SUNLU 3D Printer Filament, Toughness PETG Filaments for 3D Printing, Neatly Wound Filament, High Strength, Better Flow, No Clogging PETG Filament 1.75 +/- 0.02 mm, 2KG, PETG Filament Random 2 Colours
Condition: New
Checking for product changes
Notify me when this product is back in stock
Buy Now, Pay Later
As low as
$7
/ mo
Learn more
- – 4-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
This item is eligible for return within 30 days of receipt
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Unavailable
Recently Viewed
Color: Petg Different Colours
Features
- 1SUNLU 3D Printer Filament Blind BoxMultiple Color Choices, 2KG in Total, 2 Spools of 1KG SUNLU 1.75mm PETG 3d printer filament. 2 colours random: Black+White+Grey+Transparent+Blue+Green+Red+Orange etc. SUNLU design of 1kg PETG 3d printing filament is convenient for customers with multiple color needs. Especially for multi-nozzle 3d printer users and 3d pen users.
- 2SUNLU Toughness PETG 3D Printer FilamentSUNLU PETG 3D printer filament is a rigid, tough, high performance material, offering excellent clarity, light transmission and high gloss. PETG 3d printing filament about as stiff as PLA filament. PETG 3d filament suggest printing temperature is 220-250C, base plate temperature: 70-80C if no glue applied.
- 3PETG 1.75mm Filament Diameter1.75mm PETG 3D filament(Tolerance Level : 0.02mm). 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, approximately 330 Meters of PETG filament on each spool ease of use,minimal warping,no clogging,no bubbles. Increase your 3d printing objects delicacy.
- 4High Compatiblity & Vacuum Pack PETG FilamentCompatible with 99% FDM 3D printers (with heated beds) and 3D pens.Vacuum packed neatly arranged SUNLU PETG filament provide better printing result. less stringing and warping, strong layer adhesion. Article-free and impurity-free.
- 5SUNLU 1KG Filament Spool Diameter1KG Spool Diameter:200mm (8.5inches), Spool Width: 64mm(2.5inches), Spool Hub Hole Diameter: 56mm(2.2inches). 1KG spool size of SUNLU 3d printer filament is suitable for hanging on a lot of FDM 3D printers.
- 6SUNLU 1KG Spool DiameterSpool Diameter: 203.2mm(8inches), Spool Width: 63.5mm(2.5inches), Spool Hub Hole Diameter: 55.88mm(2.20inches). 1KG spool size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers.
Brand: SUNLU
Material: PETG
Color: Petg Different Colours
Item Weight: 1 Kilograms
Item Diameter: 1.75 Millimeters
Manufacturer: SUNLU
Brand: SUNLU
Item Weight: 2.2 pounds
Package Dimensions: 8.5 x 8.5 x 5.2 inches
Item model number: SUNLU PETG 3D Printer Filament
Color: Petg Different Colours
Material Type: PETG
Number of Items: 2
Manufacturer Part Number: DCUS-PETG-MH-1KG*2
Date First Available: April 14, 2023
Frequently asked questions
This product is currently out of stock. Please check back later for shipping info.
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Sunlu makes really great petg and is my current go-to petg. I print on a Bambu X1C with AMS and have tried many brands of petg. Sunlu is consistently good at a great price. The print quality is fantastic and it requires almost no tweaking at all. It just works over and over again, spool after spool, producing clean quality prints.
...
