OVERTURE PETG Filament 1.75mm, 3D Printer Filament, 2kg Filament (4.4lbs), Dimensional Accuracy Probability +/- 0.02 mm, Fit Most FDM Printers (Black + White)
Condition: New
Buy Now, Pay Later
As low as
$6
/ mo
Learn more
- – 4-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
Extended holiday returns
FREE refund/replacement until Jan 31, 2026 Learn more
FREE refund/replacement until Jan 31, 2026 Learn more
This item's return window has been extended for the holiday season: FREE refund/replacement until Jan 31, 2026
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Only 8 left in stock, order soon!
Arrives
Dec 21 – Dec 25
Recently Viewed
Color: Black + White
Features
- High Performance & Compatibility Combines the advantages of both PLA and ABS with Overture PETG, featuring the ease of printing with PLA and improved mechanical properties of ABS, including enhanced impact resistance and superior layer adhesion
- Clog-Free & Bubble-Free Designed and manufactured with our patented clog-free formula to get a smooth and seamless printing experience. All spools undergo thorough drying for 24 hours before packaging and are vacuum-sealed in resealable foil packaging. To maintain optimal performance, store PETG filament in sealed storage with desiccants (silica gel) or dry for >6 hours at 65 C
- Dimensional Accuracy & ConsistencyAdvanced CCD diameter measuring and self-adaptive control system in the manufacturing insure these tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy (98%) + / - 0.02 mm without any exaggeration
- Wide Compatibility and Color Selection Overture filaments seamlessly integrates with consumer and industrial 3D printers. Explore your creative side with our extensive selection of vibrant colors, ensuring a spectrum of possibilities for your unique creations
- Risk-Free & Lifetime Service Discover worry-free 3D printing with Overture filamentbacked by our lifetime satisfaction service. No matter the challenges, we're here to support you for a seamless 3D printing experience. Trust Overture as your dependable supplier of 3D printing filaments and accessories
Brand: OVERTURE
Material: Polyethylene Terephthalate Glycol
Color: Black + White
Item Weight: 2 Kilograms
Item Diameter: 1.75 Millimeters
Manufacturer: OVERTURE
Brand: OVERTURE
Item Weight: 4.4 pounds
Package Dimensions: 8.94 x 8.43 x 6.3 inches
Item model number: OVPETG175
Color: Black + White
Material Type: Polyethylene Terephthalate Glycol
Number of Items: 2
Size: 1.75 mm Diameter, 1 Kg ( 2.2lb ) Spool
Manufacturer Part Number: OVPETG175
Date First Available: December 19, 2019
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Dec 21 – Dec 25
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: Grass Green
Grass Green is pretty close to Ryobi's green. I printed PETG and found 250C, the max, was best. I also noticed it printed more shiny at higher temps. Duller at lower. 70C bed was fine and 80C no different on Sovol SV07 PEI bed. Fast led to problems. Sweet spot was around 38mm/sec for walls. If I dialed it up to 50mm/sec then stringing started. On a roll sitting for about 3-4 weeks it did pick up moisture which can cause your nozzle to accumulate some excess. Keep an eye out for it. If you come back to a final print with little extra blobs, it's probably knocked off the nozzle as it moved around. I used Cura default for wall thickness but I did drop my layers to 1.6mm for better arches. I didn't use bed adhesion (brim, raft, etc), bridges or supports but I also kept all my angles gradual. Look at the pic and you'll see they are basically circles. I used 20% infill as well as 30%. No real difference. When setting the power drills on the bracket arms, they only deflect maybe 1-2mm. Barely noticeable. Yes, by hand you can make it deflect 5-6mm but this is just to organize my tools, not create a climbing wall that will support lots of weight. I printed all of what you see with 1 spool. I have a 2nd loaded to do a ton of more tool wall brackets, but wanted to get this review up. If your print has started, and you have moisture issues, try bumping the temp up and keep an eye on it. You may get through it bumping 5 degrees at a time to watch for change. In my case, it was in the infill area, and so it's "entombed" inside. When I ramped up to 60mm/sec and got to higher layers, like around 300 of 500 (again, 1.6mm height layers) it did start to have issues rising a bit, and catching upon hot end return. I reduced the speed back to 32, and dropped the fan from 20% to 10% and the clipping stopped for a perfect finish. I do also use glue pen for adhesion to the bed, but even on a clean bed (no glue pen) I still had great adhesion. Finish is great. No stringing if I keep speeds down. Strong as you'd expect from PETG. I am super happy. I did read reviews that were negative but didn't have problems. The storage bag is resealable which is really nice. Spool did not detach on either spools. My filament was unopened on both rolls, ordered about 4 weeks apart. I will definitely order this product again as I get more of my power tools wall mounted, and when I get a chance I will upload the STL files to Thingiverse. I created these prints on TinkerCad. website, exported STL into Cura and then sliced GCode sent to Sovol SV07Plus.
