SUNLU PLA+2.0 3D Printer Filament, Upgrade PLA+ Filament 1.75mm, Tougher and Stronger, Neatly Wound Filament, Dimensional Accuracy +/-0.02mm, 1KG Spool(2.2lbs), Oak Wood
Condition: New
Buy Now, Pay Later
As low as
$4
/ mo
Learn more
- – 4-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
20 left in stock
Arrives
Tuesday, May 12
Color: 1kg Oak Wood
Size: 1KG
Features
- Upgrade PLA+ Filament: Compared to standard PLA+ filament, SUNLU PLA+ 2.0 is more resistant to brittleness and cracking, making your prints stronger and more durable
- Supports Fast Printing: The improved PLA+ filament melts quickly and flows smoothly, enabling printing speeds of up to 300mm/s. This allows you to complete projects faster without compromising on quality
- Easy to Use: SUNLU PLA+ 2.0 filament is reliable and user-friendly, making the printing process smooth and effortless for both beginners and experts
- 1.75mm PLA+ 2.0 Filament: SUNLU 3D printer filament offers a dimensional accuracy of +/- 0.02mm, making it compatible with nearly all 1.75mm FDM 3D printers
- Neatly Wound Filament: SUNLU introduces the first PLA filament with a neatly wound design. The consistent winding ensures there will be no tangling, or clogging during the printing process
- Wide Application: PLA plus 2.0 3D filament has a broad range of applications, suitable for printing high-precision models, functional parts, and decorative items
- Recommended Settings: For optimal results with SUNLU PLA+ 2.0 filament, we recommend a nozzle temperature of 205-220C, a bed temperature of 50-60C, and a print speed of 100-300mm/s
- Vacuum Packaging: SUNLU 3D printer filaments are sealed in airtight vacuum packaging to ensure they stay moisture-free
- Filament Spool Dimensions: 1KG Spool Diameter: 195mm, Spool Width: 57mm, Spool Hub Hole Diameter: 63mm. SUNLU reusable spool reduce waste
- SUNLU's Main 3D Products: SUNLU offers a variety of high-quality 3D printing products, including 3D printer filament, filament dryer, 3D printer resin, resin curing box, and other accessories
Brand: SUNLU
Material: Polylactic Acid
Color: 1kg Oak Wood
Item Weight: 1 Kilograms
Item Diameter: 1.75 Millimeters
Brand Name: SUNLU
Additional Features: Improved Strength and Durability, Faster Printing Speeds, Neatly Wound Design, Eco-Friendly Material
Manufacturer Part Number: DCCA-PLA+2.0-OK-1KG
Unit Count: 35.274 Ounce
Manufacturer: SUNLU
Number of Items: 1
Model Number: PLA+ Fast Printing Filament 1.75mm
Warranty Description: 30-Day
Material Type: Polylactic Acid
Color: 1kg Oak Wood
Item Weight: 1 Kilograms
Item Diameter: 1.75 Millimeters
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Tuesday, May 12
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: 8*250g Black+white+grey+blue+red+yellow+...
Size: 2KG
If you are new to 3D printing, know that these rolls are 250g not the 1000g that fits in the bambu AMS. These are a great deal, and with the PLA+ 2.0 they filament prints strong. You can print a reel these snap into to fit into the AMS. It’s a great deal and great filament. 10/10 recommend these. Colors are vibrant, adhesion to the print bed is good.
...
show more
Reviewed in the United States on March 18, 2026 by The Crowells
Color: 1kg*4 Black+black+black+black
Size: 4KG
Arrived quickly. Outer box in great shape. Each package still vacuum sealed. First spool printed very nice. No stringing and no fuzz like some filaments leave. No issues with sticking to the bed or between layers. Color is true black and no problems with the extruded feeding it so size is great. I wanted a few of the reusable spools and these are in great shape, the price per spool was less, and it’s like I’m getting them free without having to print them myself. Win, win for me.
