ECO-WORTHY Solar Ground Mount Adjustable Solar Panel Mounting Brackets System for 5pcs 400W/6pcs 300W/8pcs 200W Solar Panels, Ideal for Large - Scale Installations,Sites,Sheds and Farms Ground Mount
Condition: New
Buy Now, Pay Later
As low as
$50.00
/ mo
Learn more
- – 6-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Zip, Apple Pay, and Google Pay. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
This item is eligible for return within 30 days of receipt
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Sep 1 – Sep 5
Recently Viewed
Size: 5pcs Large Module Version
Features
- [ Strong Adaptability ] ECO-WORTHY Mounting Bracket is 236"Lx39"W In. the front and rear pillars are 5.9 in higher, the front column is 13.78 in, and the rear column is 28.53 in,Which can better support 5*400W large Solar Panels.Suitable for home, farms, cabin and off-grid
- [ Upgraded stability ] When installing the bracket, make sure the spacing between parallel vertical columns is 59 in, and add 3 support rods in the middle of the columns,also cement blocks as the base The powerful multi-triangular structure ensures the stability of the bracket while enhancing the load-bearing performance. It can support 330 lbs without sagging or denting
- [ 30% efficiency improvement ] ECO-WORTHY bracket system features adjustable hole positions and mark scales.It can be adjusted to seven preset angles (30 to 60),Which allows the solar panel to effectively absorb sunlight and make full use of the sun's resources
- [ 15 years Durability ] Upgraded Galvanized Steel construction, endure harsh weather conditions .You can put battery, controller, inverter at backside of the mounting system. It can save lots of room and use solar power system easier
- [ DIY Endless Expansion ] ECO-WORTHY brackets system offers professional DIY solutions.You can connect two sets of brackets into a group through accessory package. Each joint can hold an additional 400W panel Creating a customized solar array that grows with your energy needs
- [ Package List ] Please note that the the parcel is divided into two bracket packages and one accessory package. If you receive the item before the other package, kindly await the arrival of the remaining item
Color: Silver
Brand: ECO-WORTHY
Material: Alloy Steel
Item dimensions L x W x H: 236.22 x 39.37 x 29.53 inches
Manufacturer: ECO-WORTHY
Brand Name: ECO-WORTHY
Model Number: L03SPBZJYCK-1
Manufacturer: ECO-WORTHY
UPC: 810127138094
Set Name: 5-8pcs Bracket System
Included Components: Blade Wrench
Item Dimensions: 236.22 x 39.37 x 29.53 inches
Material Type: Alloy Steel
Color: Silver
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Sep 1 – Sep 5
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- Zip Pay in 4
- Financing through Apple Pay
- Financing through Google Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Size: 1-4 Panels
Update 11/26/22: today I received a package with the missing parts from the seller. Exactly the most important parts that were missing arrived complete. I cut the zip ties and installed the panel clamps. The panels are now very well secured. Thanks to the great cooperation with the seller, these panels mounts are complete, and I now find them to be a 5 star product. They really are great panel mounts, a terrific value for the price and I highly recommend them. Original review: I bought three of these, and I find them to be great except for one thing, they have hardware missing. In everyone of the three boxes there was hardware missing. The missing bolts, washers and channel nuts are easily available at my local hardware store, and I bought enough to finish the assembly which was fairly easy. However, the end and mid panel clamps are not so easy to get, and are pretty unique to these mounts. I did reach out to the seller, and they said that they are sending the clamps, but they are coming from overseas (probably China) and it could take a long while. We are creeping into winter here and I cannot wait. I went ahead and used other bolts where I could, and used zip ties where they were missing, I just used white heavy duty zip ties to hold the panels in place until spring next year. One box had the whole bag of end and mid clamps missing. The others were missing the stainless steel clamp bolts and channel nuts. I used hex head bolts and my own channel nuts temporarily. I will be honest, these mounts are not bad, but beware that parts and hardware may be missing. If it is only the bolts and nuts, just buy them, they are inexpensive and easy to get. If you buy everything to build these from channel struts and hardware, they will cost much more. That is what makes these worth buying. These are stabile, sturdy and very versatile. As you can see I bolted them to deck blocks which allows me to move them if I need to. Yet they are heavy enough to keep them secure to the ground. These mounts can easily hold 5 of my 100 watt panels each, but I had to configure for 12 panels. Hence 3 mounts. I just cut off the ends to butt them up against each other. I can recommend these mounts for their versatility and great value. You can easily mount panels up to 250 watts, maybe more. Just be prepared to deal with missing hardware. If you get the mounts complete, you are getting a great deal. I give them 3 stars because of the missing hardware and the pain in the behind for the missing hardware.
