NETGEAR 24-Port Gigabit Ethernet Unmanaged Switch (JGS524) - Desktop or Rackmount, and Limited Lifetime Protection
Condition: New
Checking for product changes
Buy Now, Pay Later
As low as
$21.67
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Only 3 left in stock, order soon!
Arrives
Saturday, May 17
Style: 24 port | Rackmount
Features
- 24 Gigabit Ethernet ports
- Simple plug-and-play setup with no software to install or configuration needed
- Supports desktop or rackmount placement with the necessary mounting hardware in the box
- Lifetime Limited Hardware Warranty, Next Business Day Replacement, and 24/7 chat with a NETGEAR expert
- Energy efficient design compliant with IEEE8023az
- Silent operation ideal for noise sensitive environment
Description
The NETGEAR JGS524 Unmanaged Switch is designed for desktop or rackmount and features 24-Port Gigabit Ethernet, ProSAFE Lifetime Protection and more. From the Manufacturer NetgearÕs JGS500 Gigabit Switch Series gives your office network a megaboost of speed and capacity that is within your budget. With up to 48 Gbps of bandwidth, these 16- and 24-port switches can blast 2000 Mbps per port while their affordable prices enable you to put them everywhere. Use it to take Gigabit Ethernet directly to the desktop! Standards-based for easy integration of 10, 100, and 1000 Mbps devices, these unmanaged, rack-mountable switch feature 10/100/1000 automatic speed and full/half-duplex sensing plus Auto Uplink on every port. Users can take advantage of the their ability to deliver large amounts of multimedia, image, and video information in no time at all. Ideal for workgroups, labs, departments, or growing offices looking for oustanding performance at a low price. High Capacity 1000 Mbps speeds and a switching capacity of up to 48 Gbps meet the performance needs for even the most bandwidth-hungry applications. The JGS500 series are perfect for graphics, multimedia, and other applications that have to move large files across the network quickly. Affordable Aggressive prices enable your workgroup, department or small network to ramp up to Gigabit speeds, even all the way to the desktop. Flexible Each port is equipped with automatic speed and duplex sensing, plus Auto Uplink to adjust for straight-through or crossover cables to make the right link. Standards-based design makes it easy to combine 10, 100, and 1000 Mbps devices on your network. Convenient Easy to set up and easy to use, these unmanaged switches have per port LED's for effortless network monitoring. Compact enough for desktop but comes with a rack mount kit. Compatible with PC, Macintosh, Linux, and Unix operating systems.
Color: Black
Connector Type: RJ45
Brand: NETGEAR
Compatible Devices: Personal Computer
Cable Type: Ethernet
Product Dimensions: 18.11 x 9.13 x 3.23 inches
Item Weight: 4.97 pounds
Item model number: JGS524NA
National Stock Number: 5895-01-605-6139
Is Discontinued By Manufacturer: No
Date First Available: May 25, 2006
Manufacturer: Netgear
Language: English
Country of Origin: China
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Saturday, May 17
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Style: 5 Port with Enhanced Features
"I'm extremely satisfied with the NETGEAR 5-Port Gigabit Ethernet Plus Switch! This managed switch has significantly enhanced my network performance and control. Whether it's for home or office use, this switch is versatile and reliable. The desktop or wall mount options provide flexibility in installation, while the gigabit speeds ensure lightning-fast connectivity for all my devices. Setting up and managing the switch is a breeze thanks to its user-friendly interface. Plus, the compact design makes it perfect for any space. If you're in need of a reliable and efficient networking solution, I highly recommend the NETGEAR GS105Ev2!
...
show more
Reviewed in the United States on April 9, 2024 by Brody
Style: 5 port
I bought a NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch (GS105NA) more than 4 years ago, plugged it into my network (connecting my router and a few other devices via ethernet, including a computer, a TV, and a Nintendo Switch), and that was that: It. Just. Worked. And it has never stopped working! Without any fumbling about with settings or having to worry about ports dying or dropped connections etc. (knock on wood). This discreet little unit runs 24-7 without a hitch, and without any advanced set-up or mataintenance being needed. Exactly what one wants from an unmanaged switch! Recently I tried switching to a 2.5G switch from another brand. Theoretically this should've sped my network up tremendously, since I now have a router and multiple devices that support 2.5G ethernet... However, the new router turned out to be nothin' but trouble, and ultimately I had to put this good ol' Netgear 1G back into service instead, to keep the Internet and local services running properly for everyone in the house. This made me appreciate just how trouble-free and reliable this quiet, affordable, unassuming little switch has been all of these years. Thus this review. Hopefully Netgear's 2.5G switches are as good as this old warhorse.
