Search  for anything...
3Dman

3DMAN 3D Touch Auto Bed Leveling Sensor for Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series and Other 3D Printers

  • Based on 200 reviews
Condition: New
Checking for the best price...
$14.99 Why this price?
Save $13.00 was $27.99

Buy Now, Pay Later

As low as $3 / mo
  • – 4-month term
  • – No impact on credit to apply
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout.

Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

FREE 30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: 14 left in stock
Fulfilled by Amazon
Arrives Monday, Jun 1
Order within 14 hours and 12 seconds
Available payment plans shown during checkout
Protection Plan Protect Your Purchase
Checking for protection plans...

Recently Viewed

Color: 3D Touch


Features

  • The 3D Touch auto leveling sensor is a device that uses the Hall defect to achieve leveling .The position of the point can be obtained by touching the point on the heated bed ,and then compensated by adjusting the Z-AXIS height during printing ,Printing can also be achieved even though the platform is not flat .
  • Features simple, smart and precise. It could work with nearly any kind of bed materials, such as glasses, woods, metals and so on. The position of the point can be obtained by touching the point on the heated bed, and then compensated by adjusting the z-axis height during printing.
  • The main functions and controls of 3D touch are the same as most auto bed leveling sensors, which consists of a RC servo and a micro switch,thus,3D printer touch can be used on almost every 3D printer control board.
  • NOTE: Pulling/pushing hardly on the push-pin may damage Touch sensor and make it less accurate. Any problem when you receive the order, CONTACT US FIRST please!
  • By using progressively designed solenoid and hall sensor, it can integrate high precision in such a simple structure.To make it more user-friendly and to bring you more enjoyable printing experience.

Description

Specifications: Current:15mA Max current (peak): 300mA Voltage: 5V Shell material: PC Shell color: White translucent Cable length : Short: 200mm Long: 1000mm Wire: 3pin: Green :-GND RED:+5V Orange: Signal cable 2pin: Black:-GND White :Z min Work with LCD12864 and MKS Robin SGen_L Gen_L: Work with MKS TFT35 and Robin SGen_L Gen_L: Replacement needle: Used on CR-10 / Ender-3 3D printer: Instructions 1.After receiving the module, do not install the module to the printer. First connect the signal wires of the module to the motherboard one by one. After power on, there will be a needle suction and push needle action, which is normal. 2.When the main board and the module are powered on, do not plug and unplug the cables casually. Please be sure to connect when the power is off. 3.After the firmware setting is completed, it is still uncertain whether the setting is correct. You can manually trigger the module in advance to check whether the machine is operating normally. If it is abnormal, please stop it in time and recheck the firmware settings. Prevent the probe from hitting the platform, causing damage to the module. 4.Due to there are too many motherboard manufacturers and models, advise customers to consult the motherboard manufacturer for specific settings. To prevent incorrect settings due to different motherboards. Package Included: 3D Touch Auto Leveling Sensor × 1

Color: 3D Touch


Brand: 3Dman


Voltage: 5 Volts


Material: Polycarbonate (PC)


Item Weight: 0.03 Kilograms


Brand Name: 3Dman


UPC: 791738580352


Manufacturer: 3DMAN


Part Number: 3Dtouch-2.0


Unit Count: 1.0 Count


Voltage: 5 Volts


Display Type: LCD or LED or TFT


Operating Temperature: 160 Degrees Celsius


Smart Home Compatibility: Not Smart Home Compatible


Color: 3D Touch


Material Type: Polycarbonate (PC)


