Manual Leather Skiver Peeler Splitter Thinning Skiving Machine Leathercraft Edging Machine for DIY Project
Condition: New
Buy Now, Pay Later
As low as
$11.66
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Wednesday, Nov 5
Recently Viewed
Features
- * Simple to use, Fully Adjustable.
- * Ability to par larger pieces of leather by running through the machine several times.
- * 27 mm roller and 3 additional interchangeable rollers (4mm, 8mm and 12mm)
- * The patented mechanism automatically makes the knife stay in the chosen position so there is no need for time consuming readjustments.
- * Leather skiver replacement blades are available.
Brand: INNETOC
Material: Leather
Color: Black
Active Surface Area: 0.108 square inches
Operation Mode: Manual
Package Dimensions : 8.62 x 8.62 x 3.98 inches; 1.98 Pounds
Item model number : SKIV-91220
Date First Available : December 20, 2019
Manufacturer : Zhejiang once international co., ltd
Best Sellers Rank: #108,174 in Arts, Crafts & Sewing (See Top 100 in Arts, Crafts & Sewing) #526 in Leathercraft Accessories
#526 in Leathercraft Accessories:
Customer Reviews: 3.1 3.1 out of 5 stars 65 ratings
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Wednesday, Nov 5
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
This CAN be a good purchase. It's, price wise, cheap. The machine itself, yeah, it's made pretty cheaply to. ONLY BUY OF YOU'RE WILLING TO SPEND ABOUT AN HOUR TUNING IT! For tuning the goal is to get rid of all the extra wobbles, wiggles, and jimmying by "correcting" for horrible tolerances. 1)Start with removing the pins that are clipped on. (Attach a small magnet next to the clip so that it doesn't go across the room or you lose it some other way. ) 2) Remove the adjuster knob. 3) Remove the screwed in inserts that holds the pin and the adjuster knob. 4) Wrap the threads of inserts with thread tape. 5) Tighten the lower insert until right and aligned so that the forks on the adjuster align properly. (Put a small screwdriver through the insert. Don't He-Man it into place, the main body of the machine is pot metal and will strip out.) 6) Place a thin washer between the top insert and the body. (This gives it a further range of motion for tilting the blade. ) Then attach the insert just like you did for the lower one. 7) Sqeeze the forks on the adjuster so that it slides onto the insert tightly. (No He-Man, remember cheap easily broken parts. And one is right hand thread and one is left. Finding a left handed threaded anything is horrible.) Align the hole of the fork with the insert. 8) Wrap the pins in a couple layers of aluminum foil. (Your shiming the pins to fit tighter.) Twist the pin on the same way the foil is wrapped, don't push it straight in. That will bunch the foil and remove it from where you need it. 9) Once the pins are in check for wobble. It you have ANY try again with the above steps. 10) Remove the horizontal Allen head bolt that is above the razor blade. Thread tape it and reinstall. Ensure no wobble at that point. 11) Remove the 2 pivot screws (horizontal allen head bolts below the spring with a stop nut on them). Thread tape and reinstall. Both pivot screws have a point and they must align with the dimple inside or out won't adjust correctly/ evenly. Do not over tighten the pivot screw or set nut. (Common theme here right....) 12) Remove the vertically mounted turn screw and add a set nut. (This isn't mandatory, however, when you use it and the adjustment slips you'll hate yourself for not having done it.) 13) If you have a bench vise use that to secure the machine into place during use vs the janky table mount bolt. 14) Don't think you need a huge angle to skive with. The small roller pin, a tight angle, and holding the material that is not being trimmed lower than the roller pin. The full roller pin is only used for skiving the piece flat instead of giving it a bevel. I've got mine tuned so that I can reliably Skive down to half a mm. Once you get it right, it's a simple machine so it shouldn't need much if any maintenence.
...
show more
Reviewed in the United States on September 18, 2024 by Amazon Customer Amazon Customer
took a little time to get use to. once i did , worked great.
Reviewed in the United States on March 16, 2024 by cowboy tack
You get what you pay for!! Yep, it was cheap and it is cheap. There was no tension bar for the lever adjustment. The "spings" look like they are nothing but hand coiled wire someone made themselves. The base attachment "plate" wasn't on and the hole drilled in it wouldn't fit over the screw for attaching it to a work stand. I had to drill and new hole and attach a locking nut and washer in order to place it in position on a workbench. You get what you pay for! Lesson learned....DON'T BUY IT!
...
show more
Reviewed in the United States on June 14, 2024 by Robert Claggett
I had been curious about this type of leather skiver for quite a while. When I received it I started setting it up by clamping it to my bench. While getting ready to test it out the lever arm used to raise and lower the blade came off. There wasn't that much force required to move the lever arm and I assumed that the level arm screwed in and had just backed out in shipping. I picked it up and realized that it wasn't threaded and instead it was just a press fitted rod that went into a hole on the skiver. The only problem was the hole was only maybe and 1/8th of an inch deep and the rod was rounded on both ends so there was even less material for rod to hold on to. As there was no way for me to fix this easily I returned it for a refund. I don't know how well it would actually work because I never got a chance to use it. I seemed solid, but there seems to a lack of quality control.
...
show more
Reviewed in the United States on November 4, 2024 by Creighton
Hard to adjust as everything seems to be loose when it arrived. After following some tips from a YouTube video, I was able to make it work but had to re tighten after a few uses. When working with tooling veg tan, it left marks on the leather which in my case made the leather useless. Handle broke off after a month. I trashed it.
...
show more
Reviewed in the United States on January 3, 2024 by christopher
4-5 oz leather resulted in the attached photo. Very variable in depth and angle, resulting in a poor quality skive - perhaps with practice, or changing to a different blade, that will change, but, I cannot rely on it for any high end work right now. 10-12 oz leather behaved a little better, but takes multiple passes to skive down, though usually with pretty solid results. It clamps securely to my table, is easily adjustable, and it does skive leather edges.
...
show more
Reviewed in the United States on July 11, 2023 by Justin Williams Justin Williams
Although good / strong / quality material, it failed / broke within a month (30days) of use.
Reviewed in the United States on November 13, 2023 by Julian
mine came with the lift lever disconnected, I have the tools to drill the hole deeper and press the handle back in, so no big deal, unless you can't do that type of repair. After watching online instructions and recommendations I started to try to use it. Many many many tries, different settings, different materials different blades, I threw in the towel and decided I would learn to skive by hand until it would be worthwhile to invest in a better machine.
...
show more
Reviewed in the United States on January 23, 2024 by Wrenchforhire