...
show more
Reviewed in the United States on September 10, 2025 by John Schubert John Schubert
Color: 1 Kg Black
Filament came tightly vacuum sealed in a UV resistant silver plastic. It printed beautifully right out of the box without needing a drying cycle. The diameter is consistent, with no under- or over-extrusion. I did have to adjust the Flow Rate down slightly on my X1 Carbon - I think it veeeery slightly over-extrudes on the first layer, and dropping the Flow Rate to 0.93 seems to help. I have not experienced any clogging issues with the filament. I have printed well beyond the 50mm/s speed recommended in the pamphlet with no stringing issues, even with a nozzle temp of 255C. The black color I purchased is well pigmented and opaque. Overall, I am happy with the purchase. I also bought a spool of PETG white that I haven't used yet, but I expect similar results.
...
show more
Reviewed in the United States on November 22, 2025 by Warren W.
Color: Green
High quality filament at a fair price. I really enjoy Overture filament, it prints very well on my 3d printer. It is PETG though, so it needs to be dried (That's to be expected.) Dry it at 50c for 24 hours then store it in a dessicant dry box. The finished prints have a nice finish on them, and I don't have any issues with filament tangles. As far as consistency, I don't buy enough to comment on that, but it performs very well!
...
show more
Reviewed in the United States on September 9, 2025 by Adam
Color: 1 Kg Black
UPDATED REVIEW: Getting this PETG to print was a real struggle for me but... it ended up eventually working so in all fairness I've upped my review stars and I take credit for this as "user error". What it boiled down to was print speed. I was working with common slicer templates for PETG which print around 50mm/sec and I see other people reporting success at that speed but, it was a total mess for me. I found a few reviews that suggested turning the speed way down so I tried it and it made all the difference. I am working with a new Ender 3 v2 Noe with PEI build plate. Using about 240 nozzle and 80 bed. My esteps are calibrated spot on, and my flow calibrated to about about 88 for this material in my machine and these temps. I turned the main print speed down to 30mm/sec and the initial layers, supports, and walls down to 15mm/sec and it completely changed my printing experience with this material. ***HERE IS MY INITIAL REVIEW BEFORE I DISCOVERED SLOWING DOWN THE PRINT SPEED*** Based on other reviews and pictures, it seems some people have had great results with this filament. My expectations are low, I just wanted decent results as my prints are mostly functional and I am not overly concerned with aesthetics. Unfortunately after hours of testing and tuning I have not achieved a single acceptable result and will likely give up with this Overature PETG. The filament arrived sealed, I have stored it in a vacuum bag and use a heated filament holder when printing. My machine is a new E3v2 Neo with capricorn PTFE tube and a bi-metal heat break. I also print in an enclosure. ZERO luck with this roll of PETG. The pictures show two temp towers, the one on the left I printed with TECBEARS PLA and the one on the right with Overature PETG. Yes, PLA is nice to work with and as you can see, the PLA tower printed clean starting with 215 and 180 on the top; all layers were good with just a little stringing at the top cooler levels. Again, I just hoped for acceptable results with the PETG; I started at 245 on the bottom with 85 bed temp and finished at 215 on the top layer. All levels look terrible. My e-steps are tuned perfect, I did several flow tests printing single and double walled cubes which resulted in overflow and an adjusted flow rate of 88 which resulted in good flow test results on the test cubes but still most all prints fail, I barely got this temp tower shown in my pictures to print and as you can see, it is terrible in all regards. I have done a ton of tests for 1st layer adhesion and z-offset, my bed is super level (I use octoprint to visualize) and I've tried a few z-offset adjustments, no love... My last 1st layer tests turned out good and then I go to print and it wont stick, the filament globs up on the print head and smears around. I absolutely must have a brim, or better yet a raft or my print fails on the first layer. Sure, some folks have had good luck although I've put in the time and a lot of effort and I give up; I cannot get this filament to produce a useable print on my E3v2 Neo. I am not the only one reporting these challenges, maybe Overature has quality control issues with their PETG? Maybe I never found the perfect adjustments but I sure tried and I have to move on now, I can't spend my whole life trying to get a filament to produce "OK" results. ***SEE TOP OF REVIEW FOR UPDATED SUCCESS STORY***
...
show more
Reviewed in the United States on April 4, 2023 by Markcm Markcm