Search  for anything...
CoYlBod

Printhead Cleaning Kit Printer Flush Kit for Epson ET-2850 ET-2800 ET-2803 ET-2760 ET-2720 ET-3850 ET-15000 ET-2750 ET-4800 2400 WF-7720 WF-7710 WF-7210 WF-7610 WF-3640 Printer Nozzle Cleaner

    • Based on 2,578 reviews
Condition: New
Checking for product changes
$9.69 Why this price?
Save $2.30 was $11.99

Buy Now, Pay Later

As low as $2 / mo
  • – 4-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Free shipping on this product

Eligible for Return, Refund or Replacement within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: Only 5 left in stock, order soon!
Fulfilled by Amazon
Arrives Sunday, Jun 16
Order within 58 minutes
Available payment plans shown during checkout

Recently Viewed

Features

  • Efficient UseTo solve illegible marking caused by print head clogging (Vertical stripes, horizontal stripes, text printing or incomplete patterns). This printer nozzle refresh cleaning kit will make the print more clearer, print color uniform and delicate.This printer flush kit has a capacity of 100ml.
  • Excellent Cleaning PerformanceThis printer head cleaning solution contains high-performance ingredients such as active enzymes, strong cleaning, environment-friendly material composition, which can effectively dissolve and clean OEM/factory inks, dye inks, pigment inks, sublimation inks, direct to transfer film ink etc. It will not corrode the print head, and will achieve effective cleaning and protect the print head.
  • Easy to OperateThe printhead cleaning unclog tool includes printhead syringe, silicone tube and instruction manual to make cleaning more convenient and easier. No need to disassemble the print head, easy to operate. Please refer to the manual or the operating video to get detailed operating information.
  • Compatible ModelsThis flush solution replacement repair kit is compatible for epson XP-100 XP-200 XP-300 XP-400 XP-310 XP-314 XP-410 XP-220 XP-320 XP-324 XP-420 XP-424 XP-330 XP-430 XP-434 WF-2510 WF-2520 WF-2530 WF-2540 WF-7620 WF-7610 WF-3720 WF-3640 WF-3620 WF-2630 WF-2650 WF-2660 WF-2750 WF-2760 WF-7110 WF-7210 WF-7710 WF-7720.
  • After Sales ServiceFor the printer printhead cleaner, the success rate reaches 80-90% (Depending on the length of your printer will determine the effectiveness of this product). We promise a full refund or a replacement if there are any problems with the product under your normal use. Just contact us and we will try our best to help every customer. [Risk Note: Self-repair may damage the printer. Please use this printhead cleaning solution as your last attempt.]

