Creality Laser Engraver 22W Output, 120W High Power Laser Engraving Machine, CNC Laser Cutter and Engraver Machine for Metal and Wood, Paper, Acrylic, Glass, Leather etc, 17" x 16"
Condition: New
Buy Now, Pay Later
As low as
/ mo
Learn more
- – Up to 36-month term if approved
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
This item is eligible for return within 30 days of receipt
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Only 3 left in stock, order soon!
Arrives
Monday, Sep 1
Recently Viewed
Color: Light Gray
Features
- 22W Top Cutting Capability - The Creality Falcon 2 laser engraver has FAC spot compression technology, which can increase the laser power to 22W through the spatial combination of 4 powerful 6W laser diodes. 22W laser module, higher power, stronger penetration, thicker, deeper, and faster cutting. High-density laser can easily cut 15mm basswood, 10mm dark acrylic, and 0.1mm thin metal sheet, Class IIIa, 120000mW output power
- Engraving Speed up to 25000mm/min, High Accuracy - Compared with the Creality 10W engraving machine, the cutting speed of the Creality falcon 2 laser engraver is increased by 200%, and the engraving speed is increased by 100%. Out of the box, you can typically assemble a Creality falcon 2 laser engraver in 10-20 minutes
- Color Engraving - The Creality falcon 2 laser engraving machine can create hundreds of colors on metal surfaces using a super-strong laser beam. It also supports offline creation and dynamic preview, making it easy to use without a computer
- The First Integrated Air Assist - The integrated air assist can not only be adjusted manually through the knob, but also intelligently adjust the airflow through the LightBurn software to blow away the smoke and dust during the engraving process, protect the laser head lens, and make the cutting more clean and smooth, so as to keep the edge of the work clean
- Triple Intelligent Monitoring System - The Creality falcon 2 laser engraver has a triple intelligent monitoring system that includes airflow, flame, and lens monitoring. It reminds the user of the airflow size and stops the machine immediately if a flame is detected. The lens monitoring system triggers an alarm when the lens is dirty
Product Dimensions: 26.14 x 22.44 x 6.81 inches
Item Weight: 15 pounds
Manufacturer: Creality
Item model number: CV-50
Is Discontinued By Manufacturer: No
Specific instructions for use: engraving and cutting
Warranty Description: 1 year
Batteries required: No
Included Components: Air Pump*1, Stand*4, Basswood Board*3, Allen Wrench*1, Anti-static Brush *1, Open-end Wrench*1, Type-C Cable*1, Adapter*1, power cable*1, Goggles*1, Dust-free Cloth*1, Black Cable Straps*3, Multi-level Fixed Focus Strip*1, Key*1, Machine Frame*1, Protective Lens*1, Hexagon screw*2, TE Card & Card Reader*1, Type-A to Type-C Adapter*1
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Monday, Sep 1
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: Falcon-10W Basic
. Pros: The machine is quality built, and assembly is somewhat straightforward. It operates smoothly and seems very accurate. The provided gcode example was cut cleanly and accurately on the two pieces of basswood provided in the kit. The files on the included microSD card (i.e. comes installed on a USB-A reader) are useful and includes a User Manual, controller software ( Lightburn (30 day trial) and LaserGRBL), operation video, focusing video, and firmware update instructions (i.e. get the latest firmware release for this model from the Creality.com website). Also note that this unit comes with laser safety glasses (required to protect your eyes from the light emitted by the laser beam).. Cons: None as far as the machine quality and operation is concerned. General Info/Advice for Beginners: 1. Buying the laser engraver/cutter is only the first item you need. BEFORE YOU USE THE LASER: 2. You must adequately vent the gases and smoke generated by the laser engraving/cutting process if using the unit indoors. My preference was to purchase the Creality Laser Engraver Enclosure which has an 80mm (3”) vent fan and hose and thick colored plastic zippered access panel on top that helps protect your vision. Note that my use is in a cellar with a casement window that is 30’ away from where I had to locate the laser unit. I upgraded and modified the enclosure to contain a 120mm vent fan capable of moving 141 cu ft/min. And attached 30’ of expandable conduit (similar to a dryer hose) to a dryer vent through the window (i.e replaced the glass window with a pane of transparent acrylic). This setup works well. 3. A honeycomb cutting table is necessary to protect your workbench/table that the laser is on. I bought the Creality Cutting Table for Laser Engravers kit. It comes with the aluminum honeycomb unit, an aluminum bottom plate, and a set of leg risers for raising the engraver frame so you can accommodate large objects and a separate roller unit that allows you to engrave cylindrical objects. I’ll do a separate review on the the honeycomb kit. 4. For this unit, an air assist unit greatly enhances the engraving and burning operation results. It helps to minimize burn and soot marks on the piece being worked on. I bought the Creality Air Assist for LaserEngraver which works very well. I’ll do a separate review for that.
...
show more
Reviewed in the United States on October 15, 2023 by Bruce K.
Color: Falcon Pro-10W with Air Assist Pump
The media could not be loaded. I absolutely love this laser. It is the first laser I have bought and used and it has been pretty simple so far. The instructions aren’t fully clear so pay attention to putting it together. There is a pin for the limit switch that goes on the controller side. I put it together backwards and had to take apart and reassemble. So far, I have engraved several items without issue. It has been accurate with everything I have done so far. I will be upgrading to a model that has a camera assist for easier aligning. Not an issue, just takes longer to get everything lined up. This machine is built very well and I can see using it for a while. It was larger than what I expected so it’s nice being able to do bigger items. All in all, I would recommend!
...
show more
Reviewed in the United States on July 5, 2025 by Cody Payne Cody Payne
Color: Light Gray
I had thought of giving the Creality Falcon 2 four stars. This is because I couldn't get it to work with my mac and I had to purchase a pc, an additional cost. Mine did not come with a honeycomb bed, which I had to buy separately. But this is no big deal as other brands I know of do not offer this either. And I had previously bought two different brands and got disappointed. I love that the machine framework comes pre-assembled. And it comes with an air an air assist. One headachy thing out of the way right off the bat. The instructions for installing the software can be a little challenging. But once you get this down you're good to go. The work I'm getting is nothing short of awesome. This is what really matters. This is why I gave it full five stars. Couple Things to Keep in Mind: - The flash drive that comes micro memory card reader you need to connect the machine to the software (I use Lightburn) may be outdated and therefore not work on your computer. This was very frustrating for me. You may have to buy a new USB memory card flash drive (3.0+). - It kept stopping in the middle of a larger job. Wasted precious material in the process. The "help" page was no help. I resolved this by setting my computer sleep option to "Never". Still, a very good machine.
...
show more
Reviewed in the United States on April 25, 2025 by Kamau Kamau
Color: Falcon-10W Basic
This is not beginner friendly. It took us days of consistently trying different things to finally get it to work. We played with it a couple times, but then stopped using it (realized we did not have many things to create). We tried to use it again maybe a month or two later. It would not communicate with my PC. We tried different programs, all of which said they did not see an engraver attached to the computer. I tried to talk to support, but they are in China which made communication very difficult to understand. They tried to assign a ticket, but it was not worth the hassle after I spent an afternoon telling them that everything they suggested to do to fix the issue I had already done to no avail. Save yourself the time and the money and purchase a laser engraver that is probably more expensive but will be easier to use. The last information that I was able to understand was that I needed to try a cheaper or not-as-new USB connection. Not sure how that was suppose to be possible. DO NOT BUY.
...
show more
Reviewed in the United States on May 15, 2025 by Michael