ZK-1002 Bluetooth Amplifier Board with TPA3116D2 Chip Bluetooth and AUX Input DC: 5-24V
Condition: New
Checking for product changes
Buy Now, Pay Later
As low as
$4
/ mo
Learn more
- – 4-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Tuesday, Jul 8
Recently Viewed
Model: ZK-1002
Features
- High-Quality Audio Performance: Featuring the advanced TPA3116D2 HIFI Chip with AM Interference Suppression, our ZK-1002 amplifier delivers outstanding sound quality. Even during extended high-power usage, it maintains a THD (Total Harmonic Distortion) of less than 0.1%, ensuring a superior listening experience.
- Versatile Voltage Compatibility: The ZK-1002 supports a wide input voltage range from DC 5V to 24V, allowing it to be powered by 9V, 12V, 15V, 18V, or 24V sources. This adaptability ensures that you can easily find a suitable power supply.
- Dual Audio Input Options: Enjoy the flexibility of two audio input methods. You can seamlessly connect through the latest Bluetooth 5.0 technology for wireless convenience, or opt for the traditional headphone (line-in) connection for your audio source.
- Comprehensive Protection: Our BT amplifier is meticulously designed to safeguard your investment. It incorporates multiple protective features, including over-voltage protection, under-voltage protection, over-heat protection, and short-circuit protection. Rest assured that your device is protected in various scenarios.
- Optimal Power Match: Please note that achieving the best audio output requires the right combination of sufficient audio input and appropriate power supply voltage and current. Different speaker impedances will affect the relative sound power. With adequate voltage and current, higher impedance speakers will produce lower relative sound power. Pay attention to these factors to optimize your audio experience.
Item dimensions L x W x H: 3.35 x 2 x 1 inches
Voltage: 24 Volts
Manufacturer: DAMGOO
Maximum Supply Voltage: 24 Volts (DC)
Minimum Supply Voltage: 5 Volts
Is Discontinued By Manufacturer : No
Product Dimensions : 3.35 x 2 x 1 inches; 4.59 ounces
Item model number : ZK-1002
Date First Available : September 5, 2019
Manufacturer : DAMGOO
Country of Origin : China
Best Sellers Rank: #50,046 in Electronics (See Top 100 in Electronics) #218 in Audio Component Amplifiers
#218 in Audio Component Amplifiers:
Customer Reviews: 4.4 4.4 out of 5 stars 1,171 ratings
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Tuesday, Jul 8
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Model: ZK-1002
I have the DAMGOO ZK-502T and the ZK-1002 digital amps. They are both great running on a 16V laptop supply. Both provide plenty of volume. I have bought class-D for the TV and for the garage, and I got great results. I needed replacements due to a house fire. ** After a few weeks, mine failed. The BT "ready" signal continued to beep, interrupting music play on the wired input. BT has priority, and if it fails to connect, well, you are stuck with repeating beeps. Amazon Chat support quickly arranged for a warranty replacement with return of failed item. Replaced item works fine. ** The directions for these talk about what size of speakers they will support, and that small speakers require less power. This isn't right. The truth is that larger speakers are generally more efficient. In fact, if you have very large, efficient speakers, you can probably drive them straight out of your computer's sound card. I've done it. Your speakers will make all the difference; get good ones. If you go to a thrift store, only get a name brand like Sony, Aiwa, Yamaha, KLH, Pioneer. Never a lesser brand like Sharp or RCA. I have good quality 8 Ohm Yamaha speakers. If you use good quality speakers, you will not miss bass and treble controlls. Now I'll focus on the differences between these two that I think are most important. ZK-502T pro: bass and trebble controls! I like the flexibility. con: lame stick-on heat sink, probably should lay it flat. Better yet, mount with real thermal tape. ZK-1002 pro: larger screw-mounted heat sink, suitable for mounting in any position. Good, because mine is outside and exposed to the summer heat. pro: neat looking inductor coils, but I can't hear the difference. ZK-502T Current test with 2x 18650 cells (8 Volts) at 50% physical volume Average values: 50mA idle/quiet BT 100mA 50% vol BT 200mA 75% vol BT (with 1 Amp peaks) 600mA 80% vol BT (with 2 Amp peaks) 2500mA peak at 100% vol BT Recommended for long battery life: 2x 18650 cells with 2500mAh capacity, 12 to 24 hours runtime depending on volume. Better than some products off the shelf. Common A/C power supply recommendations: Minimum: 9V 1Amp Also suitable: 12V 3Amp, 16V 4Amp For 6dB greater distortion free volume: 19V 4.5 Amp Should probably not use less than a 12V supply with the 1002. The biggest difference between power supplies is that the audio is 6dB louder at most at 16V plus. The power regulator stays cool at 9V and begins to heat up at 16V. The main chip stays cool at 9V, and at 16V heat begins to build up as it is slowly dissipated through the board and components. I used a thermal camera to check this, and max temp I ever saw was a moderate 100 degrees F. Loud volume with a weak 9V supply can cause it to fail and restart. So only use a weak 9V supply if you plan on listening at moderate levels. With my 16V supply, there is sufficient current available for very loud music with no interruptions. Higher voltage is required for more volume, but results in more heat. At 16V, temps reach 115 degrees F. Semiconductors can take much more heat, and the main TPA311 chip has thermal protection. So these measurements are only for your information. The supplied stick-on heat sink didn't heat up much -- it is for show. Heat is also dissipated from the main chip through the board, however. I scraped off the black adhesive and used thermal tape instead -- with better results. I recommend you do this if you use a 24V supply. The reason I tested current usage was to confirm what I suspected -- that these amps are very efficient and require little power. I also wanted to know my battery life. I recommend 2 18650 cells. More than that will offer more volume, but will shorten battery life, as more power will be wasted in the power regulator. My AUX audio source is a Sony walkman mp3 player. Your source and/or a higher voltage power supply could get you more output power. But I believe it would never be close to 25 Watts, and this is something we should all be aware of. Bluetooth devices with Aux capability usually have better performance on BT. This amp is no exception. Idle power use is lower and audio is clearer at low levels. Current peaks at 2A before distortion sets in. Any supply with at least 2 Amps and a minimum of 9V should be good for a quiet location, 16V if a bit more volume is desired for a loud location. (edited) Good luck and have fun! -Chris
...
