Buy Now, Pay Later
As low as
$9
/ mo
Learn more
- – 4-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Zip, Apple Pay, and Google Pay. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
20 left in stock
Arrives
Sunday, Aug 30
Recently Viewed
Size: 1-Medium with LED
Features
- Enhanced Illumination For Your Printing AreaImprove your workspace visibility with our innovative built-in LED light strip. It will illuminate your printing process, allowing you to monitor it more effectively. By quickly identifying potential issues such as filament jams, layer adhesion problems, or misalignments, you can address them promptly even in low-light conditions.
- Improve Print Quality with Constant TemperatureProvides a stable and controlled environment for your prints, maintaining a consistent temperature during printing ensures that you produce high-quality prints while avoiding print failures and material wastage. Constant temperature reduces the risk of material clogs and jams, enhancing your printing speed and efficiency.
- Dustproof and Fireproof, Safe to UseProtect your 3D printer and reduce the risk of accidents with fire-resistant materials and a sturdy structure. Avoid dust particles from entering and negatively impacting print quality, ensuring stable and perfect results every time. Effectively prevent accidental touches from children or pets.
- Fast Installation and Long-term Use5 minutes easy installation, quick start and easily disassembled for moving or replacing. Its robust construction ensures stability during operation, minimizing vibrations that could compromise print precision, and can support your long-term use and is not a disposable product.
- Isolate Noise and Enjoy Creation Quietly An enclosed 3D printer cover with all six sides effectively blocks the transmission of printing noise, effectively reduce noise and enjoy the silent printing process,
- Wide Compatibility & Spacious DesignWith a spacious 21.7" W 25.6" D 30.7" H (550 650 780 mm) interior, this 3D printer enclosure fits a wide range of printers, including Creality Ender 3 V3 SE/KE, Ender 3 V2/Neo/S1, ELEGOO Neptune 3/4 Pro, PRUSA MK3S, AnkerMake M5/M5C and more. Please check your printer dimensions before purchase.
Description
Does the package include a fan ventilation kit? An opening for connecting the ventilation kit is provided on the right side of all YOOPAI's enclosure. You can order our ventilation kit separately for installation. Is the LED light included in the package? Yes, there is one LED light included in the packaging.Free replacement supports if there are any quality issues. Is it only compatible with the printer models listed in the image? You can measure the length, width, and height of your printer and compare them to our enclosure's dimensions. If it's smaller than ours, it's compatible. Note: Printers with a front door, such as the P1S, are not recommended. Why choose YOOPAI Enclosure? High cost-performance allows you to get more features such as lighting and pre-installed ventilation, giving you a more comfortable user experience. Does it fit the Bambu A1 printer? The size is compatible. YOOPAI originated from a group of craft enthusiasts who were early adopters of 3D printing technology and got to know each other through the Internet. With a deep passion for innovation, we have dedicated years to exploring and mastering this cutting-edge technology together. As seasoned makers, we have a keen eye for identifying products that really meet the needs. Through extensive use and evaluation of various facilities, we have gained expert knowledge in hardware procurement. During this process, we were committed to sharing our insights and offering the most practical products to the maker community. Today, YOOPAI has evolved into a professional team of over 100 members specializing in 3D printing. Each year, we deliver over 1 million units of high-quality products to the market. We take pride in what we do, as we are driven by our love for technology and our dedication to providing value to our customers.
Brand: YOOPAI
Material: Flame-Retardant Fabric
Color: Black
Product Dimensions: 25.6"D x 21.6"W x 28.7"H
Item Weight: 1.9 kg
Product Dimensions: 25.6 x 21.6 x 28.7 inches
Item Weight: 4.18 pounds
Item model number: Enclosure-M
Date First Available: August 7, 2023
Manufacturer: YOOPAI
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Sunday, Aug 30
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- Zip Pay in 4
- Financing through Apple Pay
- Financing through Google Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Size: 1-Medium with LED
I was skeptical of buying an enclosure for my Ender 3 V2. I have my printer in the basement and was open to the idea of having an enclosure to keep the draft down and temperature controlled. It was easy to put up, is sturdy and made with think fabric that is good material. I had it up in less than 20 minutes. My printer fits perfectly in the enclosure and the quality of my prints has increased significantly. Stringing has stopped and the edges of my prints are crisp. I would recommend this to anyone that wants to increase the quality of their prints. I don’t have the ventilation add on, but it is nice to know when I start printing ABS and other materials that I will be able to keep fumes contained and out of my house. The light is bright and works well to light up the area, but I will probably buy another to keep the quality of my webcam. Overall 5 star product!
...
show more
Reviewed in the United States on May 10, 2026 by Nathan
Size: 1-Medium with LED
I needed to reliably print a few parts for a Voron 2.4 build, which requires ABS. I have an old Prusa I3 clone in the garage which I've occasionally used for this since there are usually no drafts, and I stink up the garage instead of the house. During the hot summer months, when the garage is often pushing 90F, I'm normally able to get away with printing ABS well with an open frame. Come fall and winter, warping becomes an issue. Plus, the family was getting tired of the "Don't open the garage door!" exclamations from me when I was printing ABS. Picked this up to provide a quick enclosure, with hopes it would allow reliable ABS printing (and allow the garage door to be opened while doing so). This has worked SHOCKINGLY well. Since my printer has been in this enclosure, I've been able to print about 10 parts, a few of which are highly prone to warping (small contact space on the bed). All of them have printed successfully and beautifully. Of course, the blast of "ABS stink" when you unzip it to remove the print is fun. "Just the facts, ma'am": Pros: - Super easy to assemble, although it's bigger than you think so have some space. - Canvas with the shiny fireproof lining is thick and well sewed. It didn't feel "cheap" at all. There is quality here. - I find the LED to be plenty of illumination, especially since it reflects off the shiny material inside. My print camera finds it to be plenty of light, too. - A good number of round bungs to route cables through, that seem to be in the right place. Two on the back and one on the right-hand side towards the rear. - Has a rather large flap on the left, which I'm not using. Closes with velcro. - I like that measurements were listed clearly, so I could ensure it would fit and get the correct size. Medium worked for my Prusa I3 clone (about the size of an Ender 3, I guess) with room to spare. - I can print ABS consistently, and get strong, clean prints! Cons: - Bungs are a little on the tight side. Had to really push the power cable through and thought I was going to tear the fabric. I did not, which is also a pro I guess, that canvas is pretty tough! - The clear viewing window has a lot of folds in it, so it can be a little difficult to see print details. Overall, I think this is a fantastic value if you're looking for an inexpensive and plug-and-play enclosure for your 3D printer.
