iSANMATE 3D Printer Filament, PLA Filament 1.75mm Bundle, Dual Color Filament Silk PLA, Dimensional Accuracy +/- 0.03 mm, 250g x 4 Pack(Gold+Red,Red+Green, Blue+Silver, Bronze+Silver)
Condition: New
Buy Now, Pay Later
As low as
$6
/ mo
Learn more
- – 4-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
20 left in stock
Arrives
Thursday, Mar 12
Recently Viewed
Color: Gold+red,red+green,blue+silver,bronze+silver
Features
- Pla Filament Shimmering Colours- Unique colour change effect will make you get a magic model and attract everyone's attention;
- Premium PLA +- iSANMATE 3d filament without warping, clog-free, bubble-free and easy-to-use, smooth and delicate, less entanglement by machine winding, no tangling and easy to feed. with excellent layer adhesion, and easy support removal, and works perfectly with most FDM 3d printers on the market;
- Recommended Printing Conditions- The Printing Temp is 190C-220C (depending on the printer model)which is wider than typical PLA, Printing speed: 40-130mm/s. Hot bed temperature: 45 60C;
- Sealed Package- Silk filament will be dryed for 24 hours before packaging, then packed with Vacuumed Sealed. Since the PLA filament is easily damp, please store it in a resealable aluminum foil bag after opening to maintain excellent printing performance;
- Technical Solutions-Provide fast and efficient technical solutions when you have any printing problems. With 24 hours guaranteed reply.
Brand: iSANMATE
Material: Polylactic Acid
Color: Gold+red,red+green,blue+silver,bronze+silver
Item Weight: 250 Grams
Item Diameter: 1.75 Millimeters
Manufacturer: iSANMATE
Brand: iSANMATE
Item Weight: 8.8 ounces
Product Dimensions: 3.94 x 0.39 x 0.39 inches
Item model number: PLA-DC07
Color: Gold+red,red+green,blue+silver,bronze+silver
Material Type: Polylactic Acid
Number of Items: 4
Manufacturer Part Number: PLA-DC07
Date First Available: July 10, 2022
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Thursday, Mar 12
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: Glow Multicolor, Green, Blue and Blue-green
It looks good and it’s the same size as listed so you don’t need to worry about that. I made a cross to go on a necklace and if the sun touches it for a couple minutes it could glow for hours. The quality is great and is worth my money. I would recommend this product to my 3d printing friends.
Reviewed in the United States on December 28, 2025 by Allen
Color: Matte Blue+green+pink
The color is vibrant, consistent, and looks amazing on finished prints—exactly what I was hoping for. It has a smooth, rich tone that really pops, whether I'm printing small models or larger pieces. Print quality has been excellent. The filament feeds perfectly with no jams, and layer adhesion is solid. I’ve had zero issues with warping or stringing, and the surface finish is clean and professional-looking every time. It’s clear this is a high-quality filament, and it’s become my go-to for any projects that need a bright, eye-catching pink. Highly recommend for anyone who wants great results and reliable performance!
...
show more
Reviewed in the United States on June 9, 2025 by Lindsey
Color: Glow Green
Review is for the: "iSANMATE 3D Printer Filament, PLA Filament Glow in The Dark, 1.75mm Dimensional Accuracy +/- 0.03 mm, 1 kg Spool" As with most any filament from the factory... it works best when dried for 10+ hours. Many people report how brittle this filament is & yes, wet filament is brittle. So, dry it first. Then it will work well. I have had great prints with the Glow filament. After charging off a Bright light for 20 minutes, it will last for a few hours. Thicker prints works best of course, as there is more product to glow. Good detail can be printed with this. Important to have the settings correct, as the Glow is actually a PLA+ which melts at a higher temp than PLA. Appears to be a bit stronger than PLA, but not like a CF or PETG. I would purchase again. Be sure to dry it first.
...
show more
Reviewed in the United States on February 17, 2025 by Complimentary
Color: 401- Glitter Rainbow
Edit to add: This filament broke for not using in 2 days, although i have everything inside 3d printer enclosure. It definitely needs drying before using. --- I got this filament and it says it is PLA. the information on the label is different from their page on Amazon. Regardless, I could not get a good print using any information, nor using standard PLA settings. However, when I changed the settings to PETG, it printed perfectly. I have elegoo neptune 4 pro and did some bed leveling as well. Off note, the filament was dry and broke out of package. I did dry it the day prior to using for 6 hours andtreated it as PLA, but PETG drying temp and time are different from PLA. overall, it's a very nice filament and the colors are awesome. In picture two lamp models only i am missing the led lights that I am expecting next week. But those 2 came from the same filament.
...
show more
Reviewed in the United States on December 1, 2024 by Widad M. Widad M.
Color: Glow Multicolor, Green, Blue and Blue-green
Let me count the ways in which I feel ripped off. 1) As displayed in my uploaded image, the consistency of this filament is abhorrent. I am using a brand new JS1 Snapmaker and the filament has been grinding the drive gears of the extruder like a rookie truck driver. Never in all of the years I have been doing 3D prints, have I come across a filament that actually gets stuck in the Bowden tube to the point you have to yank it out backwards in an unloading scenario. The print that I am working on, was to be an 18 hour print, but it is now 26 hours because every time I walk away and do something constructive else where, it decides to get stuck and make the JS1 stop and wait for me to return to essentially, yank the filament out, and load it back in. 2) One would assume these would be a full size roll but alas, that is not the case. These are 4 mini rolls of frustration and wasted money with an odd coating that is grainy and full of friction. Luckily I had my SUNU drier and have been literally cooking the roll as I print but even so, it has jammed twice. Wonderfull, because we all know how awesome it is to have a large print stall out or quit on you when it is assumed the product you bought would be just a tad bit better on the quality side. Might as well try to 3d print log chain and see how that pans out. 3) "Glow" doesn't seem to be glowing in the colors that are pictured. In fact, all 4 of them, have the same sick green glow to them so..not sure where the variety pack is in all of this, but it is safe to say they didn't know either, grabbed whatever was laying on the floor and threw it into a box for me to suffer their lack of QC. Either way, I will not buy another product from this company as it is painfully obvious to see, their deceptive practices know no bounds. If it did not take forever to get filament from Snapmaker, I would order nothing but Snapmaker filament because it is far superior than most of what is here on Amazon, other than Hatchbox, which is now my new go to Filament company at this point. (Overture also has issues with overlaps, snags and just horrid PETG)
...
show more
Reviewed in the United States on July 10, 2023 by mike beck mike beck
Color: Gradient Yellow+green
Fantastic color change. Made a Bambu dragoon with the filament.
Reviewed in the United States on January 15, 2026 by jay
Color: Glow Blue
I bought this because I love glow in the dark things and so far so good. I’ve been working through the filament because I hate dealing with extruding new filament. I haven’t had to change any options from my normal PLA setup, so ease of use is solid…I haven’t had any printing flaws with it either, despite attempting more and more complicated prints. Looks-wise, when it’s printed and viewed in normal light the print looks like a cloudy semitransparent piece. Once the lights go out the glow is present, but since I’m sort of a cave dweller I find I need to use a black light to get the full effect. If you’re placing it in a sunny area to charge up you’ll be fine, but if you’re only under artificial light you’re going to have to let it charge quite a bit. All that said, if you want to simply give someone else or yourself a sense of awe in your projects, this is fantastic!
...
show more
Reviewed in the United States on October 20, 2025 by Karl