ZIRO 3D Printer Filament, 1.75mm Glitter Sparkle PLA, 1KG Diamond Lavender | Fit for Most FDM 3D Printer, 1.75mm 1KG Spool, Dimensional Accuracy +/-0.03mm, Colorful PLA FilamenT
Condition: New
Buy Now, Pay Later
As low as
$5
/ mo
Learn more
- – 4-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Zip, Apple Pay, and Google Pay. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Sunday, Sep 6
Color: Diamond-lavender
Features
- [Finer and Denser Glitter Powder]- The ZIRO diamond filament is made of premium raw material with ultra finer and denser glitter powder than others, featuring stunning visual effects to your works. With higher strength, no odor, no warp, clog-free, and bubble-free. Allowing 3d printing enthusiasts to create amazing works with fewer issues.
- [Tangle-free]-Our ZIRO filament uses full mechanical wire winding to avoid tangles and knots during printing. And completely drying for 24hrs before vacuum sealed. Moisture-free and bubble-free to make 3d printing much easier. (Please remember to store the filament with the re-sealable bag after use to keep it dry)
- [1.75MM Filament Accuracy ]- Advanced CCD diameter measuring control the dimensional accuracy of the PLA is +/- 0.05mm. The strict tolerance guarantees that ZIRO filament printing is easier and more stable. Suggested printing settings, nozzle: 190-220 C, bed: 50-60 C, speed: 30-90 mm/s.
- [Fits For Almost All FDM Printers]- ZIRO 3D printing filament works perfectly with most printers on the market. A plastic reel with a larger inner diameter design makes feeding smoother. Spool diameter: 7.99inch, spool width: 2.48inch, hub hole diameter: 2.36inch.
- [What You Will Get]- 1KG diamond-lavender PLA + a free reseal bag + a 5M cleaning filament + a 5M random filament sample. And our friendly customer service. If you have any questions or suggestions, please get in touch with us. We will do our best to solve your problem.
Description
Net Weight : 1kg/ 2.2lbs Diameter: 1.75 +/- 0.03mm Wire length: about 330-340m/ 1082-1115ft Density: 1.24g/cm³ Allowing 3D printing enthusiasts to create stunning works much easier. ZIRO 3D printing filament works perfectly with most printers on the market. A plastic reel with a larger inner diameter design makes feeding smoother. Suggested printing settings, nozzle: 190-220˚C, bed: 50-60˚C, speed: 30-70 mm/s. What you will get- 2.2 lbs Diamond Lavender PLA filament + a free reseal bag + a 5M cleaning filament + a 5M sample filament ( random color) Color choices for ZIRO Diamond PLA Series: Ultra finer and denser glitter powder ZIRO is a professional 3D filament brand created in 2015. Our products have gained loyal fans worldwide after over eight years of development. Our lineup of 3D FDM filament is shaped both by our forward-thinking ideology and the experience of our distinguished past. If it bears the ZIRO name, it is proudly designed and produced with only the finest materials, then rigorously tested and precision-assembled in the factory. Visit the Store Visit the Store Visit the Store
Brand: ZIRO
Material: Polylactic Acid
Color: Diamond-lavender
Item Weight: 1 kg
Item Diameter: 1.75 millimeters
Brand Name: ZIRO
Manufacturer Part Number: Z00003D-D-LA
Unit Count: 35.27 Ounce
Manufacturer: ZIRO
Item Weight: 1 kg
Item Diameter: 1.75 millimeters
Material Type: Polylactic Acid
Color: Diamond-lavender
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Sunday, Sep 6
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- Zip Pay in 4
- Financing through Apple Pay
- Financing through Google Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: Twinkle-red
This glitter PLA filament prints smoothly and adds a striking sparkle effect to my 3D prints. The semi-transparent material gives a unique finish, and it performs well with consistent diameter and no clogging. I'm very satisfied with the quality and the vibrant colors.
Reviewed in the United States on March 26, 2026 by Charlie Price
Color: Peacock Teal Luster
I had no issues with bed adhesion on my PEI sheet and the consistency was great from start to finish. ZIRO consistently delivers a high-quality product.
Reviewed in the United States on March 31, 2026 by Manuel
Color: Twinkle-red
I’ve bought every brand of filament before I found this brand and I haven’t bought from anyone else since. Consistently: Wound beautifully, never clogs, samples included (and I usually end up buying the full spool of the sample :) and the end result is beautiful. Thank you Ziro.