show more
Reviewed in the United States on February 21, 2021 by Christophe
Model: ZK-1002
The little amp arrived quickly (one day). My old Bose Sounddock stopped working. Replacing boards (especially without knowing which one was bad) is too expensive at around $50 per reconditioned board. I removed all boards from the Sounddock and this amp fit in with some grinding on the tray. I did not use the top and bottom boards that come with the amp. It sounds as good as the original Bose electronics. Bluetooth works nicely from our phones and the old IPOD plays through the headphone jack (although you must turn off the Bluetooth connection from the phone). You can see in the picture how it fit in with the volume knob where the Bose docking connection was removed. If you do this, be sure to keep the heat sink on the speaker cabinet as it makes a huge difference in the sound. I used an old laptop power supply with 19 V 3.5 amps. Also, the power supply jack appeared to fit, but the inner pin is smaller so I had to cut the cord and attach the jack supplied with the amp. I do agree that the wires on the supplied jack are to thin and difficult to work with, but it can be done.
...
show more
Reviewed in the United States on July 22, 2024 by Agreszler Agreszler
Model: ZK-1002
The media could not be loaded. Although it's not as powerful as advertised, it is a very good and versatile little Bluetooth amplifier. It's tiny, but it packs enough punch to push these 8 inch 80 watt speakers very well (with a 24v battery setup). It gets fairly loud, although it does lack on the bass quite significantly. Still, for the price it's a very good replacement amp for something like this altered altec lancing xpedition 8. P.S. it does continue drawing power even when the knob is off, just FYI. I remedied by installing a toggle switch to interrupt the power on and off (red led switch on top of the unit). Update 6-12-22: new sound video. Two months of aggressive use and still going strong. Definitely impressed by this little thing.
...
show more
Reviewed in the United States on January 13, 2022 by adrian
Model: ZK-1002
You hardwire power in at 9-24V DC and out to two speakers 100w each, potentially. This will power a variety of 2x ~ 6in speakers out there in the wild just fine. You will need a DC power supply with a fan in it (~200w, ideally 24V > 8A) for a full power sound. POSITIVE: The absolute best feature is the brilliant Bluetooth implementation. No delay, interruptions, warnings, Most, if not all info sounds are short chirps. It fades audio volume for alerts, does not cut out the audio stream. The turn of the volume knob/pot is smooth and dampened nicely a little. Mine unit had a scratchy sound from the pot when adjusting the volume without an input, but was completely silent when audio was playing. The BT antenna is in front next to the volume knob on the PCB. NEGATIVE: Surprisingly the included power cord tail to hook up to your DC supply is very small gauge wire, like 22-24 AWG twisted. C'mon. The wires that power my speakers from this unit are 14 AWG each. Bad place to cheap out on. I'll wire up my own barrel connector, unfortunately. If you're a consumer that knows how you're going to use this, it is great piece of engineering including on the firmware side; you won't be disappointed. If you're the manufacturer, please at least scale up the provided wiring.
...
show more
Reviewed in the United States on March 4, 2020 by Ric
Model: ZK-1002
This tiny amp is pretty amazing. I’m using in my garage with some older bookshelf speakers and a sub. I am thoroughly impressed with sound and volume I get from this tiny little piece of tech. I use it mostly for streaming music via Bluetooth and have zero problems connecting. I used a 3.5mm aux cable to connect to my TV and it works brilliantly. If I want to stream music, I connect to the Bluetooth, if I want stereo sound on tv, I disconnect from the Bluetooth on my phone and viola. It’s that easy. No need to ever unplug anything. My only concern when purchasing was the lack of a power source. Luckily, I had an old 19v laptop power source that handles the job with zero issue. No overheating heating and more than enough crisp, clear volume.
...
show more
Reviewed in the United States on November 15, 2020 by william pohlman william pohlman