Manufacturer: ‎CoYlBod


Brand: ‎CoYlBod


Item Weight: ‎5 ounces


Product Dimensions: ‎1.85 x 1.85 x 4.06 inches


Item model number: ‎8541628141


Is Discontinued By Manufacturer: ‎No


Color: ‎printhead cleaner


Number of Items: ‎1


Size: ‎100 ml


Ink Color: ‎Tricolor


Manufacturer Part Number: ‎2H-1CTO-G432


Date First Available: June 4, 2017


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Sunday, Jun 16

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Saved my xp-440!! Important tips for success:
Review Image by A.A A.A
Review Image by A.A A.A
Review Image by A.A A.A
My yellow print head on my Epson xp-440 was severely clogged (completely blank print). I tried every other less-invasive procedure I could find but nothing worked. Bought this fluid as a last resort thinking my printer might be toast, but it WORKED! The product came as described (100ml bottle, syringe, gloves, instructions). Felt a little small for the price, but considering it saved me from buying a new printer, it's worth it. It is very important that you follow the instructions and watch some videos for your specific modal of printer before giving it a try. Print heads are very complex and delicate, if you inject with too much force you can burst the print head tubes and permanently damage your printer. And if you drip fluid all over the inside of your printer you could cause a short circuit. You must be extra careful, clean and patient. This is not a 10 minute fix; expect to spend a good weekend on it. Important tips: 1 - If you can, only remove the ink cartridge of the color you need to clean. If you need more space to access, remove all the cartridges, fit the syringe tube over the right color, then put the other ink cartridges back. It takes a long time to inject the fluid (at least it SHOULD if you’re doing it right), during which the other ink nozzles will start drying out if they’re exposed to the air for too long, causing more clogs. This happened to me but it’s not too hard to fix, just have to use some more fluid. 2 - When injecting, use BABY pressure. Even slower than is shown in videos online (where they are usually using brand-new clog-free printers for show). It should almost look like the handle isn’t moving, THAT’s how slow. The nozzle tubes inside the print head are miniscule; if you think about the physics, even a tiny amount of pressure on the syringe handle becomes exponentially more pressure inside those tiny tubes. So have PATIENCE. 3 - I layered a paper towel strip and two strips of watercolor paper (because it’s what I had) as my “blotting paper”. Worked well to catch the mess. 4 - Warm up the fluid per instructions. Makes a big difference. -Finally, this is how I cleaned my print head: Filled the syringe with 4ml of warmed cleaning fluid. Then gently fit it over the yellow ink inlet (the one that was clogged). With BABY pressure, I injected a tiny amount of fluid, just enough to get it into the print head. Then I left it attached like that for about 3 hours total. I came back every half hour and gently worked the syringe handle (pushing and pulling), slowly injecting a little more fluid every time until the whole 4ml were used. I then replaced the blotting paper and repeated the process with about 3ml of fluid. Once finished, I cleaned up the inlet area with a que tip, replaced the ink cartridges and let my printer sit for another few hours before turning it back on and running a test print. It’s important to let your printer sit for some time after cleaning for a couple reasons (1) to let the remaining juice inside the print head do its thing, and (2) to give any possibly missed drips of fluid/ink inside your printer time to dry out before you start running electricity through the machine (precaution to avoid short circuits). After all this, I had to run a cleaning cycle only once for my yellow to show up perfectly! Very happy with my purchase! ... show more
Reviewed in the United States on November 17, 2022 by A.A A.A
    • Follow the instructions, works well, if slightly messy.
Review Image by Glenn W Glenn W
Review Image by Glenn W Glenn W
I admit, I was skeptical if this would actually work. It arrived, in a plastic shipping envelope, well sealed. In the box, you get the fluid, syringe, and manual, as pictured. Following a video I watched earlier, which inspired me to buy this, I performed the cleaning. I am pleased to announce, it did actually work, to make my Epson XP-440, function again. Before this cleaning, only the yellow and cyan would print. A word of preparation and recommendation is to not force the fluid through the print head, as I heard on the video, and in other words, states in the instructions. It's not a fire hose force needed. GENTLY push on the syringe, making sure the tube is over the ink nozzle. I held the tube with my other hand to ensure it didn't pop off while pushing the cleaner through. Under the print heads, I slipped two sheets of paper strips to catch the cleaner and ink discharge. I should have used more like four straps, cut about an inch and a half wide. I was told 20mm on the video. But definitely use at least three strips, and make sure they come across the whole print head, out the other side. I filled the syringe, but did not end up using but about 2/3 of what was in the syringe. I put the rest back in the bottle for future possible use, made sure the bottle was capped tight. Once done, draw out the paper strips carefully, they will be wet and messy with ink. If you have latex or nitrile gloves, I suggest wearing them to keep ink off your hands. Have a trash can or bag at the ready to toss the inky, wet straps out, watch for drips. Paper towel around where the track is, where the head is sitting, to the right of the carriage, and blot the area, a few times. I then gently blotted inside the cartridge carriage, around the nozzles to clean up excess fluids. Using too much fluid, you risk getting it in the circuitry. Avoid that, definitely. Follow the instructions, take your time, and be patient. Those are key. The fluid in the bottle should be warmed, by using hot water in a small bowl, set the main body of the bottle in the hot water to warm up about three minutes before you start. I used faucet hot water, which, if it's about 115 degrees or slightly better, should do well. Do not microwave the bottle of solution. Again, follow the instructions, and you'll do fine. It does work to clear clogged print heads. Though a bit messy, worth the $13 I spent to have my printer back. ... show more
Reviewed in the United States on April 11, 2021 by Glenn W Glenn W
    • It works
Review Image by David Burkhart David Burkhart
I got this flush kit for my Epson Workforce all-in-one printer/scanner. The print began streaking one day and the more I tried to fix it, the worse it got until all colors would no longer print anything. So, I gave this kit a try and Bam! I flushed the heads once and got immediate results on all heads. They weren't perfect yet. But, they were at least working again. I tried a few more times, also applying the tips in the manual, like heating the solution and reversing the pressure a few times. Eventually, most all of the streaks went away. I now just have minor streaking and splatter from the black head. I suspect this might be dried ink on the outside of the head, which this kit wasn't designed to address. But, a Q-Tip, a drop of the solution, and a lot of luck at blindly finding the head should do the trick. Update (24 hours later): As for the planned Q-Tip procedure, it was a really tight fit, even for just a Q-Tip. But, it did allow me to find and remove the suspected cluster of dried ink. So, the black-splatter problem appears to be resolved along with less streaking. I still have only 5 black nozzles left to unclog (yeah - so good I can count the bad ones left). About 1.5 dozen yellow nozzles and most of the cyan and magenta nozzles are clogged again. So, it could be something wrong with the capping station (the part that keeps the nozzles from drying out) for the color nozzles. Update (1 week later): I gave the color print-head another two good flushes, with some extra soak-time for the troublesome magenta. Voila! Nearly perfect. The rest will probably work themselves out the more the printer resumes use. ... show more
Reviewed in the United States on December 16, 2018 by David Burkhart David Burkhart

Can't find a product?

Find it on Amazon first, then paste the link below.