SUNLU 3D Printer Filament, Temperature Color Change PLA Filament 1.75mm, Neatly Wound 3D Printing Filament, Dimensional Accuracy +/-0.02mm, Fit for Most FDM 3D Printers, 1KG Spool. (Orange to White)
Condition: New
Buy Now, Pay Later
As low as
$6
/ mo
Learn more
- – 4-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Only 1 left in stock, order soon!
Arrives
May 23 – May 28
Color: Temperature Color Change Orange
Features
- High-quality PLA Filament- SUNLU PLA filament is reliable, versatile, and easy to use. No clogs, bubbles and tangles, its excellent layer adhesion ensures high-quality prints every time.
- Temperature Color Change PLA- The Colour changes with temperature. It is orange at room temperature and becomes lighter as the temperature increases.
- Temperature of discoloration- The temperature of the palm of the hand can make the model color can become lighter, but also depends on the density of the filler.
- PLA Filament 1.75 mm- SUNLU Rainbow PLA filament consistent diameter tolerance 1.75mm 0.02mm, minimum tolerance to ensure consistent feeding and stable prints.
- Neatly Wound Spool- 100% neat rate that reduces the risk of tangles and jams, and provides a smoother and more efficient 3D printing experience.
- Fits for Most FDM Printers- Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers.
- Recommended settings- To achieve the best printing results, we recommend printing at a nozzle temperature of 215-235C, a bed temperature of 50-60C, and a printing speed of 100-200mm/s.
- Full of Artistry- Great for printing decorations to decorate a space with gorgeous colors, printing toys to share for kids to play with is also great.
- Vacuum Packaging- SUNLU PLA filament 3D printer filaments are vacuum packed with desiccant. Vacuum packaging avoids dust and moisture and can maximize the protection of filament from humidity.
- SUNLU Main 3D Products- SUNLU offers a wide range of high-quality 3D printing products, including 3D printing filaments, 3D printers and various materials.
Brand: SUNLU
Material: Temperature Color Change PLA
Color: Temperature Color Change Orange
Item Weight: 1 Kilograms
Item Diameter: 1.75 Millimeters
Manufacturer: SUNLUGW
Brand: SUNLU
Item Weight: 2.2 pounds
Package Dimensions: 8.03 x 7.99 x 2.48 inches
Item model number: 3D Printer Filament PLA Filament 1.75mm
Color: Temperature Color Change Orange
Material Type: Temperature Color Change PLA
Number of Items: 1
Size: 1KG
Manufacturer Part Number: SLUS-PLACC-OR-1KG-NEW
Date First Available: September 26, 2024
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
May 23 – May 28
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: 1kg Silk Black
'A Good and Superb PLA!' Frankly Id heard many fine things and some favorable comment on SUNLU Filaments! So having bought a roll an done a project I can Honestly Report that most of the favorable things reported are in truth correct as it is a 'Very Fine' Plastic and SUNLU definitely has its act together!!!. PROS: Makes a Neat an Classy looking Part! Easy to Run, Easy to Set Up! Its the Real Deal You Get A Full Roll of !st Class Filament! Almost the Only Silk PLA Plus+ on the Market!!!!! A Real Bargain as the Price is Fantastic for what you get!. Fast Amazon Shipping cannot be Beat!!!!! CONS: None actually cept If Id known this was a PLA+ Id have ordered it sooner!!!!! In General: Now In My Useage The SUNLU worked and printed quite well. Setup was simple, I use Sticky Blue painters tape. Set Nozzle at 259 and Bed 109 and let warmup for 10-15 mins. I set 1st Layer at Nozzle 257 Bed 100, Speed at 35 or 40! Then after 1st layer is down and hard I set the rest of the run at about say: Nozzle 250- or 255 Bed 60 0r 75 and let Speed run at 45... True "I Know" at those settings Ill get some stringing but 'I dont have any problems with layers not bonding and It don't take 'All Day' to get the part finished either. Yes I know there are all kinds of 'Micro-settings, But I know that most machines have there own 'Pet Settings for wanting to run right. Now most folks want to run 'Cold and Fast' But I tried that and got a LOT of junk parts!. For me I found that "Slow but Hot" seems to get 'Better Parts'..... Me I adjust my speed with a New Plastic until Stringing starts to appear then I back off fast!. I also run my tests a 'Bit Differently' as many will run a ducky or a benchly and its a good way. For Myself I have a small but 'difficult part', See it dont take much Plastic but if the plastic is good enough to make a 'Difficult Part' then the easy stuff will run Home Free as the SUNLU did!!!!!!!!!! Now One Major Complaint w Sunlu is it doesnt extrude well or the teeth dont grip the Plastic right!. Yes at one time 'I Had' that issue but here is how I worked around it!. A HOT TIP: Now sooner or later when the teeth wear down you will have to replace that drive extruder gear!. On most new machines its the round Brass One w the two small allen nuts sticking out the top side! Most guys re install the gear wrong, I know I did?????? Yes I did as most of us will do what the YouTube guys did as they 'Set It' Plumb in the middle!. Hey if you are satisfied and it works for you go for it!!!!!!!!!! But there's a Better Way, In stead of in the Middle I just slid the Gear down a notch and let the plastic run off the teeth on the Top Side of the Gear as it grips better and runs smoother too. Oh yes it will surely wear like they all do in time, But if you did it right there is no great need to replace the gear not by any means sic!!!... Just loosen the allens then "CAREFULLY" slide the gear back upwards until the Teeth on the bottom which are still good are NOW gripping the plastic as I think its pretty neat to reuse and get good service from the same part twice!!!!!. TO: Close; SUNLU Silk PLA is super good stuff that is easy to set up, It runs fine and makes a good part!. And to Finish Its the only PLA+ that runs a silk fibre so it has Very Considerable strength and I definitely Intend to try some Printer Gears with this and the smooth finish makes a classy looking part too!. Kudos to the Seller! Kudos to Amazon! Nuff Said... IndianaED
...