...
show more
Reviewed in the United States on February 28, 2026 by FatMilkDud
Color: 1000g Black
Size: 1KG
I’ve been running this SUNLU PLA+ 2.0 on a Creality Ender 3 V2 (Klipper, stock motion hardware) using both 0.4mm and 0.2mm nozzles for a mix of functional and detail prints. Most of my printing was done between 205–210°C, which gave the best overall results. I did test down to 195°C with the 0.2 nozzle, but interlayer adhesion dropped off noticeably. At 205–210°C, layer bonding was significantly better than standard PLA I’ve used before. Not quite PETG-level toughness, but much closer than typical PLA. Print settings & performance: I typically run around 175 mm/s with 7500 acceleration. First layer is slowed to 20 mm/s with 0% fan, gradually ramping to full fan by layer 4–5. This setup produced very consistent results. Stringing was almost non-existent. Overhangs came out clean and crisp, and smaller bridges showed minimal sagging. Longer bridges (around 2 inches or more) did show some sag, but nothing outside expectations. Layer height & detail: Most prints were done at 0.04 layer height with a 0.12 first layer, and detail came out very sharp. I also tested 0.2 layer height, which still produced clean, crisp results without noticeable loss in quality. Bed adhesion: Using a stainless PEI build plate at around 45°C, adhesion has been phenomenal. I haven’t had a single print fail due to bed adhesion. Print quality & consistency: Surface finish is smooth with a slight gloss. Color remained consistent throughout the roll. Filament diameter stayed within about ±0.05 mm, typically measuring slightly over nominal (+0.03 to +0.05 mm). Other notes: No noticeable moisture issues so far, even without a dry box. Overall: For the price, this is one of the best PLA+ filaments I’ve used. It prints reliably at high speeds, has excellent layer adhesion at proper temps, and delivers consistent quality across different layer heights. Great option for both functional parts and detailed prints.
...
show more
Reviewed in the United States on April 8, 2026 by JkPhoto
Color: 1kg*2 Grey+grey
Size: 2KG
The media could not be loaded. The SUNLU PLA+ 2.0 has been performing exceptionally well across multiple functional prints. Dimensional accuracy is strong, layer bonding is uniform, and surface finish remains smooth even on taller parts. I’m currently using it to build a riser kit and tilt kit for my AMS 2 Pro, and the parts are holding tolerances that align perfectly with my hardware. From a printability standpoint, the filament runs clean with minimal stringing at ~205–215°C and 60°C bed on a 0.4 nozzle. Flow behavior is stable, and extrusion remains consistent over long print jobs without visible under-extrusion artifacts. Supports remove predictably without tearing surface layers, and bridging holds shape without sagging once tuned. Mechanically, this PLA+ strikes a good balance between stiffness and toughness for functional assemblies. Threads cut cleanly, press-fit joints hold, and fasteners seat without cracking. Warping has been negligible, which is important for alignment-critical builds like risers and tilt mounts. Moisture sensitivity seems lower than typical PLA variants; after sitting a few days out of the bag, it still printed cleanly, but storing it dry is still recommended for best results. Color uniformity across prints has also been consistent, which matters when parts are visible. If you need a filament strong enough for functional work without jumping to ABS, ASA, or engineering blends, this PLA+ is a reliable choice. For hobbyists and makers who build multi-part mechanical projects, it delivers performance that outpaces its price bracket.
...
show more
Reviewed in the United States on January 23, 2026 by Jules
Color: 1kg*4 White+white+white+white
Size: 4KG
Buying the bundle is definitely more cost efficient, especially if you print a lot like I do. White is one of my main colors, and I’ve never had any issues with this brand. Prints come out clean and consistent every time, and the filament runs smoothly without giving me problems. If you’re looking for a reliable go-to filament and want to save a little by buying in bulk, this is a solid option.
...
show more
Reviewed in the United States on March 18, 2026 by M Adams
Color: 1kg*4 Black+black+black+black
Size: 4KG
Great quality and size for the price of it! We print mostly in black so the color is great. It adheres to the plate just fine and we have had 0 issues with the filament. Don’t forget to cut the tip off with scissors before putting it into the machine so you don’t use the kinked part. Highly recommend.
...
show more
Reviewed in the United States on February 28, 2026 by William R.
Color: 1kg*4 Black+black+black+black
Size: 4KG
I m impressed with the consistency and quality of this PLA+ filament; it feeds smoothly through my printer without tangling or clogging. The filament came vacuum sealed with desiccant packets and each spool was clearly labeled, which kept it dry and ready to use right out of the box. Prints using this material have had a nice matte finish and improved strength compared to standard PLA, and the dimensional accuracy has been spot on across all four spools. I appreciate that you get a variety of colors in this bundle, making it easy to experiment with different projects without buying individual rolls. The only downside is that some colors seemed slightly darker than the pictures and I did notice a bit more stringing at higher temperatures, but overall it's a great value for everyday printing.
...
show more
Reviewed in the United States on March 31, 2026 by Charlie Price