperature to 60C degrees instead of 40C degrees, and slow the print speed down from 150mm/s to 100mm/s. It also prints more consistently at that speed, I've noticed. It doesn't take up much space at all, but make sure that you place it on a VERY sturdy desk/tabletop. My desk wobbles ever so slightly and the kinetic motion of the print head, especially in short strokes, makes it wobble a bit, which could affect your prints. This unit has tons of adjustments and even modifications and addons. My unit came without a PEI plate (The bed plate), but customer service promptly mailed me one, so that's a +1 point for customer service. They also have a dedicated tech support portal if you have any other issues. For a sub $250 printer, this is an EXCELLENT value if you're just getting into 3D printing. I'm looking forward to making some cool stuff with it!
...
show more
Reviewed in the United States on February 2, 2024 by Mia
Size: Anycubic Kobra 2 Neo
I was quite excited to receive this printer and this company did not disappoint! It's simple to setup and absolutely mesmerizing watching it work. The whole point of a printer is to press print and walk away but I can't help but to sit and watch! Absolutely love it!
Reviewed in the United States on August 29, 2024 by Rusty Shackleford
Size: Anycubic Kobra 2 Pro
Update: From 3 stars to 1 star The magnetic bed cover broke after just a few uses. I am very disappointed in this purchase. If you want something that is *okay* and will save you money, I guess, go with this. Especially if you plan to print primarily in PLA. I primarily print in ABS and have been using 3D printers for 2 years going on 3. This printer is tricky to work with for ABS. Anycubic will tell you all these awesome filaments their machines work with but leave out how difficult it is for some of them to print it. If you're going to or want to print a whole lot of ABS, go with the i3 MEGA S instead. This printer is printing small test prints pretty well, but once you start putting bigger files that have more curves to them, you run into big problems. BAD INSTRUCTIONS! - While it is extremely easy to set up in less than 30 minutes, the instructions are incomplete to where to put a couple of the wires. JUNK WIRES! - Just putting the axis at home made two of the wires pop off. Consider upgrading pieces or use a strong glue to hold them in place if you're brave. Also, the box it came in? Had one short measly piece of tape across the top and my package was delivered opened because the rain got under the tape and there wasn't enough tape to really stick down to the cardboard to begin with. There was already blue PLA in my nozzle, I am sure it was just to test the machine and make sure it runs... however, it would have been smart to clean it out before sending to a customer. We don't all like PLA. The good: the print resume feature, the easy leveling, slightly bigger build surface than other machines in it's price range, you can change nozzle temp while it's heating up(this is especially helpful if it won't keep a consistent temperature, you can actually slice your file to be a higher temp then change the temp on the printer when it gets to the one you want, this way you aren't waiting more than 5 min for it to heat up and be ready.) The bad: the menu knob(would rather the touch screen, the knob isn't always feasible when you need to make quick selections), the very simple-minded menu, flimsy bowden tube, not doing well with ABS, noisy, not printing files from certain slicers, packed terribly, some prints that print immaculately on other Anycubic printers look like a hot mess on this one, incomplete instructions, bad/loose/cheap wires. If you are buying this to use for a business and are a beginner, I will tell you right now, it's not as easy as other reviewers have made it seem. I am only one filament type in. Maybe the printer doesn't like this one? I will update if anything starts to get better.... looking like a possible return already, sadly. Probably going to get an Ender3 or Prusa Printer next. GOOD LUCK TO ALL OF YOU WHO FELL FOR THE REVIEWS LIKE I DID! I don't know what kind of magic the people in the reviews are working but it must be good! lol
...
show more
Reviewed in the United States on June 20, 2021 by Emmi Ellami Emmi Ellami