DC HOUSE 52cc 1800W Gas Powered Earth Auger EPA Certified Post Hole Digger, with 2 Drill Bits 6"10" and 3 Extension Rods 8"12"20", Mixing Ratio 30:1, for Fence, Farmland and Garden
Condition: New
Buy Now, Pay Later
As low as
$29.58
/ mo
Learn more
- – 6-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
Non-returnable item
Learn more
Non-returnable. Transportation of this item is subject to hazardous materials regulation
View our full returns policy here.
Availability:
In Stock.
Arrives
Jul 24 – Jul 28
Size Name: 52cc+2 bit(6"10")+3 Ext(8"12"20")
Features
- Perfect Earth Digger - Creates holes for fence posts, sets up a mailbox, constructs a deck, plants a lot of trees, and more.
- EPA-Certified Engine - The powerful 52CC engine is EPA-certified to ensure safety and environmental protection.
- Main Parameter - Engine: Single Cylinder,2-stroke, air-cooled;2 Cycle Oil/Gasoline Mixing Ratio:1:25; Tank capacity:1.2L; Safety: Bit Lock; Power:1.8KW/8000rpm; Transmission components: ball bearing shafts and alloy gears; Carburetor with pump; Easy starting system (cord starter).Centrifugal clutch.
- Comfortable to Operate - 1. Manual recoil easy start. 2. Can be handled by one or two people easily for a wide variety of digging tasks. 3. Ergonomic butterfly handles, The emergency stop switch is conveniently located on the handle for quick shutdown.
- Professional Tools - The maximum depth using the single bit is 2.6 feet, Different sizes of auger bits are included(6"10")and extension rods, in 3/4" standard shaft size to meet different trenching requirements, Specially designed for heavy-duty digging in challenging soil or terrain conditions will help you to get all of your digging chores done quickly and with minimal effort.
Description
This powerful auger can be used for fence posts, installing mailboxes, building decks, planting trees and more. One package is the engine head and the other package contains the drill bit and other accessories. Professional and reliable gasoline engines. The high-torque engine with a transmission featuring ball-bearing shafts and alloy gears can handle a wide range of soil conditions. One or two people can easily operate the auger.
Manufacturer: DC HOUSE
Part Number: ED52610
Item Weight: 21.4 pounds
Product Dimensions: 42.1 x 10.8 x 20.65 inches
Item model number: D52-F
Size: 52cc+2 bit(6"10")+3 Ext(8"12"20")
Style: 52CC+6"+10"+Ext
Material: Aluminum
Item Package Quantity: 1
Certification: Epa
Included Components: Spark Plug, Oil Mixing Bottle, 6" Auger, 10" Auger, Tool Kit, Extension Rods
Date First Available: December 26, 2020
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Jul 24 – Jul 28
This item is non-returnable:
Non-returnable. Transportation of this item is subject to hazardous materials regulation
View our full returns policy here.
Non-returnable. Transportation of this item is subject to hazardous materials regulation
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Size Name: 52cc+2 bit(6“10”)
Works great. Nothing to assemble. Just put the auger on, mix gasoline and its ready to go.
Reviewed in the United States on May 17, 2026 by Jeff C
Size Name: 52cc+2 bit(6“10”)
Worth it. I've been using it to dig post holes for a fence, and it fires up first pull. Does what it's supposed to. I'd recommend it way better than digging by hand.
