ECOTRIC Stubby Front Bumper With Fog Light Housing for 2007-2018 Jeep Wrangler JK

Features

• With a stubby bumper design and sleek approach angles this bumper is an excellent complement to any level Jeep build.
• HIGH QUALITY MATERIAL: Manufactured from durable 5/32" steel sheet and 2 3/8" x .120 wall steel tubing. Including High Strength 2x D-Ring Mounts. Built-In Winch Plate for Up to 12,000lb Winch and Built-In OE Replacement Fog Light Housing.Textured black powder coat finish for corrosion protection and durability.
• Fitment:For 2007-2018 Jeep Wrangler JK all models
• Package Include: 1 X Front Bumper, 2 X 4.75ton D-ring isolator for free, Including all needed hardware as shown in pic.
• Note: Easy, Bolt-on Installation, No drilling or cutting required.

Description

1.American headquarters, American design, overseas processing and multipoint warehouse in the United States. 2.All the items will be sent in one business day. For most areas, we can deliver within 2-8 days.Provide technical support at any time. Stubby Bumper offer an rugged appearance and maximum tire clearance Manufactured from 5/32" Steel Sheet and 2 3/8*0.120" tube Two Stage durable Textured Black Powder Coat Finish High Strength 2x 4.75'' D-Ring Mounts Included Built-In Winch Plate for Up to 12,000lb Winch Built-In OE Replacement Fog Light Housing Two Tabs on Pre-Runner Hoop For extra lights Easy&quick installation, No drilling or cutting required The company keeps living up to the belief of :''honest selling,best quality,people-orientation and benefits to customers.'' We will be responsible all the way to the end once you meet the problems during using.

Manufacturer ECOTRIC

Brand ECOTRIC

Item model number CA-112

Exterior Painted

Manufacturer Part Number CA-112

ASIN B07GZRT1ZH

Customer Reviews 4.5 out of 5 stars 42 ratings 4.5 out of 5 stars

Best Sellers Rank #24,965 in Automotive (See Top 100 in Automotive) #28 in Automotive Bumpers