...
show more
Reviewed in the United States on November 21, 2022 Reviewed in the United States on November 21, 2022 by Repro63
Size: 5pcs Large Module Version
Even though this is a "Ground Mount" system I was able to build a wooden structure and mount it on a flat roof. This is a strong well thought out mounting rack. I was able to fit 4 JJN 400watt bi-facial panels on it with room for one more panel in the future. Easy to setup and easy to secure panels to it.
...
show more
Reviewed in the United States on April 2, 2026 Reviewed in the United States on April 2, 2026 by D.
Size: 1-4 Panels
I understand that there are two versions of this product, an old one and a new updated version. I have the new updated version. It still has problems. I've tried both Renogy and HQST brand 200 watt panels on this mounting system and the rails are about 6 inches too short to fit four panels of either brand. Also, these units cannot be free standing. They have to be bolted to something solid or the legs will just collapse because there is only a single bolt for the elbow pieces making them function like hinges that swing both directions. There is no amount of tightening that will make them hold the weight of 3 panels on the system (because it's 6 inches too short to hold the four as advertised). This wouldn't be a huge issue because it should be bolted to something anyway for winds but it also means that you can't change the tilt angle with the seasons unless you unbolt the mounts from the concrete slab or whatever it's anchored to and move the legs to the new location necessary to change the tilt and rebolt them. Even if you wanted to do this, you'd have to remove ALL the panels first, unbolt and partially disassemble the mounting racks to move them to the new inclination, put everything back together, drill new holes and install new anchors because with a new angle the legs are going to be in different locations, rebolt it to the ground, and then reinstall your panels. It would take hours. A lot of people install their panels on the ground instead of their roof so they can easily change the angle of the panels for winter / summer sun, but that's just not practical with this setup because it takes almost an entire disassembly and reassembly, it's simply not designed to change the tilt angle once it's assembled. I think advertising them as "adjustable" is a stretch, for all intents and purposes they are only "adjustable" for the initial installation. The description said the angle goes as low as 30 degrees, it actually goes to 28.5 if this matters to anybody. 20 degrees is actually better for my latitude so 28.5 is better. I contacted Eco-Worthy and asked if they have any rail extensions or some other solution so I don't have to send all four back, they responded with a couple of helpful options to make it work. I work with galvanized material a lot and the galvanization on these steel components looks weak to me. It looks like a thin spray of a zinc based paint. Only time will tell what the rust resistance really is. We get a lot of rain here so I would find out pretty quick. Lastly, the included instructions aren't entirely accurate. The book lists steps that aren't required because some of the pieces that show as not being assembled actually are. If you're good at reading ahead and visualizing the assembly this is actually a good thing, because it saves some aggravating steps, but if you're the type that needs to follow the exact recipe of instructions in exactly the order described you may struggle a bit. To summarize: this mounting system does not hold four 200 watt panels without modification, it is not adjustable after installation, the instructions aren't exactly correct, and the galvanization looks weak. However, this is priced as a budget item and it lives up to that expectation, and is a solid performer for this price range. Had it cost more my expectations would have been higher.
...
show more
Reviewed in the United States on April 2, 2026 by My Eyes Are Up Here!
Size: 1-4 Panels
This rack isn't top quality but it does the job, and cheaply. Assembly was a bit challenging without a second pair of hands to help. I was surprised that the legs weren't firmly fixed to the rest of the rack but instead pivot in their brackets. This makes the rack very rickety until you can affix the feet to something. Once installed, though, it did its job well.
