Buy Now, Pay Later
As low as
$2
/ mo
Learn more
- – 4-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Zip, Apple Pay, and Google Pay. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Sunday, Aug 30
Recently Viewed
Color: 0.4MM
Features
- Parameter and Specifications: Input diameter 2.00mm, Output diameter 0.4 mm, out thread M6, Thread length 4mm; a set of 25pcs printer nozzles and 5 pcs stainless steel needles. And the outer surface is marked with a size, So you can easily identify the specifications of the nozzle.
- Applicability and Compatibility: Our nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
- Precision Process: Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs. Due to all of above, not only reduce the resistance, avoid filament getting stuck on nozzle, but also effectively guarantee the service life of the nozzle, make out of filament more smoother.
- Precise Design: Cutting with the diamond knife, make the contact surface more flat, so it reduces the risk of printhead leakage greatly and avoid nozzles clogging.
- Each of our kit only comes in a single size, so you can feel free mix and match!
Description
Output port is perfectly round, minimizes the deviation of the printed model. Made with centering CNC precision automatic lathe, make sure the input and output holes are concentric, to get a uniform tip. One-time forming technology, make sure the interior of nozzle is smooth without burrs. Cutting with the diamond knife, make the contact surface more flat, so it can prevent printhead from leakage effectively and avoid nozzles clogging.
Material: Brass
Brand: Meafeng
Item dimensions L x W x H: 3.94 x 3.94 x 3.94 inches
Exterior Finish: Brass
Inlet Connection Size: 2 millimeters
Inlet Connection Type: Barb
Number of Ports: 50
Outlet Connection Size: 0.4 millimeters
Number of Packs: 1
Unit Count: 1 Count
Brand Name: Meafeng
Model Number: LM-G1RZ
Number of Packs: 1
Unit Count: 1 Count
Manufacturer: Meafeng
Number of Items: 30
UPC: 734830917633
Number of Pieces: 25
Set Name: Complete 3D Printer Nozzle Set
Manufacturer Part Number: LM-G1RZ
Exterior Finish: Brass
Inlet Connection Type: Barb
Number of Ports: 50
Thread Size: 6 mm
Thread Type: Metric
Valve Type: Needle Valve
Item Dimensions: 3.94 x 3.94 x 3.94 inches
Inlet Connection Size: 2 millimeters
Outlet Connection Size: 0.4 millimeters
Size: 0.4 mm
Material Type: Brass
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Sunday, Aug 30
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- Zip Pay in 4
- Financing through Apple Pay
- Financing through Google Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: 0.4MM
A mis-adjustment led to a nice scratch on the print bed, and complete marring of the flow path for filament, so I ordered a bunch of these expecting to make more mistakes. Quick to replace and did the job well. I still have 24 left, thought, so YMMV may vary on how much of these you actually need. But the price was right.
...
show more
Reviewed in the United States on December 28, 2025 by Brian
Color: 0.4MM
Pretty much the exact review I left for another size nozzle I reviewed 0.6mm. But these are 0.4mm and a larger quantity. They seem good quality and the actual nozzle itself is symmetrical. I have a video microscope at work and checked out all of these. They are all consistent which is a good thing. I have not tried these yet but if you can look close as I did with the microscope you will see that they have some left over residue on the insides. However you decide to use these I would recommend cleaning them first. Cold pull or as I am going to do is I have some left over brake cleaner and canned air from another project. Ill spray them first and then blow out with air. After I recheck them if there is still any leftovers material I will perform a cold pull. Check the manufacture or forum for your particular printer to see how this is done. Its pretty basic though. Heat up the nozzle with PLA filament to about 215°C, push some through then turn off or adjust the nozzle temp to where it will solidify and "stick" to the left over material and pull it back out of the nozzle. You might have to do this a couple of times but do it until it is clear. You can also do this between filament color changes to help remove and clean the nozzle for the next batch. Also these nozzles are not meant to last forever and depending on your usage should be replace occasionally, me I print daily so on average about every three months. Overall I like the shapes of these and with some initial cleaning I expect these to work. Ill update my review later if I have issues.
...
show more
Reviewed in the United States on January 24, 2024 by Scott
Color: 0.4MM
Bought this for my MakerBot Replicator Z18 Smart Extruder+. My nozzle was very used, clogged, and I refuse to purchase a brand new $250 extruder. I bought these super cheap ones and they fit and print very well! I did not adjust the bed or anything after installation. These should work for all Makerbot Replicator extruders. Super good price for what you get. TBH, 25 nozzles is too much, LOL!
...
show more
Reviewed in the United States on August 3, 2023 by KYS1296
Color: 0.4MM
I am no stranger to printing i use it for work, home fixes, gifts etc good nozzles are a plethora on Amazon one thing I noticed that occurred only with this nozzle brand is the filament gets stuck in the cooling block seemed like a normal clog wont go in wont go out but weirdly enough after removing the nozzle let it drop right out. One would assume oh just a clogged nozzle yet the nozzle wasn't clogged could it have been moisture and melting expansion? Sure but why haven't other nozzle brands done this to my printer idrk but just something to keep in mind. To avoid this I've found if im constantly printing its fine leave the filament in the hotend for a few days and guaranteed it'll be clogging in half an hour so now if I dont have projects lined up I have to pull it back out of the block with this nozzle doesnt make much sense since my printers and filament moisture controlled cabinets but thats what I got. The cleaning rods are standard nozzle count is a lot which is nice
...
show more
Reviewed in the United States on January 9, 2024 by Stephen
Color: 0.4MM
I have an Ender 3 pro, recently given to my from a coworker. It needed a new nozzle so I bought these. They were a perfect fit and easy to install ( with a little bit of common sense). I have not had any problems with leakage or clogging. Overall I’m a happy customer
Reviewed in the United States on June 15, 2024 by Russell Jones
Color: 0.4MM
I absolutely love these nozzles. I recently had a friend recommend some high dollar hardened steel nozzles. 2 x 0.4 nozzles for $30. And I absolutely hated them. They clogged constantly and the print quality was unpredictable at best. I threw them away and went back to these brass nozzles. These nozzles do wear down quickly with any kind of abrasive filament. But that's to be expected with any brass nozzle. However, the print quality is good enough and they're cheap enough that you can throw them away after a few weeks of use. That's the best thing about these. They're inexpensive and out of probably 50 nozzles I have used I only had one that had a defect that affected printing. If you want a cheap brass nozzle that prints great and you won't feel bad about throwing away if it starts to wear, get these. I always have at least a dozen of these on hand. As a matter of fact, the friend that recommended the expensive nozzles I spoke of earlier ran out and needed a nozzle. I gave him a couple of these and now he won't use anything else.
...
show more
Reviewed in the United States on November 18, 2021 by Adam
Color: 0.4MM
They worked well.
Reviewed in the United States on October 27, 2025 by Victoria C.
Color: 0.4MM
It's honestly the best value for printer heads. They fit fine, pretty easy to install. The quality is just like any other brass printer nozzles I've ever used. Never noticed any speed issues but I really like how you get so many for such little value. Whenever one gets clogged you can use the included cleaners too so that's cool. I've stripped a couple here and there just being clumsy, not a big deal though just replace it.
...
show more
Reviewed in the United States on May 8, 2025 by Amazon customer