Date First Available June 17, 2019

abunda_amazon_reviews It was packaged with better quality than way more expensive items I’ve bought. It had two scratches on the corner and didn’t come with a few necessities is the reason for the 4 star review. I can understand not having some nuts and screws and things for the price point, but being scratched was pretty unacceptable no matter what you pay for something. Anyways, as another reviewer stated... “Had to purchase 8 metric M12 1.75 pitch nuts to fit” that is 100% correct. And I thank them for listing the size needed. So I will add that to my review also. That is for the 8 bolts that connect the bumper.... there are no nuts to hold it on. So you’ll need to purchase that before beginning. Unless you wanna have to make a trip to the hardware store in the middle of your project like we did. Also, there are not screws to connect the fog lights. You’ll need 8 of those with washer and nuts as well. All in all, it was easy to install. I’m a girl and it wasn’t too heavy for me. You will need to mount the fog lights and bar on BEFORE attaching the bumper. We thought enough ahead to add the fog lights before, but we didn’t think about the bar until after we attached it. Thank God for small girly hands and patience tho. I don’t recommend anyone trying it lol. It was a sincere miracle I got my hands in there with washers, nuts, and tools lol. Anyways, sorry for side ways pics. No clue why they loaded that way, but there is before and after pics. Pretty good buy. If it gets rusty or has issues, I’ll come back and update my review.;;Reviewed in the United States on June 15, 2020;;4.0 out of 5 stars;;You’ll need to know a few things.;;Sarah;;;Didn’t come with the nuts for the eight bolts they hold the bumper on. Had to go to hardware store and get the nuts on one bumper do not match. Had to purchase 8 metric M12 1.75 pitch nuts to fit. Also doesn’t come with hardware to install the fog light housings had to buy them also 8 stainless steel screws washers spring washers and nuts also there is nowhere for license plate especially if you plan on mounting a wench which didn’t so had to improvise a license plate mount other than that very pleased with bumper definitely need two people fairly heavy after you install the push bar and fog lights BEFORE mounting the bumper or you will never get the fog lights and push bar indtalled.;;Reviewed in the United States on March 7, 2020;;5.0 out of 5 stars;;Price is right install everything on the bumper before mounting the bumper.;;mamabear 3;;;This bumper is honestly the most inexpensive bumper I could find, probably cheaper than just a winch plate. For that alone, it is a tremendous value. It feels stout, I like the style, and there's no gaudy branding cut into it (I'm looking at you EAG). The hoop is a fat tube, and looks meaty (even though it's only attached via 8 small bolts). Cons... One of the d-ring mounts was welded crooked, so it looks kinda wonky, but with the shackle on it, it's not too noticable. The light tabs are a bit deep and low on the bar, so I'm unable to aim my Hella 500's down enough; I can probably correct with about a half inch stack of washers. I do wish there were some holes drilled into the tube to route wires, but I can punch my own. The package was pretty bad.. It was basically wrapped in felt and a 1/8" thick foam blanket, then cardboard wrapped around it (no airspace or cushioning). Amazingly, nothing was bashed in from shipping, but there were a couple (very minor) dents and scratched off paint on either side of where the winch mounts. No biggie, a dab of bed liner will hide it I'm sure. It doesn't come with nuts for the main mounting bolts, and I'm not sure if the factory nuts are compatible, but I ordered some from Amazon anyway (not here yet). But overall, I couldn't be happier with the value and appearance. I'm going to attempt to install onto a 2019 Wangler (JL), as rumor has it, JK bumpers are compatible. Will update when Amazon delivers the rest of my order. Edit: It fits JL Wranglers, no problem. There's maybe 1/2" gap between the bumper and the grille at the closest, so, no rubbing, looks like it was meant to be there. My Sport plastic bumper halogen fogs are the three-tab style, and this bumper takes the four tab style, so I had to drill a couple holes in the fogs to use them, but it worked out in the end. You'll need your own bolts to mount them. Hopefully there's no rubbing when the winch shows up.;;Reviewed in the United States on July 16, 2020;;4.0 out of 5 stars;;Amazing value for a pretty nice bumper.;;Dave Price;;;Came packed very nicely and even with apparent rough handling during shipping was damage and scratch free. Very easy install, but you will need the following items: - 8 x M12 1.75 pitch nuts (the bolts do not come with nuts to secure them and the stock ones do not fit) - 8 x 8/32 bolts (1/2” length is fine), washers and nuts for the fog lights. There isn’t any hardware for the fog lights and the stock screws will not work) Other things to know: - The stock bolts/nuts are 18mm and you do not need deep well sockets to get them off - The provided bolts and the M12 nuts you need to buy are 19mm. You WILL need a deep well socket or use a crescent wrench or 19mm box end for the nuts as the bolts are pretty long. - Make sure to put fog lights in and attach bar prior to attaching bumper. Install was very straight forward and can easily be done with one person.;;Reviewed in the United States on August 9, 2020;;4.0 out of 5 stars;;Great Value - Need some Hardware though;;Glen;;;great well made bumper. price was amazing! delivery was faster than prime!;;Reviewed in the United States on October 30, 2019;;4.0 out of 5 stars;;bump;;Kwalsh;;;-Arrived packed VERY well but still had just a couple of small spots that had rubbed -Mount your fog lights before installing! -I did install a winch but haven't used it yet. seems the winch mount could be thicker but i'm not an engineer. I will update if it rips off lol. -I replaced the hardware with grade 8 nuts and bolts. Again not an engineer but wanted heavy duty hardware holding this thing on. -VERY pleased with the value.;;Reviewed in the United States on August 27, 2020;;4.0 out of 5 stars;;Great budget friendly bumper;;Amazon Customer;;;Package arrived two boxes cut and taped together all beat up. The bumper is VERY THIN! I bet the first time I use my winch it will be twisted scrap metal. I’d say less then 1/16”. Didn’t come with any of the mounting hardware so be ready to go to the hardware store. Welds are trash. Will be keeping it for now just to see how long it will really hold it. I wouldn’t buy again.;;Reviewed in the United States on June 28, 2020;;3.0 out of 5 stars;;Very thin;;Zack;;;Pretty heavy but received with some very noticeable scratches directly in the front. Great value for the money but wasn’t expecting to have to powder coated since other people don’t handle customers packages with care. I’m sure it wasn’t shipped this way. Other then that looks pretty durable;;Reviewed in the United States on July 25, 2020;;3.0 out of 5 stars;;Durable best value. Usps doesn’t handle with care clearly. Cost me more money!;;corey and sam