...
show more
Reviewed in the United States on October 6, 2024 by Bethany Jearlyn Blakely
Size: 1-4 Panels
So I knew I didn't want the tilting mechanism part of this set up. I wanted to find a way to make it work without it. And I did! Didn't need to buy anything or cut any new holes to make it work. I put the bar onto the legs and used a thick bolt (had extra since I didn't use the tilting part) to hold the strut channel in place. This thing is solid! Not hard to install but I suggest looking up the tutorial video for a quicker install. Not sure why the strut channel sticks out so I'm just gonna cut it off! Worth the money instead of buying my own strut channel and making my own set up. Would have to measure, cut, risk messing up, and constantly going back to the store. 10/10 great product
...
show more
Reviewed in the United States on September 24, 2024 Reviewed in the United States on September 24, 2024 by Sam Davis
Size: 1-4 Panels
This is absolutely an adequate product for a small array in a low wind area. This was engineered to be cost effective and ship easily. It is not a quality item. The metal is thin, the fasteners are cheap and for me has required some reinforcement to survive a windstorm. But I spent $100 on two 10' pieces of unistrut and $15 for better fasteners and clamps. I used the original horizontal bars as diagonal bracing. I think this is about the cheapest option out there for a ground mount but you get what you pay for and it did not hold up well for me in high winds. It is probably adequate for many situations.
...
show more
Reviewed in the United States on April 30, 2026 Reviewed in the United States on April 30, 2026 by gavin
Size: 1-4 Panels
Eco-Worthy makes these for 1-4 (118") and 5-10 panels (236"). The designs are the same and units are modular, with the galvanized steel angle sections 100cm each along with splice sections and associated hardware - value is high considering all the parts included - it would cost a good bit more to buy all the hardware a la carte, and some of it may be hard to find. But I wanted a stand in between the two sizes offered - specifically a little larger than the smaller 10' stand for 5x Callsun 200w bifacial panels, which are 30.3" each meaning it could only accommodate three panels as sold. So, I bought (4) of these ECO-WORTHY stands, two on Amazon during the $118 sale, and another two on Ebay where they are cheaper at $95 with a 20% coupon), so $426 for all, plus tax. Plan is two make two stands from the four, each one with 100cm more length, along with installation of two extra verticals with their front and rear leg supports at the edges. This will accommodate a 2P5S arrangement = 2000w @ 123.74v operating @ 16.86 amps, VOC for 5S = 136.5v. Total space needed 3938mm with custom stand accommodating 4000mm instead of the 3000mm as sold. I'm currently using an Oupes Mega 2 w/ (2) B2 batteries, each unit has 140v @ 15 amps MPPT, with 150v maximum, so the system can accept up to 6300 watts per hour (2100 watts per unit). I should be able to get 1856 watts with this configuration, excluding minor voltage drop from the 100' extension cable. I will probably upgrade to a Pecron F5000LFP later this year and may add another couple 2P5S arrays. Anyway mainly posting this review so others realize these stands offer great value - particularly at the Ebay price of $95 w/ coupon - and if you mechanically inclined you do not need to limit yourself to the offered 10' or 20' width, if willing to buy extra stands to harvest parts. Also worth mentioning the Callsun 200w panels are fantastic, can buy them directly from their website for the best price (same price as amazon with free shipping, but they do not collect sales tax).
...
show more
Reviewed in the United States on March 14, 2026 by ekovalsky
Size: 1-4 Panels
I have the Ecoflow 220W biracial solar panels and I got this mount for my shed roof. The company must have listened to the complaints about the instructions, because they come with a multi-page color instruction with pictures. All the parts are bagged and labeled. Since my panels are thinner than normal rigid panels I need to ‘secure’ them to the rails on the bottom and top, so I had to do the following change: I installed the horizontal mount at the bottom of the rails and not at the ‘red line’. This allowed me the required 32” vertically where I could mount the top rail. Also, since the panels are only 72”, I put a third horizontal support with the extra pieces that I had. The instructions said to install them where you are going to install them, but I didn’t want to work in the full sun putting it together, so I put it together in my garage. It was easy for two people to lift it onto my one story shed. Finally, the bolts that they include to secure the support are concrete bolts. I ended up going to Home Depot and buying some galvanized Hex Bolts 3/8” x 5” (HD SKU 213058) to which I could use the supplied nuts. Now that it is installed – solid and functional – recommend!
...
show more
Reviewed in the United States on September 14, 2023 Reviewed in the United States on September 14, 2023 by Amazon Customer