...
show more
Reviewed in the United States on November 25, 2023 by Luke C
Style: 8 Port with Enhanced Features
It's an 8-port gigabit switch with all the standards, and does its job on that front. Reasonably sized, fast as far as I can tell, sturdy metal case, nice looking, just like all "Pro" Netgear switches have been for many years. What this one has that others don't are management features that you usually need to spend WAY more to get. In particular, though, you can set it up to mirror traffic from one port to another, which is absolutely critical if you want to use Wireshark or the like to sniff packets between two devices that can't run a packet sniffer. Port mirroring is not something most people need, but if you *do* then this switch does exactly what you need, it does it well, it does it in a tiny package, and it does it for hundreds of dollars less than most managed switches. The absolute perfect tool for budget network debugging or (in my case) for taking out into the field to put between two things and figure out what's not working.
...
show more
Reviewed in the United States on October 6, 2023 by M.
Style: 8 port
Works. Cheap. I wish the power cord was on the same side as the ports, but I'll survive
Reviewed in the United States on March 30, 2024 by Eric B
Style: 8 Port with Enhanced Features
PROS: - true 802.1q VLAN tagging support, at a very low price - excellent wire-speed performance, tested @ 950+Mb/s in iperf on 6 ports at once, so long as Flow Control is disabled (see below). The main chip is a Broadcom BCM53128, which seems slightly faster and more efficient than the Realtek RTL8380 used on competing switches from TP-Link and Zyxel. - very low power use, approx. 1W - 3W dependent on ports in use (~ 0.25W DC / 0.45W AC base plus 0.3W per connected 1000M port, or 0.2W per 100M port). Traffic levels seem not to affect this much, though cable length might, since it tries to use lower transmit power on short cables. The switch-matrix core runs on 1.2V, with 3.3V for I/O, both provided by efficient switchmode buck regulators (unlike some switches that use a hot-running, linear step-down from 3.3V to 1.2 or 1.8V, at < 50% efficiency). - silent operation, with no fan or coil whine. Despite the lack of a fan, mine never even gets noticeably warm. There is a reasonably sized heatsink on the main chip, and a thermal pad under the PCB, allowing the case bottom to serve as an additional heatsink. - good build quality. Just one electrolytic capacitor, which is a Nichicon (reputable Japanese brand) 220uF on the power input, over-rated at 25V when operating at 12V. Main switch chip is a Broadcom BCM53128. Case is solid metal, compromised slightly by a stick-on platic piece around the ports for labeling, which another reviewer complained about. - happily runs on the variable 12V battery bus (10.5-14.4V) from an offgrid DC power system - starts up quickly, from cold-powerdown to forwarding traffic in about 8 seconds, far faster than any "true" managed switch (Catalyst, Juniper, Procurve etc.) CONS: - management interface, whether via web or Windows app is limited and cumbersome, especially when configuring VLANs, though is most cases this is only a one-time annoyance, set-and-forget - typical of switches in this class, there's no CLI management, nor SNMP, so tracking port activity with MRTG, etc. is not possible. Omitting these probably does reduce both cost and power use, though. - The management controller, integrated within the BCM53128 is a weak CPU derived from the 1980s-vintage, 8-bit Intel 8051, which is easily overloaded. This explains the lack of HTTPS SSL support, occasional dropped HTTP requests, etc. It's actually impressive they managed to squeeze an IP stack and web interface onto such a small CPU at all. - This limited 8051 service processor would only affect management functionality (it isn't part of the main switch-fabric data path at all), except for a dumb decision on Netgear's part to configure the switch registers to send a copy of *all* HTTP (tcp port 80) traffic, originating from any port, to this tiny management CPU. This has the effect of badly crippling the layer-2 Flow-Control feature, causing any and all HTTP traffic flowing through the switch to be bottlenecked to about 10Mb/s whenever Flow Control is switched on. The reason is that flow-control rate limiting kicks in whenver any port receiving the traffic gets overloaded, the weak management CPU effectively connects to a internal 9th, on-chip port that seems to run at only 10Mb/s, AND all web traffic from anywhere to anywhere (even when bearing an 802.1q