Reviewed in the United States on June 6, 2026 by deazy
I decided to build a deck and I bought this, with a 12" auger, to drill the pillar holes. I went 28" deep. I'd never used an auger before. The unit came in two boxes, the one with the auger in it was destroyed and was repacked by FedEx somewhere along the way. But, the auger was fine. It's very substantial, made of very thick steel, so I can see why the box was trashed. The engine came a day later in good shape. There is a mixing bottle included, so you can measure the gas and the 2-stroke oil to the correct ratio. The manual says 30:1 gas/oil. Customer service said 25:1 is recommended. The oil I purchased said 50:1... I went 30:1. Separately I purchased a small level that I taped to the top, so that I could keep checking if I was drilling vertical. When the motor is running that's shaking all over, but when stopped it let me check if I was still on line. I had no issues, other than the mixing bottle. When capped and shook, the cap leaks everywhere, so fill only half way, wear gloves, and shake only enough to mix. I complained to customer support about this. The auger pins to the shaft of the engine. The fit is kind of loose; not a tight fit. It started fine, ran fine. I'm 6'3" no weakling, and if you jam into a rock or go sideways in the hole so that it digs in, IT WILL RIP THE UNIT OUT of your hands and spin it before it comes to a stop. So, be careful. With a 12" auger there's a lot of torque. Plunge slowly and brace your arms against your body. My soil was mostly sandy/clay and it didn't have issues cutting through it, though the clay sticks and you have to lift the unit up to clean off the auger several times. But you will be doing a lot of sweating. As you get deeper in the hole and you're bent over, it's increasingly more difficult to resist the torque. I was getting down on my knees to brace better. At 28" depth, the bottom of the motor is just a few inches above ground level. An extension, is probably a good idea, especially if you're going deeper. If you're using 12" concrete forms, they are not all 12 inches, so some will not fit into the holes. You have to use a manual post digger to enlarge the hole. I also opened up some of the holes by lowering the auger in, and while running, scraping it up and down the sides. It's tricky, because if it grabs, it's a sudden grab and again, hard to resist the torque. Anyway, I got my eight holes drilled and my concrete poured. I'll be drilling two more holes for the stair supports. And I'll try using it to drill some holes for planting trees. Overall I'm satisfied. It did the job. Good deal.
...
show more
Reviewed in the United States on October 7, 2025 by Ves
Size Name: 52cc+2 bit(6“10”)
We had to put up a fence. No rain for months ground hard work by hand. We bought this digger for our 17 hole and finished in one day. The price was good, we would had to paid almost the same to rent one. Now we have our own to use and help others. We had no trouble starting. Just need to know how.
Reviewed in the United States on March 20, 2026 by J J
Size Name: 52cc+2 bit(6"10")+3 Ext(8"12"20")
This thing is now getting cheaper than when i bought it! I used my dad's HF auger and decided I needed one! This doesn't have the power or heavier duty bits that dad's does, but it does fine in our sand and light clay. The fuel mix ratio is very odd. It starts easy, every time. The HF auger bits would cut roots. This won't. If you're digging anywhere with even finger sized roots, run barely above idle. Why? Because when it grabs a root, the bit stops and the powerhead spins. It will twist your arms like a pretzel, faster than you can let go or jump off the ground. I literally thought it ripped my forearm muscles. I was sore for days. I use a Sawzall to cut the roots I hit, then keep digging. I'm about 1/3 done with a 500+ foot fence, no hiccups. The extensions will be nice when I get down near the creek and need to dig 4 feet. Try that with manual post hole diggers. The HF auger didn't have extensions either. As long as I don't have the starting issues others complained about, I call this a win! Buy it!
...
show more
Reviewed in the United States on August 16, 2024 by J.R.
Size Name: 52cc+2 bit(6"10")+3 Ext(8"12"20")
It is of very poor quality, and when I tried to use it, I could never get it to start. I used the recommended gasoline and the recommended oil, but there was simply no way to get it to turn on. I tried to return it, but I was told that it was non-returnable and that the only way they could assist me was by guiding me over the phone on how to use it... I know how to use it—the problem is that this one simply doesn't work.
...
show more
Reviewed in the United States on May 4, 2026 by Javier Soto-George
Size Name: 52cc+2 bit(6"10")+3 Ext(8"12"20")
Literally worth every penny incredibly easy to use. It goes through clay through sand through dirt. It’s gotten very good power and the blades are clean and easy to assemble use saved me hours of work
Reviewed in the United States on May 8, 2026 by Daniel
Size Name: 52cc+2 bit(6“10”)
Perfect
Reviewed in the United States on May 20, 2026 by Tommie L. Jackson