show more
Reviewed in the United States on December 3, 2023 by Colin
This Review is for the White+Black combo pack. TL;DR: This filament is good, but the white is milky translucent. Getting the right temperatures for your printer with PETG is a must. I'll buy it again. Printer: Prusa i3 Mk3s. Nozzle: .4 Nozzle Temp: 235 Bed Temp: 90 Extrusion Multiplier 1.05 Print Speed: 50mm/s Fan speed: 100% after layer 3 Bed type: Textured Spring Steel I read all the reviews and spent a considerable amount of time getting the profile just right so that I could print successfully. The results of the prints have all been good with minimal stringing and only minor shrinkage/warping on large parts. Sliced 153mm disk at 3mm thickness with a 5mm hole. After the part cooled, I was left with 151x2.85mm disk and a 4.8mm central hole. This amount of shrink can be controlled for, and honestly the fault may not be with the filament, but with my slicing. Fortunately this part really only needs to be good enough. I will happily recommend this filament with only a few caveats. The first of which is, not the white color. It is less white than it is just colorless. It is a milky translucent, and the fill lines are easily discerned in the disk, even with the 3 bottom and 4 top solid fill layers. If you are looking for white, this isn't your filament. Fortunately, what I will be using this particular spool for are parts whose color doesn't matter at all. If color doesn't matter buy the white, it prints very well. Second, print with a brim. I printed some taller parts that did curl at the edges on the bed. The curl was really only noticeable when I tried to join the two edges together, but a bit of sanding on a flat sheet of glass quickly solved that problem. With the textured sheet, that is a requirement for a flat join. Third, if you are using a textured sheet, it has to be clean. Not just eat off of it clean, surgeons scalpel clean. anywhere that I accidentally touched the bed, I lost adhesion. In the first layer you could literally make out the swipe of my finger on the bed where I removed a string of nozzle drool that dropped to the bed during the preheating stage in the first layer. Give the bed another wipedown with IPA before you preheat, and don't be clumsy clearing the drool like me. After the bed cooled, the part popped itself off, the skirt did not. Do the temp tower on your computer. At 230 and below, terrible bridging and minor stringing. At 240 terrible bridging and stringing. Walking in the settings really paid off for me.
...
show more
Reviewed in the United States on September 30, 2020 by JLeatherbury
Sunlu is another quality filament. Whether it's TPU, PETG, PLA, it just works. It's consistent, it has good layer adhesion, the colours are good, the price is reasonable. It's a very good filament brand, I've never had any issues with any roll of Sunlu I've used. It's right up there with Novamaker.
Reviewed in the United States on November 5, 2023 by Mac TheTrite
I ordered 3 rolls for about $15.00 each. One, the green, printed like garbage due to moisture. After drying, it, like the other two, prints great. First off, I have only tried one other brand of PETG, MG Chemicals, and I think it is pretty decent stuff. From my limited firsthand experience with PETG, combined with what I've seen online in tests, reviews, and comments, this Sunlu PETG was not what I expected. I expected a softer, more flexible filament which would yield before breaking. This stuff is quite hard and rigid. I have done a bit of break testing, and this stuff doesn't just break, it practically shatters. It will flex a little, but without perceptible stretching or "yielding," boom, it snaps and sends pieces flying. I do recommend eyepro. I recommend printing between 240 and 245 C. There seems to be some confusion, leading people to print it at 220C. This is not PLA. It will print at that temp, but layer adhesion will be very poor. I have mostly printed this in an enclosure at 240C with 70C bed temp. More than 70C bed temp seems to significantly increase elephant's foot. In these conditions, adhesion is EXCELLENT. While the normal correlations of print orientation and strength still apply, I am not breaking layers apart. Attempts to break along the orientation of the layers results in breakage across the orientation of the layers with no layers visible internally to my naked eye, just a glossy homogeneity. Regarding Annealing I have experimented with annealing parts by simmering in water for an hour or so, then slowly cooling. This yielded mixed results. It did make result in parts that were less brittle (at least in the short term), but dimensionality could be affected in ways that could be challenging to compensate for. Some parts that were symmetrical in two dimensions (x, y) shrank evenly and predictably, so that I could oversize them in the slicer and have a perfect part after annealing. Others that were symmetrical only in one dimension (x) shrank in part and grew in another, rendering them unusable.
...
show more
Reviewed in the United States on October 12, 2023 by Dave
This filament always performs fabulously on my Ender 5 S1printer!!! The adhesion is reliable and the print process is flawless. The high quality manufacturing and great winding on the spool is perfect. SunLu is my primary go-to brand for filament.
Reviewed in the United States on September 24, 2023 by Gojira55