VLAN tag!) gets uncontrollably copied to the phantom port-9. This wouldn't be so bad if the web interface could be moved to a less important port than tcp/80, set to listen to requests only from one specific switch port, or disabled entirely (until next power-cycle, say, or even semi-permanently until a factory reset), but none of these options are provided. Netgear does seem to ship these switches with Flow Control turned OFF by default, masking the performance problem, and in many cases Flow Control is undesirable anyway, but it can be useful in cases where a node on your network can't keep up with full Gigabit rates, but can do better than 100M. Many low-power single board computers fall into this category and can benefit from FC. The management controller can also be a big security hole, since it doesn't respect VLAN boundaries at all, and copies of its transmissions get relayed to ALL ports, in-the-clear and untagged, regardless of VLAN membership status. The switch effectively reverts to just a dumb hub whenever the hidden Port 9 is involved. HARDWARE MOD: If you don't mind voiding your warranty with a small bit of soldering, it's thankfully possible to disable this ill-behaved web interface and completely disconnect the BCM53128's 8051 management controller from its switch fabric, eliminating its security exposure and letting Flow Control work as intended, with no more weird slowdowns affecting port 80 . Here are the steps: 1. First Get everything configured as you like in the web interface, setting up and testing all VLANs, etc. Reboot the switch and verify it comes up in the desired configuration. 2. Open the cover and find tiny surface-mount resistor R75, between the main chip and the ports, near the crystal oscillator. Desolder this resistor. See my first photo, where it's already been removed, leaving bare pads. R75, which I measured at 4.4k in-circuit, pulls BCM53128 pin 43, "EN_8051_TxRx" high, to 3.3V. It CAN just be left floating if you don't mind losing the web (and Windows-config-tool) interface permanently after initial setup. 3. If you want to be able to toggle the web interface off and on, solder a very fine-gauge wire to the removed R75 resistor's pad nearest the main chip, and another such wire to a 3.3V power pin anywhere on the board-- you could use the other side of R75, but it's easier to grab this voltage from a less closely-spaced area. I chose to use the power pin (pin 8) of U5, the 8pin serial EEPROM at upper-right. 4. drill a hole on the back panel somewhere to mount a small toggle switch. Solder one of its terminals to the R75 pin (BCM531128 pin43, EN_8051_TxRx signal) through a 3.3k-ohm resistor. Solder the other toggle switch terminal to any convenient 3.3V pin, through a 1k-ohm resistor (optional - these two resistors in series approximate the original 4.4k-ohm pullup, but anything in the ballmark should work) Note that EN_8051_TxRx is only latched during reset, so after flipping the switch you have to power-cycle the switch for it to take effect. At least this Netgear is fast to reboot, but having to do so makes its port traffic & error counters effectively useless, unless you leave management enabled all the time. If you want to add a RESET button also, solder a fine wire to the right-hand (near the coil) terminal of resistor pad R7, which should be empty to begin with. This goes to the Shutdown terminal of the 3.3V switchmode regulator, and grounding it (through a 1k-ohm resistor) even briefly will cause a clean reset via 3-pin power-supervisor chip U3. That IC actively drives the BCM53128 RESET pin both high and low, so you can't safely pull RESET down directly. Rather than mounting a physical toggle switch, since my GS108e is in a hard-to-reach spot I decided to bring out these control signals (EN_8051_TxRx, +3.3V, RESET-via-regulator-shutdown) to a 4-pin header, which plugs into GPIO outputs on a nearby router, allowing management-enable and reset functions to be controlled remotely. Anyone going this route should ensure both systems share a common logic ground, and take care to never drive either signal to more than 3.3V Documentation on the BCM5128 is hard to come by, but I very much doubt it's 5V-tolerant.
...
show more
Reviewed in the United States on August 8, 2018 by packetrat packetrat
Style: 8 port
Worked great for our small business. Only need 4-5 devices hooked up!
Reviewed in the United States on May 9, 2024 by 17 year Amazon Customer
Style: 8 port
We really enjoy the ease of use with this phone package. Nice, easy to understand.
Reviewed in the United States on May 6, 2024 by Kathy Peller