-
-
-
-
-
4.0 out of 5 stars Decent Filament, Cool Surface Texture
Color: Pla-cf Red, Black, Coffee, Purple
Decided to give this stuff a try. I had heard of CF-PLA having adhesion issues. I would say it doesn't stick as good as regular PLA, but stuck well enough to print a Benchy without a brim or raft directly on my PEI Plate heated to 60 degrees. I ran a couple temp towers with it and found that it does
not like to bridge well. However, your results may vary, I tried it with a stock Tenlog TL-D3 Pro, which only has 1 sided cooling. Its possible that more cooling could benefit. I did notice it like to curl on steep overhangs, again, maybe something that could be fixed with more tweaking. I plan to keep testing different fan settings and see if I can get it fixed. If I do, I will update my review with my finding. Surface texture was great, love the matte finish. Prints felt very rigid and strong. I was able to put a lot of force on the temp tower before it snapped at a layer line. Filament itself is very brittle. It snaps very easily. I recommend using a direct drive system to help eliminate any snapping issues. This was not due to moisture as some may think. I took it directly out of the vacuum bag and started my tests. Overall, I think this is a good filament, just maybe not for the beginner with a bone stock Ender 3.
...
show more
Reviewed in the United States on June 20, 2023 by Steelheader09 Steelheader09
-
-
-
-
-
5.0 out of 5 stars iSANMATE Pla-CarbonFiber Filament is beautiful, STRONG and easy to work with!!
Color: Pla-cf Red, Black, Coffee, Purple
I love this iSANMATE Pla-CarbonFiber Filament! It printed like a dream, no clogs, smooth, and that Matte finish is beautiful!! I used PrusaSlicer's standard settings for PLA-Cf filament: Nozzle 225c/ 70c Bed. iSANMATE Pla-CarbonFiber Filament Did not clog my nozzle as did other filaments. This filame
nt stuck to the bed very very well and was perfect choice for my C-clamp print.
...
show more
Reviewed in the United States on June 9, 2023 by J. Schodrof J. Schodrof
-
-
-
-
-
5.0 out of 5 stars Fantastic filament!
Color: Pla-cf Red, Black, Coffee, Purple
I printed the wrench from Nasa.6 nozzle . 2 layer height 200°c nozzle 60°c bed. It came out very clean, I will be using more of this in the future.
Reviewed in the United States on June 6, 2023 by frost frost
-
-
-
-
-
5.0 out of 5 stars Prints very easily!
Color: Pla-cf Red, Black, Coffee, Purple
This Filament is very Cool! It's easy to work with, prints smoothly... No Clogs, Messes, or problems at all! It's Very Nice!
Reviewed in the United States on June 4, 2023 by Scott R Siegler Scott R Siegler
-
-
-
-
-
4.0 out of 5 stars Haven't tried the other rolls but Multi color is non repeating
Color: Glow Multicolor, Green, Blue and Blue-green
There are a lot of people saying they didn't get a multicolor roll. But the roll actually starts green then blue then red. So there is no way to get a color shifting print unless you use the whole roll 😂. Or at least half! But it prints well! And the green roll is Bright (I'll check back in when I've
printed with the others)
...
show more
Reviewed in the United States on May 6, 2023 by Paul Roberson
-
-
-
-
-
4.0 out of 5 stars It's okay.
Color: Glow Multicolor, Green, Blue and Blue-green
It does an okay job. I haven't gotten it to glow like the pictures, but there's always ambient light coming from somewhere. Maybe a black light.
Reviewed in the United States on May 18, 2023 by Drew
-
-
-
-
-
4.0 out of 5 stars Will not stick
Color: Glow Multicolor, Green, Blue and Blue-green
I have tried to make 5 different projects now and all have failed in some form or another. I increased the temperature of my bed, some improvement but 3/4 of the way from completion it broke away from the bed. I tried to up the temperature of the nozzle and got very bad results. At this point I think
this purchase was a total bust. Regardless of what I do I can’t get good results. Also, the glow in the dark colors are just not very bright and the “multicolor” is just green. Edit: The sales rep from the company reached out and inquired about the issues I was having. After explaining it to them they concluded I had been sent defective product and rushed me some new product. I received the replacement and also read other reviews of the products and made the required adjustments on my printer. The performance was greatly improved. The multicolor is still not very “multi” but I greatly improved my botched print rate, from 100% to about 20%, which is not horrible. I ended up increasing my table temperature by 10 degrees F and my nozzle by 5. My updated rating reflects the incredible customer service (5 stars) with my rating of the product overall (3 stars). I would buy more products from ISANMATE, just not this particular one.
...
show more
Reviewed in the United States on January 25, 2023 by Evan R. Mendoza
-
-
-
-
-
4.0 out of 5 stars Great glow, a bit tricky to setup for printing
Color: Glow Multicolor, Green, Blue and Blue-green
Forst off, everything works they way it should. 4 stars because of this being more touchy to the height that I have to set the base plate at. I use silk colors 1.75 pla and they print great with very close base plate to nozzle. This needed some extra fine tuning to get exact.
Reviewed in the United States on April 24, 2023 by Tru-Security
