Search  for anything...
INCRA

INCRA MITEREXPRESS Miter Express

  • Based on 223 reviews
Condition: New
Checking for the best price...
$195.48 Why this price?

Buy Now, Pay Later

As low as $32.58 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout.

Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Tuesday, Sep 2
Order within 3 hours and 9 minutes
Available payment plans shown during checkout

Recently Viewed

Features

  • If you own a miter gauge - any miter gauge
  • This sled is a sliding, miter-cutting platform that fully supports and controls your work piece throughout the cut
  • Miter gauges drag your board across the table, a sled slides the work piece giving more support and control creating better, more consistent cuts

Description

If You Own A Miter Gauge - Any Miter Gauge - You Can Turn It Into A Performance Boosting Miter Sled In Just A Few Seconds By Simply Docking It In Place On Top Of This Unique Sled. This Sled Is A Sliding, Miter- Cutting Platform That Fully Supports And Controls Your Work piece Throughout The Cut. Miter Gauges Drag Your Board Across The Table, A Sled Slides The Work piece Giving More Support And Control Creating Better, More Consistent Cuts. The Miter Express Is Designed To Let You Instantly Drop And Lock Your Miter Gauge Into The Sliding Platform. Once Docked, It Stays Put Until You Undock It To Switch Back To Your Regular Miter Gauge. The Sled Features A Built In Miter Bar That Is Adjustable For Zero Side Play Tracking, So Even If Your Old Miter Gauge Is Loose In The Miter Slot It Becomes Rock Solid Once Its Locked Into The Express. Other Features Include Two Embedded T-Tracks To Secure The Included Hold Down Clamp To Anchor Your Work piece, A Locking Drop Panel That Supports The Offcut, And Also Provides Zero Clearance Tear Out Control. Note: Miter Gauge Shown In Photo Available Separately., Upgrade Any Miter Gauge To A Miter Sled In Seconds. , Doubles Any Miter Gauge's Crosscut Range Up To 24" , Safely Handles Both Extra Large And Extra Small Work pieces. , Eliminates All Side Play Between Table Saw's Miter Slot And Any Miter Gauge. From the Manufacturer INCRA's Miter Express offers any miter gauge owner the safest and most accurate cross-cutting and mitering platform available. Just add your favorite miter gauge to double your crosscut capacity up to 24". The Express features two embedded T-Slot channels to secure the included Hold Down Clamp and Outboard Fence Support. These slots are also invaluable for mounting your own custom Jigs and Fixtures. You can Dock & Lock Any Brand of Miter Gauge in Seconds. Removing your gauge is just as easy - simply release three locking screws and lift your gauge out cleanly. There is absolutely no modification required to your miter gauge for this speedy lock and release feature. The Miter Express features removable front and rear T-Slot Retaining Clips for sled stability at both the beginning and end of long crosscuts. The miter bar is conveniently adjustable from above for a perfect fit in standard miter gauge slots measuring 3/4" wide x 3/8" deep. The miter bar's adjustment range accommodates actual slot widths of 0.740" to 0.760" to guarantee a perfect fit in your table saw's miter slot.

Material: Metal


Brand: INCRA


Product Dimensions: 14"L x 2"W


UPC:


