2 Stroke 3.5HP Outboard Motor, Outboard Motor Boat Engine, Heavy Duty Fishing Boat Engine Marine Engine with Water Cooling System Boat Motor

Features

• 3.5HP 2 StrokeThe 2 stroke 3.5 HP hangkai outboard is controlled by a handle, and the handle is operated by a clutch. There is no neutral gear, just idle mode or low speed mode. Adopt water cooling technology to improve the reliability of the whole machine.
• Main parametersFull length: 36''; Overall width: 14.5''; Overall height: 8.5''; Beam height: 16.5 inches; Full throttle working range: 4000-5000 rpm; Maximum output: 2.5KW 3.5HP; speed : 12km/h (four people); Type: Two-stroke; Short axle: 16''; Ignition system: CDI system.
• Main SpecificationsStarting System: Manual Start; Gaze Carburetion System: Choke Start; Prop Marking: 7-1/45-A (inch); Engine to Propeller Ratio: 2:1; Recommended Fuel: Regular Unleaded Gasoline ; Fuel Ratio: 35:1; Gear Ratio: 27/13; Package Dimensions: 38'' x 17'' x 12''); Package Weight: 26 lbs.
• NoteAll boat engines have noise. At present, we have not tested the decibel, but the noise is the same as that of motorcycles, which is a normal phenomenon. The machine itself is light in weight and can be used on boats under 100kg, with a load of 4 people. You must have a boat motor mount or hanging plate on your boat.
• Wide ApplicationsOur outboard boat motor is installed with excellent air cooling system, allowing you to fish all day without overheating. A perfect match for inflatable boats, fishing boats, sailboats and small yachts. Better performance, quick start, multi-angle positioning motor.

Description

BJTDLLX is always committed to providing our customers with the highest quality products and the most professional service. Our goal is to ensure that your outboard is always running efficiently and reliably. Our outboards motor undergo rigorous quality control and testing to ensure durability and superior performance. Whether you are an outboard enthusiast or a service center, BJTDLLX is your trusted partner. Announcements After in the sea water or turbid water cruising 1.Use the fresh water cleaning the outboard motor 2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water. 3.Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder,from that will cause the engine breakdown. 4.The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine. 5.Before the long term storing,you should run out of the gasoline in the fuel tank. Please Note: There are two pull starter included in the parcel(one is the machine, another one for spare) We don't supply wearing parts (pull starter)for free. Description: Short Shaft:40cm Overall length:92CM Overall widteh:36.5cm Overall height:22cm Transom height:42cm Full throttle perating range:4000-5000r/min Maximum output:2.5kw(3.5HP) Speed:10km/h Type:2-stroke Ignition system: CDI system Starting system: Manual start Staring carburetion system: Choke start Propeller mark:7-1/45-A(inch) The engine and the propeller ratio:2:1 Recommended fuel: Regular unleaded gasoline Fuel to oil ratio: 35:1 Gear ratio: 27/13 Maximum speed: 10 km / h Built-in fuel tank: 1.3L Fuel consumption per hour: 1.5L

Brand: BJTDLLX

Color: 2 Stroke 3.5HP

Material: Metal

Engine Type: 2 Stroke

Operation Mode: Manual

Engine Type: 2 Stroke

Operation Mode: Manual

Mounting Type: Engine Mount, Transom Mount

Fuel Type: Gasoline

Maximum Horsepower: 3.5 hp

Fuel Capacity: 1.3 liters

Item Dimensions D x W x H: 14.5"D x 8.5"W x 36"H

Color: 2 Stroke 3.5HP

Material Type: Metal

Brand Name: BJTDLLX

Recommended Uses For Product: For Inflatable Boats, For Small Yachts

Number of Items: 1

Manufacturer: BJTDLLX

Unit Count: 1 Count

Included Components: 1

Item Type Name: 2 Stroke 3.5HP

Model Number: 2 Stroke 3.5HP

Manufacturer Part Number: 2 Stroke 3.5HP

Manufacturer Warranty Description: no