...
show more
Reviewed in the United States on November 30, 2024 by Mark M.
Size: 1-Medium with LED
This is great and fits my Anet A8 with room to spare. You cannot go wrong for the price. It keeps the print warmer with no drafts and knocks the noise down a little. The LED strip could be brighter and does not include a USB power adapter but it's fine for this price. Easy to build and even includes latex gloves to handle the fiberglass rods. As for Amazon, 3 of our last 5 packages have been late, including this one. A couple of those were weather delays but not this time. Step it up, Jeff.
...
show more
Reviewed in the United States on February 11, 2026 by Mary Lynn Stratton
Size: 1-Medium with LED
I purchased this to print with ABS, and really like it. It keeps both the smell and noise to a minimum, while also helping maintain temperature for the printer. I have about 3 inches to spare on each end depth wise, and about an Inch on either side in width. Height is no issue at all even with the spool holder mounted. I have this sitting on an IKEA Lack table, so there is about 1 inch of overhang on the front and back. I love the fact that this comes with an LED light, which helps tremendously. It also has an exterior side pouch that I use to hold snips, pliers, and bed scraper, and a roll up window on the left side that I supposed you could feed through if you had an exterior filament dryer. I ended up punching a small hole on the right side near the top of the printer so that I could feed filament from my dryer that sits elevated. That's really my only con for this enclosure - it needs more grommeted holes on the top and sides for exterior feed configurations from external dryers. All in all, it's a good enclosure that suits my needs.
...
show more
Reviewed in the United States on August 3, 2024 by Gr8tful4Vine
Size: 1-Medium with LED
I've been meaning to get an enclosure for ages, as my printer sits near an HVAC vent and I know that doesn't help prints. Temps vary wildly in the basement too, and I'm sure that isn't helping. Finally pulled the trigger on this enclosure. The medium size is HUGE and has more than enough room for my Ender3 Pro. Assembly was straightforward, and didn't take too much effort. Directions were good. Just make sure you fully seat all of the rods into their sockets and you shouldn't have any issues. I found it easy to assemble the frame and set it on the floor, then slide the the cover over the frame, versus the directions saying to try to drop the frame into the loose cover. It's a snug fit, but it went on with no problem. I was able to zip-tie my webcam to the frame, so it didn't need to sit on the stand that I printed for it anymore, which is a nice space saver. I need to clean up some wires and make things look nice inside, but it's a great enclosure that should help me get more clean and consistent prints. It also cut the fan and printer noise way down, which is great! My only small complaint would be the light bar - it puts out enough light in there to work, but I feel like no matter where I've tried to move it, it's just not quite right with my webcam and Klipper. I see they sell additional lights, so I may buy one, or just design and print some other kind of solution. Other than that one small thing, which isn't worth knocking the product, as it's a personal preference, this enclosure rocks!
...
show more
Reviewed in the United States on December 20, 2025 by J. Foust
Size: 1-Medium with LED
Assembly was very easy. It all snapped together and made sense. The fabric fits over the frame without being too tight that it's a pain, but definitely is tight enough to stay in place. The quality is very good and better than I'd expected to be able to get for this price point. The zipper flap going all the way to the back is awesome for easy access to the printer. I have my printer on slightly higher feet but it still fits properly in the enclosure, though if you have the Extender or taller height you will want the bigger size. The included light bar is a huge addition, I get really good quality videos from my mounted camera and I don't need to light the whole room to do so. I have only printed PLA+ so far but I'm looking forward to printing Nylon, ABS and other materials that want an enclosure. The sound reduction isn't a huge factor but it does a bit for that as well. My printer was already fairly quiet and this made it very nice. The small door on the side will be useful if I decide to do some type of ventilation, especially for lasering. I'm looking forward to getting a lot more use out of this and I may try and figure out a way to print directly from my dryer while still being mostly enclosed. I believe there may be enough space in the enclosure for that.
...
show more
Reviewed in the United States on September 14, 2023 by Eric Busch
Size: 1-Medium with LED
Highly recommend. Having a good enclosure around your printer will improve it's reliability tenfold. My prints don't shrink away from the platform any more. This enclosure does a good job of holding the right amount of heat in. The LED light is super helpful.
Reviewed in the United States on August 4, 2026 by Anthony Shoemaker
Size: 1-Medium with LED
We are very impressed with this enclosure. It was extremely easy to setup and fits our Flashforge Adventurer 5M printer very nicely. Unlike a custom fit case, this does add to the footprint of the printer and requires more space than the printer itself, but if you have room it is a great value. The quality of the materials was higher than I expected for the price and I am particularly pleased with the insulative properties of it. There are plenty of access options for cords and such, but I plugged the USB light strip right into our printer and it makes for a convenient and bright workspace. Highly recommended for anyone who is looking for a simple enclosure to keep in warmth and fumes, and keep out dust or pet hair or whatever.
...
show more
Reviewed in the United States on December 28, 2024 by tflitters