Reviewed in the United States on July 12, 2026 by Mary B. Beckmann
Color: Straw
**Soda can added for scale** I have previously used Ziro silk gold & silk silver filament (they are GORGEOUS and print great). My previous bust prints I'd been using Hatchbox granite PLA, which is awesome, but about $30/roll normally. So I was looking to find a less expensive, but still quality alternative. This is one of two "stone" options I am trying. I printed a filament swatch as soon as I opened the package...it printed well but it did have some minor issues with adhesion to the PEI plate I use. A small piece of blue tape solved the issue. After a successful swatch on the 2nd attempt at it, I immediately set out on this 300mm tall Princess Leia bust from Return of the Jedi. 18 hours later and the print looked great. So why the 4 stars instead of 5? Reason 1 is the adhesion issues on the small print. The bust I ended up using a raft (as I do on most larger prints just for a safety net) and I had no issues with that (as expected because rafts are super easy to adhere to the bed, hence the point). Reason 2 is that there is a bit of minor stringing that I haven't seen with other filaments. Nothing major, but I'm used to getting NO stringing. So even a little was noticeable to me. So if you have stringing issues already, you MAY have a bit more with this filament. Obviously, it's just a warning as you can't know until you try, but just something to be mindful of. That's it. I really wish we could give 1/2 stars, as if we could, I would 100% give this a 4.5 star based on my experiences to this point. I know that specialty filaments tend to be a bit "moodier" to print compared to standard PLA. Comparing it to the Hatchbox, this holds up EXTREMELY well, with minor complaints and at 2/3 the cost. If something with the 3rd brand (Eryone) of "stone" filament changes my mind on this rating, I'll update. But I am REALLY happy with this overall. The color (straw in the stone PLA variant) is really gorgeous and adds to the marble-ish look. I'd definitely recommend giving this filament a try as it both prints and adheres to the base well above average. The key metric for good filament is "would I buy this again?" and I have to say without question I would do so. If I had a piece to be displayed for others regularly, I'd probably go Hatchbox still, but for hobbyists looking for stuff to make for display at home...this is more than you would probably ever need in terms of quality. Ziro impressed me greatly with their silk gold & silk silver...and they've done so again with their stone PLA. Setup - FLSUN Super Racer with MicroSwiss Dual Gear Bowden Extruder, MicroSwiss CM2 0.6 Nozzle, Capricorn Bowden Tube, FYSETC PEI build plate. Settings - 180c print temp, 60c bed (these settings worked great for ME and are my normal settings for PLA, your printer, even a FLSUN SR, will likely use different settings, just posting these to give more info to those looking at this filament).
...
show more
Reviewed in the United States on May 3, 2024 by Raven
Color: Diamond-green
It sparkles, kind of. I would call it a muted sparkle. If you know that going in, it is a 5 star product. I like that it comes on a plastic spool vs cardboard/pressed paper. Prints as good as any other ordinary PLA. Included zip lock bag and desiccant is a nice addition for storage.
Reviewed in the United States on June 29, 2026 by Heidi D.
Color: Twinkle-pink
This glitter pink turnt out really good no tangling. I’m new to the 3d world, I do recommend. Will be using this brand often. My printer didn’t finish the top for some reason but my 4 year old still loved the color 🥰
Reviewed in the United States on July 6, 2026 by Moni Babi
Color: Cf-black
**UPDATE 12-23-18** I have dropped my rating even lower to one start. This stuff just constantly jams. I have tried .4 and .6 hardened steel nozzles from anywhere from 215-230* and at 40mm/s and it prints GREAT and then randomly jams. If Im lucky enough to hear the bondtech BMG extruder skipping due to a jam I can usually run in, pull the filament, clip off the end that has the trash that wont extrude and reload the filament. If its doing infill then it usually works out. It has done this on EVERY print and at random times. All other settings are dialed in and it prints GREAT until it jams and ruins the print. If I cant trust the filament then its useless to me. I dont know if its just dirty filament or what but Ill have to try another brand at another time and compare. This is my first time printing with carbon fiber but I built my printer for it. Im using a E3D V6 with titanium heatbreak and matterhackers hardened steel nozzles. I found printing at 225 at about 20-25mm/s to be the sweet spot on my Tevo Little Monster delta printer. I had major major clogging issues though. I have had to clean out my heatbreak twice now and found that on the first successful print the filament would star slipping in my extruder and I would quickly pull the fillament, cut off the balled end and put the filament back in and it would go smooth again. It did that twice on a 3 hour print and luckily I was there both times it did it. Its almost like it hits a piece of something in the filament that wont extrude through the hot end and I have to snip it off to continue. Not sure what to say about it though, it looks like grey filament. I havent tested for strength though as the thing I made wont see any stress. Not sure what I was expecting but I may try another brand like carbon-x or something and see what its like before making up my mind on carbon fiber filament. All in all, this isnt that bad of filament but I did have issues but I cant say if its due to the brand or material.
...
show more
Reviewed in the United States on December 14, 2018 by Lason
Color: Twinkle-red
I am impressed. The roll I got has the best wind I have ever seen. Some rolls are like a coiled spring once you open up the package or have crossovers that prevent printing. This roll goes down evenly. I have been printing heart boxes for my kids Valentines parties are school and this sparkle 3d filament is by far the best looking stuff I have printed with. I may go through the whole roll printing these hearts.I will post more prints later when it finished. Printed at 210c and 215c and both temps seem to work. Sticks nice to the print bed which is PEI with Amazon Basics Glue Stick. I posted my design on GrabCab. Search "Valentine Heart Box" I am printing at 60% size of the STL file which is a great size. I also put Gcode with 10 lids and 10 bottoms for PLA and PETG. Update. I just got the Twinking blue and have had a few jams where it ruined my print. The red printed fantastic. The blue is taking a bit more effort. So far I have had 3 jams in the middle of prints. Same Prusa printer and same exact print with the same settings. Don't know what the differences are for this one. I have cleaned out the nozzle several times to make sure none of the glitter is stuck. Still amazing looking just a little worried not that maybe I got lucky on the first roll. I bought two reds and one blue and almost finished one entire red roll already and have a blue. The blue has been much more of a problem. Don't know why. When it goes to print fine detail it fails badly and as I said has a tendency to clogged my tip. The red has not have any problems and prints like normal PLA so far.
...
show more
Reviewed in the United States on January 31, 2018 by Richard Parker