Global Trade Identification Number: 10


Manufacturer: ‎Incra


Part Number: ‎MITEREXPRESS


Item Weight: ‎10.83 pounds


Product Dimensions: ‎14 x 2 x 25.4 inches


Item model number: ‎MITEREXPRESS


Is Discontinued By Manufacturer: ‎No


Material: ‎Metal


Item Package Quantity: ‎1


Measurement System: ‎Inch


Certification: ‎certified frustration-free


Batteries Included?: ‎No


Batteries Required?: ‎No


Warranty Description: ‎No


Date First Available: December 1, 2006


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Tuesday, Sep 2

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Another Excellent INCRA Product
My initial impression of the INCRA MiterExpress was that it appeared to be another excellent example of INCRA's engineering prowess. The INCRA MiterExpress box arrived in perfect condition. I unboxed and arrayed the parts; everything was present and accounted for. The included instructions were well written and easy to follow, allowing me to complete the construction in under 20 minutes. The copious diagrams were illustrative and very helpful. The INCRA MiterExpress fits in my Bosch 4100-09 10-Inch Worksite Table Saw with Gravity-Rise Stand, except for the T-slot retainers. Even when installed properly (with the raised rim facing up and the Phillips pan head screw snugged up all the way) the T-slot retainers (one fore and one aft) impacts the bottom edge of the table saw T-slot when sliding in either direction. It appears as if the notch that has been cut into the bottom of the Utility plate needs to be cut an additional 1/32" deeper to allow the T-slot retainer to clear the table saw. For the moment I have detached both T-slot retainers and screws, and I will see if I can Dremel both notches a wee bit more. Once the parts were assembled and the "drop panel" was cut and fitted according to the instructions, the INCRA MiterExpress glided easily with no binding or side-to-side play. Note that due to how the Bosch 4100-09 is laid out, you only end up cutting about 1/8" of the drop panel off before everything fits, so you lose very little surface area. On the Bosch 4100-09, the sled overhangs the left side of the table by about three inches, and is about four inches short of the right edge of the table; kind of odd looking, but completely functional. The INCRA MiterExpress sled does not make contact with the optional Bosch TS1002 Table Saw Rear Outfeed Support Extension or the Bosch TS1003 Table Saw Left Side Support Extension, but it does render the Bosch TS1003 Left Side Support Extension useless due to the fact that the sled surface is now about 1/2" higher than the height of the support. My INCRA Miter1000/HD Miter Gauge mated perfectly with the INCRA MiterExpress, as was expected, although I did have to remove the T-slot T-clip and screw in order to seat the miter gauge in the receiver slot. I must confess that I purchased two Rockler Deluxe Hold Down Clamp to use in conjunction with the INCRA MiterExpress. My perception is that the rubber-coated tips on the Rockler clamps will have a better grip on the stock and potentially be less prone to marring the surface of the stock; time will tell if this perception holds true. I will also use a shim (those Home Depot paint stir sticks have come in handy for so many other purposes other than stirring paint) :) underneath the ends of the hold-down clamps to test the holding strength under those conditions. I will use both the single supplied hold down clamp and the Rockler clamps side-by-side and update this review with my findings. Note that you will have to replace the 5/16"x18 T-bolt and knob with a 1/4"x20 bolt and knob in order to fit the narrower T-track installed on the INCRA MiterExpress. UPDATE: After conducting tests using a 1/2"x4"x60" S4S redwood board, the INCRA hold down did indeed mar the board a bit due to the weight of the section of the board which overhung the sled. The Rockler Deluxe Hold Down Clamps with their rubber-coated ends did not mar an identical board. A nice feature is the included Outboard Fence Support. This provides extra backing to the cross-cut fence where, when cutting long stock, you may experience slight flexing of the fence. Also included were an additional two tri-lobe knobs and bolts, making a total of four knob/bolt sets, despite the fact that you only need a maximum of two knob/bolt sets for the Outboard Fence Support. It would be nice if the drop panel moved _with_ the sled; I am going to experiment with engineering some sort of removable bridge. Another nice feature would be some sort of right or left-side extension to allow for longer stock (such as wider panels and UHMW strips). In short, I am pleased with my purchase. The INCRA MiterExpress sled is another fine example of INCRA's engineering, but there is some room for improvement/enhancements. ... show more
Reviewed in the United States on October 13, 2014 by K. Miller
    • Works Very Well
Very well designed and accurate. I was able to cut pieces for both 5 and 6 star decorative wood projects. easy to use and well made. Perfect accessory for my Saw Stop.
Reviewed in the United States on May 29, 2025 by Amazon Customer
    • A great addition with some issues
I have a Dewalt 7491rs, which I feel is an amazing saw. I had purchased the Incra 1000SE Miter Gauge, which was a huge upgrade. The miter runner was super adjustable and fit the slot perfectly. The Miter Express appealed to me in part since I could use all the parts together. While I don't regret the purchase, the miter runner with the express doesn't work well with the saw. The runner doesn't expand enough to eliminate the slop in the track. Also, the 1000SE Miter Gauge has a t-track adapter that screws onto the end of the runner, which cannot be used if you are using the Miter Express. Even with these limitations, the Miter Express is really useful. I purchased an extra miter runner ( the same used on the 1000SE), and I plan on swapping out the one that came with the Miter Express. ... show more
Reviewed in the United States on April 14, 2023 by Perry Savino
    • Perfect
Couldn’t be happier.
Reviewed in the United States on May 2, 2025 by Michael j.
    • Versatile; clever improvements in safety, stability, accuracy
The Incra Miter Express offers a great combination of features and accessories that improve my table saw's safety, accuracy/repeatability, and stability. The parts that make up the Miter Express are well-designed and fabricated, and the accompanying instructions are excellent. Read them through before you start assembling! It creates a zero clearance sled that works at all miter angles for a given blade thickness and bevel angle. I've assembled one for the typical 90 degree crosscut with my Daiblo D1050T blade, and another set for my most typical dado cut. The latter used another "MERPANEL" (the drop panel that is cut to size during assembly), 18" Miter Slider (attached to the drop panel and locked into the miter slot) and UHMW tape under the sliding portion. I would suggest that Incra provide a kit of those parts, and they come close on their website. On my small job site-sized Dewalt 7480, the Miter Express significantly expands the width of board that can be cut, adds clamping capability that moves with the part being sawn, and keeps my hands farther from the blade. As Incra notes, it can be used with any miter gauge or fence. My Woodhaven 4911 miter gauge and Peachtree extension fence (both reviewed on their respective pages) seem like they were designed for it. The combination worked wonderfully, with the addition of an external PortaMate support, recently doing relief cutouts on long 2x4's as part of a fence project. I haven't yet had the opportunity to experience the small part capability, but the inclusion of the Incra clamp using the T-slots built into the Miter Express will clearly work well. The kit includes useful details: a long-ended allen wrench to reach recessed screws in the drop panel (needed to lock down that panel in operation), fence support bracket, an array of knobs and fasteners, adapters for saws with miter T-slots, and the afore-mentioned clamp. ... show more
Reviewed in the United States on November 1, 2015 by Amazon Customer

Can't find a product?

Find it on Amazon first, then paste the link below.
Checking for best price...