Search  for anything...
NETALLY

netAlly LRAT-1000 LinkRunner AT Copper Ethernet Network Tester

    • Based on 159 reviews
Condition: New
Checking for product changes
$1,325.53 Why this price?
Save $169.47 was $1,495.00

Buy Now, Pay Later

As low as / mo
  • – Up to 36-month term with PayTomorrow
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Monday, May 20
Order within 20 hours and 34 minutes
Available payment plans shown during checkout

Size: LRAT-1000


Pattern Name: Tester


Features

  • A handheld Ethernet tester for quick, automated verification of network connectivity and availability
  • Tests 10/100/1000 Mbps twisted pair Ethernet links
  • AutoTest accurately identifies network problems in 10 seconds
  • Features basic cable tests, Ethernet link and switch port identification, PoE, IP ping, TCP port open, 10 reports
  • Includes AA battery pack, LinkRunner Manager software

Description

The NetAlly LinkRunner AT Network Auto-Tester is the fastest way to solve network connectivity problems. This rugged, handheld network tester takes the guesswork out of troubleshooting with its complete one-button AutoTest. The AutoTest performs your required set of connectivity tests in 10 seconds, enabling you to accurately and quickly identify and solve network problems.


Is Discontinued By Manufacturer ‏ : ‎ No


Product Dimensions ‏ : ‎ 1.89 x 7.8 x 3.5 inches; 1.1 Pounds


Item model number ‏ : ‎ LRAT-1000


National Stock Number ‏ : ‎ 6625-01-624-3684


Batteries ‏ : ‎ 4 AAA batteries required. (included)


Date First Available ‏ : ‎ February 20, 2012


Manufacturer ‏ : ‎ NETSCOUT


Country of Origin ‏ : ‎ China


Domestic Shipping: Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues. International Shipping This item is not eligible for international shipping. Learn More


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Monday, May 20

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Expensive like Fluke
Size: LRAT-2000-KIT Pattern Name: Tester
Purchase had two separate choices and I thought I purchased with the fluke probe. I never use more than 1 remote. Buttons seem old fashioned but it’s much faster than the android version. Leaving the unit and link live takes some time. Pro: Time saver! Verifies a dead line (port not patched in). Getting port number in seconds without tone & probe is amazing. Let’s you see speed settings for mismatch issues. Verifies SMTP & IP internet connections in seconds. Con: I know it’s not a certifier but Cable test does not verify speed as I had hoped while testing new crimped RJ45’s. ... show more
Reviewed in the United States 🇺🇸 on February 17, 2023 by Robert P.
    • Great time saver
Size: LRAT-2000-KIT Pattern Name: Tester
I purchased this product to disagnose network issues at customer sites. I have ran every one of my cables and installed all the switches and firewalls/routers so I know mine are correct as i have tested each cable as I completed them, but at a customer site I have no idea what has or has not been done. I opened the product and started using it after the recommended 4 hour battery charge. With a basic knowledge of networks and cabling it is very easy to use and does not require much documentation (in fact I have not even reviewed the documentation outside of the basic info on charging the battery). I tested it on my DHCP network and it was able to obtain an IP and DNS along with routing out correctly and I was even able to do simple "ping" type performance tests to sites I entered into the unit. I also tested it on my non-DHCP network and after entering the IP address, subnet, gateway and DNS's it also was able to connect and route and perform the same tests. The most impressive thing to me is it can determine within a few inches the length of the ethernet cable (I use CAT5 RJ45) and even has a feature that you can determine where the cable is connected on a specific switch or hub. This is done through the included tone probe and then a nifty feature that, once you have located the cable bundle going into the switch or hub via the probe you can put the unit in a mode that flashes the Link, 10/100/1000 and on some switches the full/col light all together. This makes it very easy to determine which port the cable is connected to. You can then place the Wireview Cable ID connector(includes 6 of these in the extended kit that I purchased) on that end of the cable and then place the main unit in cable disagnose mode and it will even tell you if your pin outs from end to end or correct or which ones are dead or crossed. It also determins the connect speed of the cable/switch 10, 100 or 1000. I wish these were around 10+ years ago when I wasn running cables and crimping ends. It is pretty pricy, but with a few uses and the time savings it will more than pay for itself and considering you can do most of the basic cable, switch, routing and performance diagnostics, you can save yourself a ton of money over having a networking company come in and diagnose your issues on your network. Again you do need a basic knowledge of cabling and networks to use the product sucessfully. I would recommend this to anyone that has the basic knowledge of networks and cabling as a great time saver in diagnosing issues unless you have personally ran all of your cables and tested them when you installed them and they have never been touched, pulled on or accidentally cut at your site (like this doesn't happen regularly in the real world). Another great product from Fluke. ... show more
Reviewed in the United States 🇺🇸 on June 26, 2013 by Robert B.
    • Expensive but money well spent. No regrets buying this.
Size: LRAT-2000 Pattern Name: Tester
I had a read a bad review of this after I bought it. The review is a bit suspicious. It's a lot of money and I'm not a company. I'm a tech, yes and I think a tool like this is worth the money. I can plug in a jack and learn a lot of the network from this device. Combine something like this with a mapper and you can walk into someone else's network and start to understand things. I've always hated how in tech support you get a call to visit some desktop and you're expected to pull some rabbit out of your yahoo and figure out whatever the problem is. Why can't the user gain access to the internet? Who the heck knows. Where is this user even connected? If it's not your network, how would you know? And users and management think we all "just know". Well, this tool is a part of that. Assuming the network is made up of Cisco switches and such you can find out which VLAN and switch the user is actually connected to. You will see speed. If the wire is broken you will know where the break is. You can add tests and save the additions as a profile. So I can make a profile for home and one for the office and one for xx client and so on. Just plug in and get answers in a few seconds. Wish it were cheaper but then I guess there isn't a big audience for these kinds of things. I'm an individual and I bought it with my own money. A company should be buying these for their techs. You'll get a bit of sticker shock, but a tool like this is just makes a lot of sense. Techs can solve problems faster and be less stressed about troubleshooting a problem. That means they waste a lot less time which is good for the tech and the user waiting for resolution. I guess the buzz word is that it pays for itself. The stress factor is enough for me. I'd like to be able to easily troubleshoot connectivity. I'd like to know what's going on with the wire and what the port is. Unless you built the network yourself odd are you could use help understanding it. 5 stars. ... show more
Reviewed in the United States 🇺🇸 on July 29, 2014 by Alex Alexzander

Can't find a product?

Find it on Amazon first, then paste the link below.