2 Stroke 18HP Outboard Motor Short Shaft, 246CC Boat Engine with CDI Ignition, Water‑Cooled, 24L Fuel Tank – for Fishing & Inflatable Boats, Kayaks

Features

• Powerful 18HP WaterCooled Engine Delivers reliable 18HP power from a 246cc 2stroke core. The advanced watercooling system provides consistent performance and greater durability during long trips or heavyduty tasks than aircooled models.
• Heavy Duty Short Shaft for Wide Compatibility: With a robust heavyduty design and 15.7 (40cm) short shaft, this motor fits fishing boats, rubber dinghies, inflatables, kayaks, and small sailboats easy installation, ready to go.
• Efficient CDI Ignition & Responsive Control: CDI ignition delivers quicker starts, better fuel efficiency, and longer plug life. The responsive twistgrip throttle and FNR gearbox give you precise maneuvering and easy docking.
• Large Fuel Tank & Portable Durability 24L tank for extended range. Compact design, lightweight (approx. 86 lbs), and anticorrosive treatment make it ideal for both fresh and saltwater use.
• Reliable & Easy to Maintain Simple manual start and tiltup design for shallow water and transport. Minimal maintenance hassle. Best performance: use 50:1 fuel mix with quality 2stroke outboard oil.

Description

Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.Must Read before using!Two stroke 18 hp:Firstly, Fill the gear oil (open gear box lid and fill it).Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times.Thirdly, Fill engine oil don't exceed the head of the pattern.Forthly, turn the throttle to the start up and turn the accelerator gets up to 50%.Then, Rapidly pull the starter line.After the motor start, please turn the throttle to running state.Then, it can be operated now.Don't do the following will avoid cylinder Scoring:1，start the motor in the water2, use the motor when it stop cyling waterEven if you want test the motor, it should be done in the river!When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked. several issues with this motor first the linkage that goes from the gear selector to the starting rope to block the rope to be pull when the motor is in gear was unattached , and still after fixing it every time you go into any gear it gets unattached second, the starting rope doesn't retract all the way when you attend to start the engineBrand: HANGKAIDisplacement: 246CCShort shaft ：40cmGear ratio: 2.08(27:13)Cylinder: 2Max.Output(kw): 13.2Max.speed(r/min): 5000-6000Gear Positions: F-N-RPacking size: 133x71x38.5cmIgnition System: CDICooling System: Water-coolingControl System: Tiller controlStarting System: Manual startControl System: 93 gasolineN.W./G.W.(kgs): 38.6/49.5Bore x Stroke(mm): 56x50Recommended Propeller range: 3 -9"1/4''x8"Recommended Lubricant: 2 Stroke Lubricating oilMixing ratio

Brand: DYRABREST

Item Weight: 38.6 Kilograms

Color: black

Material: Aluminum

Engine Displacement: 246 Cubic Centimeters

Engine Displacement: 246 Cubic Centimeters

Engine Type: 2 Stroke

Operation Mode: Manual

Mounting Type: Transom Mount

Fuel Type: Gasoline

Maximum Horsepower: 17.53 Horsepower

Fuel Capacity: 24 Liters

Item Weight: 38.6 Kilograms

Item Dimensions D x W x H: 34.37"D x 13.07"W x 41.46"H

Color: black

Material Type: Aluminum

Brand Name: DYRABREST

Recommended Uses For Product: For Canoe, For Fishing Boats, For Fresh Water, For Salt Water, For Small Yachts

Manufacturer: KOUGER

UPC: 738630192061

Manufacturer Part Number: DVR578

Model Number: 18HP Outboard Motor Short Shaft

Unit Count: 1.0 Count