32.7CC Gas Powered Post Driver, 900W 8500RPM Two-Stroke Pile Driver with 2 Sockets, Adjustable Handle Fuel Mixing Bottle Hand Pull Start Fence Stake Driver for Farm Garden Construction

1.The high-quality ABS, iron, aluminum and alloy steel materials are robust and wear-resistant, scratch-resistant, impact-resistant and rustproof, ensuring a long service life and good adaptability to the working environment. 2.The powerful 32.6cc two-stroke engine provides impact energy of up to 20-45J and impact frequency of up to 1200-2200r/min, realizing efficient handling of various piling work. 3.Complete Accessories: The proportioning pot, funnel, strainer and installation tool kit are included in the package for your convenience, so you don't need to buy extra. 4.Convenient Operation: It adopts the hand-pull start, and its throttle and flameout switch on the handle is integrated to facilitate your operation. Easy recoil starter. Vibration absorbing springs for stable operation.Post driver superior cooling vents for prolonged use and smooth running.Interlocking controls with throttle adjuster. The double handle allows for a more stable operation. It is wrapped with soft sponge for a more comfortable grip as well as to prevent slippage when your hand is sweating. The powerful 32.6cc two-stroke engine provides impact energy of up to 20-45J and impact frequency of up to 1200-2200r/min, realizing efficient handling of various piling work. Notes 1.The carburettor must be cleaned after every 100 hours of operation before use. The air filter sponge must be cleaned after 36 hours of operation. 2.If not used for a long time, the fuel and oil must be cleaned out of the tank and packed in a plastic bag to avoid dust and moisture entering the machine and affecting its use. 3.Pay attention to whether the oil inlet pipe is full of oil before use. 4.After starting up, you need to empty the throttle and let the machine start for a while before starting work. 5.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order. Machine+Sleeve*2+Proportioning Pot+Funnel+Tool Bag*1 Post Driver designed for all-day use with minimal operator fatigue thanks to comfortable grip handles and dampening springs that lessen vibration to reduce fatigue and back strain, making the pole pounder easy to lift, move, and carry down the fence line. 1.First, add the oil mixture to the tank. 2.Install a sleeve of the right size for the pile to be driven. 3.Check that the flame-out switch is in the "-" position. 4.Close the damper when the machine is cold to start, and you can open the damper to start when the machine is hot. Wait for the machine to be normal and then open the damper to use. 5.Press the oil bubble to suck up the oil pipe until the air is eliminated. 6.Start the machine and pull the starter continuously. 7.Set the hand grip to the right position. 8.Add oil to the throttle before working until the engine is normal and you can work when you hear a crisp sound. 9.Start working. Hit the depth you want and stop. 10.Stop working by just turning off the flameout switch to the “0” position.