show more
Reviewed in the United States on November 24, 2022 by Clarence E. Royce
Color: Rainbow 03
Good quality and super pretty! Great value and great print quality. Only complaint is it's more purple on the reel than pink.
Reviewed in the United States on September 30, 2025 by James White
Color: Rainbow 04
Beautiful 3d filament, works perfectly in our bambu labs 3d printer. Love the rainbow variation of colors.
Reviewed in the United States on September 28, 2025 by Lin
Color: Rainbow Regular-01+02+03+04
Good adhering to print bed. However, the filament is brittle for connecting parts.
Reviewed in the United States on September 12, 2025 by Kelly D.
Color: Glow in the Dark - Red to Glow Red
I frequently use the Sunlu red glow-in-the-dark PLA on my Bambu 3D printers, and the results are fantastic. The filament glows nicely for about one to three minutes after being charged under a light source. One thing to keep in mind is that you'll need to fine-tune your printer settings, as the filament can clog if the temperature isn't just right. Also, if you leave it unused for a few weeks, it can become brittle, so it's best to store it in a dry place and consider using a filament dryer before printing. Overall, it's a great filament with a beautiful glow
...
show more
Reviewed in the United States on July 27, 2025 by Edgar Edgar
The filament is poorly wound in the spool and incredibly prone to tangling. I've had larger models (200g and up) consistently fail mid-print because the filament broke. (I have a direct drive extruder that can pull hard enough to break a tangled filament easily.) There's nothing more frustrating than having a print that takes 80 hours have the filament feeding it break at the 60 hour mark. The bed adhesion is good and the print quality is decent. But if you're doing any large print, this stuff is unusable. And if you're doing small prints, expect that periodically you're going to have to redo them due to a filament tangle that trashed the print in the middle. UPDATE: 8/6/2024: This stuff still sucks. About a week ago I saw Sunlu filament on sale again, and I thought that after a few years (and a number of printer modifications at my end), I'd give them another try. Sunlu seems to have solved some of their tangling problems, but the filament itself doesn't seem to hold consistent diameter, and it remains prone to jamming/clogging. Since my first review of this stuff a while back, I've added a runout detector that includes both switch and slotted optical wheel. And I've gone from my old control board to a Manta M8P running Kilpper and Mainsail, so I can fine-tune sensitivity to wheel motion for jam detection. That's what clued me in to the filament jamming the way that it did. I'm using Orca Slicer, and I did the temperature and flow rate calibrations for the filament, running it at about 98% flow and 210C extrusion with 70C bed temperature. Print speed is generally in the 30mm-50mm range, and even on a bed slinger, this is hardly pushing it. I don't make enough parts to want to drive the printer for speed, but I do require quality prints. So I err on the slow side. In any case, this stuff seriously jammed the extruder, and all indications are that this was a result of unevenness of filament diameter. Before I was done, I was replacing a heater block assembly to undo the damage done by this stuff. (The nozzle is probably a complete writeoff, but I keep plenty 0.4mm nozzles in stock. And some Saturday when I'm not too busy, I'll recover the block, the heater element, the thermocouple, and the copper sleeve that goes into the heatbreak by disassembling them, scraping off the molten plastic, and where appropriate soaking them in acetone.) Overall, though, this cheap filament was not worth all the problems it caused -- twice. And at this point Sunlu is on my list of filaments I'll never buy again. I regret having given them a second chance as I did.
...
show more
Reviewed in the United States on December 28, 2022 by Eric D. Overton Eric D. Overton
Color: Real Wood+fiber Cherry+fiber Maple+fiber...
This is a fantastic filament for a realistic wood look. I've been printing some items with a wood grain finish and if I didn't know any better I would swear the item was at the very least a wood composite. I definitely recommend. I've found for best results to print slower.
Reviewed in the United States on August 22, 2025 by Grant Holder