GMSLuu Mist Maker Fogger, 10 Head Ultrasonic Mist Fogger, Water Fountain Pond Fog Machine with Power Supply, Stainless Steel Ultrasonic Fogger Humidifier 6kg/h

Features

• 10-Head Mist Maker- Comes with 10pcs spray unit, this ultrasonic fogger comes out fog fast and brings a huge amount of mist to create a magical atmosphere. This product uses high thermal conductivity, high corrosion resistance, good mechanical strength of the metal shell, reducing the temperature difference between the water inside the host, thereby prolonging the life of the product.
• Ultrasonic Frequencies- This 10-head mist maker humidifier utilizes electrical oscillation at ultrasonic frequencies to create the mist and water spray. This oscillation also produces negative ions, which help to freshen the air and the mist will add humidity to a room. There boot delay circuit, to avoid a power surge current excessive damage to the line.
• Waterproof & Security- The pond fogger is waterproof with over-current/heating protection and the length of the power adapter cable is long enough. Automatic induction off water protection. Without worry about the potential danger for secure use. A single sprinkler line using an independent design, and the use of over-current protection circuit, avoiding the burning of a nozzle damaged power lines, and does not affect the normal operation of other jets.
• Wide Application- The power for a wide range of mist maker to ensure that the changes in the city still under normal use larger occasions. This 10-head ultrasonic mist maker can be used in many horticultural applications. Like propagation, foliar feeding, grow room and greenhouse humidity generation, etc. You can put the fountain atomizer in your pond, rockery, fish tank, vase, tank, etc.

Description

ParameterPower supply:110VWorking Voltage:DC 48VWorking Current:5.3APower: 360WOutput power:300WSpray volume: 6KG / HCooling model :Air-cooledShell Material: 304 stainless steel shell, shell polished surface treatment CautionWhen the atomizer work, please do not put your hand over the top of the atomizer spray chamber to prevent ultrasonic wounded.Nebulizer must be working in the water in order, before using the water and then put it in its power, and to ensure that there is water in a spray film surface state, in order to avoid damage to the nebulizer.When you stop using the nebulizer before disconnect the power, then remove from the water atomizer.When using the nebulizer, please use the output power of more than 250W, the output voltage is DC45 ± 5V supply.When generating a plurality of atomizer is set using the same container, each with a separate power supply need not connect a plurality of the nebulizer for use with a single power supply, and note the respective atomizer are mutually conductive housing, in order to prevent the work galvanic corrosion.Mist generated by the nebulizer must use fan forced discharge, and each group of nebulizer reserved 350CM2 of flat space, the water temperature is too high to avoid shortening the life of the nebulizer.Nebulizer not suitable for corrosive liquid atomization, to avoid damage to the atomizer and atomized metal sheet.Do not damaged during installation level sensor switch, switch failure caused the water level to prevent runaway nebulizer. Level switch should stop after the damage, otherwise there will be further damaged dry atomized piece atomizer. Do not put the power in a damp place, do not put the power into the water, or will lead to short circuit, burn the product

Product Dimensions: 9.96 x 3.58 x 1.38 inches

Manufacturer: Aquarium Air Humidifier

Country of Origin: China

Item model number: Ultrasonic Mist Fogger