Polymaker High Flow TPU Filament 1.75 Black, Shore 95A Flexible Filament 1.75mm 1kg Spool - PolyFlex TPU95-HF TPU Filament 1.75mm Soft Filament Flexible, Print 3D Printers Using 3D Filament TPU
Condition: New
Buy Now, Pay Later
As low as
$11
/ mo
Learn more
- – 4-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
This item is eligible for return within 30 days of receipt
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Friday, Dec 12
Recently Viewed
Color: 1.75mm, 1kg High Flow Tpu95, Black (Pantone: Black 6 C)
Material Type: Thermoplastic Polyurethane
Features
- Print Fast & UV Resistant TPU Filament - PolyFlex TPU95-HF is a Black flexible filament high flow TPU 1.75 ( high speed TPU filament ) with a shore hardness of 95A and boasts a large strain-to-failure test result with over 400%. Thanks to its high flow ability, it prints incredibly fast. It's also UV resistant which can be used outdoors
- Tangle Free & Moisture Free - Polymaker Black TPU soft filament is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue
- Flexible & Strong & Consistent & Outstanding Layer Adhesion - Super easy to print with. Great flexibility and shape memory. Polymaker 3D filament TPU is strong yet flexible, which has tough rubbery consistency and outstanding layer adhesion, also Bubble-free, Jam Free & Warp Free, easily get really perfect prints with proper settings
- Wide Applications - PolyFlex TPU filament 1.75mm ( Black flexible filament 1.75 )has wide applications including seals, plugs, gaskets, sheets, shoes, key ring case for mobile hands-bike parts shock and wear rubber seal (Wearable Device/Protective applications, such as shoe insoles, watch bands, phone cases, drone parts and more)
- PolyFlex TPU95-HF Printing Settings - Nozzle: 200 C - 220 C; Bed: 25 C - 50 C; Speed: 40mm/s - 100mm/s; Fan: On. Selected Diameter: 3D Printer filament flexible Black TPU 1.75mm ( Elastic filament Black TPU Roll )
- Note - PolyFlex TPU Flexible filament 1.75mm should be printed at lower speed than normal. It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. Turn off (or limit) retraction if possible. Turn up the bed temp to 80C or so for the first layers to get good adhesion
Description
Read more Read more Read more PolyFlex TPU95 Special feature: Wood mimic PLA matte finish Weight: 750g Diameter: 1.75mm/2.85 Print temperature: 210-230˚C Print speed: 20-40mm/s Packaging: Plastic spool, Cardboard box, Vacuum sealed with desiccant in resealable bag Read more
Manufacturer: Polymaker
Brand: Polymaker
Item Weight: 2.2 pounds
Package Dimensions: 8.74 x 8.66 x 2.52 inches
Color: 1.75mm, 1kg High Flow Tpu95, Black (Pantone Black 6 C)
Material Type: Thermoplastic Polyurethane
Number of Items: 1
Size: 1.75mm
Manufacturer Part Number: PM70295
Date First Available: November 8, 2020
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Friday, Dec 12
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: 1.75mm, 0.75kg Tpu95, Yellow (Pantone: Y...
Material Type: Thermoplastic Polyurethane
The media could not be loaded. I found the filament to be a bit tricky to configure (~30 minutes of adjusting). Once I figured it out, the printing is going great. Most of the trouble was connecting the infill properly, as it was only one path wide. 0) Turn off (or limit) retraction if possible! The filament got soft and bent around the feeder gear, with retraction on. 1) The printing speed on the box (30-90mm/s) does not match the speed on the roll (30-40 mm/s). I'm printing very slow.. probably 30-40mm/s. 2) With a triangle infill, Cura has it so there is a zig-zag pattern which produces the infill. The second zig-zags were tearing up the first, so I raised the extruder temp to 235C. Slowing down helped this too. 3) Turn up the bed temp to 80C or so for the first layers to get good adhesion, this stuff cools fast and then shrinks
...
show more
Reviewed in the United States on September 2, 2019 by Michael
This worked really well so far. It is very bendable but won't stretch very far. I'm using it on an Ender 3 Pro with a simple direct drive extruder conversion. Bed: Glass with glue stick, 60C. Nozzle: 220C. Increase flow about 5-7% vs PLA. This definitely does ooze more than PLA. Try to minimize movements over empty space. I was worried printing with flexible materials would be more difficult, but so far there's no issue.
...
show more
Reviewed in the United States on August 30, 2020 by Jeff Jeff
Color: 1.75mm, 750g Tpu90, White (Pantone: Whit...
Material Type: Thermoplastic Polyurethane
First time use of TPU and I found this to be very easy to print. Using a Prusa MK3 I choose the FIllamentum Flexfill 92A profile and adjusted the temperature to 220 and saved it. I used the default 0.2 layer height settings and adjusted any speeds greater than 50 mm/s down to 50 mm/s (recommended max speed per the guide). Everything printed better than expected on the first print. I did have some stringing when I printed multiple small parts closer to each other that was easily cleaned off. I have not yet taken the time to tweak anything to minimize stringing. Over I am very pleased with the PolyFlex90. For that matter I have been happy with every filament I have used from Polymaker.
...
show more
Reviewed in the United States on December 11, 2021 by DB
Color: White
Material Type: Thermoplastic Polyurethane
This filament is a lot softer and more flexible than other brands of 95A TPU filament, which leads me to wonder what the shore hardness actually is, because it seems considerably softer than 95A. Because it's so soft it requires a very high flow rate for extruder gears to actually grab onto it properly and push it through, even at 140% flow I was not able to completely eliminate under-extrusion with it. Overall this filament is just too soft.
...
show more
Reviewed in the United States on May 29, 2021 by T. McClelland
Color: 1.75mm, 0.75kg Tpu95, Yellow (Pantone: Y...
Material Type: Thermoplastic Polyurethane
This is a fun material. I've been mostly printing golf tees for an indoor simulator and after a few revisions I have made some that hold up great for many rounds. Prints great on my Ender 3 pro stock... just slow down print speed to 25 or 30.
Reviewed in the United States on March 16, 2020 by Richard
Color: 1.75mm, 0.75kg Tpu95, Yellow (Pantone: Y...
Material Type: Thermoplastic Polyurethane
TPU is one of the most difficult materials to print, and thats why a good quality filament is very important. All the packaging is very good quality and ensures a correct storage for the filament.
Reviewed in the United States on November 2, 2021 by JOamzn
It doesn't stick to the bed quite as well as advertised. I managed to get it working nicely at 240 C on an unheated bed with blue tape at 15mm/sec. Maybe the formulation has changed since it was first released - I saw a Youtube video with a PolyFlex spec sheet that varied from the recommended specs I received. I also had an issue with it wrapping around the filament feeder gear but that was probably my fault for not snipping off the first couple inches of filament.
...
show more
Reviewed in the United States on February 27, 2017 by Adam Wood Adam Wood
Color: White
Material Type: Thermoplastic Polyurethane
I'm printing on a Flashforge Finder @210 without difficulty. It's not very soft but it is flexible and worked well for me.
Reviewed in the United States on April 9, 2018 by Michael M.