Item Weight: 0.03 Kilograms


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Monday, Jun 1

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Plug and play. Works well.
Color: 3D Touch
My Sovol Sv04 printer suddenly would not lower the gantry, the z value was way off. I figured that the bed level sensor must show being already down on the bed when it wasn't. There was no obvious damage to the sensor and following a recommendation on Reddit, I bought this sensor at this insane low price. The connector cables come with it but I didn't need them since the existing cable connector fits. There were also screws and cramps in the bag which I did not need to use. This is really plug and play. Make sure you route all the cables neatly after installation. I did a bed leveling and all is good now. BTW, the open part goes towards the back of the printer. ... show more
Reviewed in the United States on March 21, 2026 by Adil Yitiz
    • A little confusing at first, but works wonders
Color: 3D Touch
I use klipper with mainsail, and the process if wiring it, you are on your own, but after you do that, it works ALMOST perfectly. the normal bltouch commands don't work, but the only important one, G28, does. Make sure your wiring is good and you wont have issues. Great product
Reviewed in the United States on September 19, 2025 by nic
    • low quality z-probe. can't trust it to stay "parked" during a print.
Color: 3D Touch
I considered myself pretty tech savvy. This Z probe is barely passable. The included wiring and connectors is a nice touch. The probe itself has some issues. It will not tolerate any EMF in the system. My extruder wiring was making it power cycle. After running a shielded and grounded cable from the main board to this probe, that appeared to take care of the power cycling. Any sudden movement in the X or Y axis will make it drop the probe tip. And on a faster printer, that is often. There's no lights indicating any error has occurred. I've tried adjusting the stop screw. I can't find anything mechanically wrong with the unit. I'm currently holding the probe tip in with a rubber band until I can get a better Z-probe. I really wanted to give this one a chance. I don't want to return this one as it works well enough to keep the printer going. I don't know if this is a defective unit or they're all this poor. ... show more
Reviewed in the United States on August 4, 2025 by dan robbins
    • Absolutely no issues with this product.
Color: 3D Touch
I run a small 3d print shop for some special needs people, you know autistic, and folks that have had severe TBI. I have more then a couple machines and keeping up with them can be a pain in the butt. I have a couple machines with the crtouch system installed and those machines rarely give me issues. This is due to the auto leveling. I make absolutely no money at this so whatever parts are required to keep things running comes directly out of my pocket. I have milled about on whether or not to purchase these for a while. I found these and saw the price also that the seller would accept returns should it not function. I thought to myself mess on it I will get some and try them out. I puchased 8 of them, that isn't as many as I would have liked but it is as many as I could afford at the time. Now for the information you are all waiting for. These work exactly as advertised thus far admittedly I have not gotten all of them installed as of yet but the 4 I have installed have given me no issue whatsoever at this point. I have them installed on numerous different boards all of which would be for an ender 3. I have had issue finding a good firmware for them when using the creality 4.2.7 board but that has nothing to do with the product or the seller. As far as ease of installation it really couldn't be simpler my autistic son had absolutely no issue installing one so for those that say they are tech savy and couldn't install it incredibly easily perhaps you should reevaluate that thought. For accurracy the device is as accurate as your firmware will allow I have found no large deviation in its measurements. For the durability of the device time will tell I have only had them for a short while but there should be no doubt that these guys will definitely put them through the paces. As for length of time for prints they print things that can take as little as 30min. up to 6 days so we will definitely know how well they hold up soon enough. We will be adding one of them to a longer LK5 Pro as soon as I either find firmware for that or compile some myself. Finding a suitable mount was not difficult you can print one easily I highly recommend printing it at 80+% infill and you should have no issue even if you use standard PLA. The only complaint I have at all and it really isnt much of a complaint is that the cable could use to be a bit longer. All in all it is a functional design that works nothing special. I am pleased with this purchase, and should I need another bed probe I will more than likely get more. ... show more
Reviewed in the United States on October 7, 2025 by gebann c Campbell
    • Works great
Color: 3D Touch
Quality was good. It was compatible for my smaller 3-D printer seems to be pretty accurate and easy to use.
Reviewed in the United States on January 12, 2026 by Rachel
    • Amazing bit of kit
Color: 3D Touch
Been using this unit for quite a while now works great with a stock ender 3 control unit. I now upgraded the ender 3 with a raspberry pi and it works phenomenal Yes it has a plastic tip mine hasn't worn out then again I don't print that much but I do have long prints to take up to 7 to 8 hours sometimes more. ... show more
Reviewed in the United States on August 8, 2025 by Aisle 12 crop_duster
    • Title is required
Color: 3D Touch
Works just as well as a BL Touch
Reviewed in the United States on December 15, 2025 by Brayden

Can't find a product?

Find it on Amazon first, then paste the link below.
Checking for best price...