Creality CR Touch Auto Bed Leveling Sensor Kit for 3D Printer with Metal Push Pin for Ender 3/Ender 3 V2/Ender 3 Pro/3 Max/Ender 5 pro/CR-10 with 32 Bit V4.2.2/V4.2.7 Mainboard
Condition: New
Buy Now, Pay Later
As low as
$8
/ mo
Learn more
- – 4-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Monday, Jul 6
Recently Viewed
Features
- Creality 3D Printer Auto Bed Leveling Kit - The Creality cr touch auto bed leveling kit fulfilled simple structure and high precision. Performs multi-point detection on the printing platform and records the height of each detection point. Stable quality, long service life, and can be reused more than 100,000 times.
- The Firmware Download - According to your 3D printer Model, select a mounting bracket to install it on your 3D Printer, then remove the Z-axis limit switch. Download the corresponding firmware from the Creality official website and copy it to the SD card. When the power is on, the cr touch firmware will be updated. (Note: Check your motherboard version and download the correct cr touch firmware).
- Wide Application - The Ender 3 upgrades cr touch is compatible with Creality Ender 3 V2/ Ender 3/ Ender 3 Pro/Ender 5/Ender 5s/Ender 5 Pro and CR-10 3D Printer. (Note: Our ender 3 v2 upgrades can only be compatible with 32-bit V4.2.2/V4.2.7 mainboard 3D Printers).CR Touch Automatic Bed Leveling Sensor Kit does not fit SKR Mini E3 V3 on Ender 5 plus
- Durable and Strong Compatibility - The cr touch kit is compatible with PEI/sticker/glass/metal bed. Ender 3 auto bed leveling kit works perfectly with any surface, especially the design of the metal push pin allows for longer service life.
- Easy Installation - 3 different kinds of mounting brackets allow for installation on multiple 3D printers. The Ender 3 bed leveling kit is simple in structure, and it is convenient for printing when connected. Automatic compensation of the Z-axis so as to stabilize print.
Features
- Creality Official Product: CR Touch auto bed leveling sensor fulfilled simple structure and high precision.Performs multi-point detection on the printing platform and records the height of each detection point.Stable quality, long service life, and can be reused more than 100,000 times.
- Widely Application: The upgraded CR Touch bed leveling kit is compatible with Creality Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5//Ender 5s/Ender 5Pro and CR-10 3D Printer. (Note: Only compatible with 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printers).
- Durable & Strong compatibility: Compatible with PEI / sticker/ glass / metal bed.Creality upgraded CR Touch 3d printer auto bed leveling sensor Kit works perfectly with any surface, especially the design of metal push pin allows for longer service life.
- Easy Installation: 3 different kinds of mounting brackets allows for installation on multiple 3d printers. The CR-Touch sensor is simple in structure, convenient for printing when connected. Automatic compensation of Z-axis so as to stable print.
- After-sales Service: If you have any unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
Package Dimensions: 3.94 x 2.48 x 1.65 inches
Item Weight: 4.6 ounces
Date First Available: July 12, 2021
Manufacturer: Creality 3D
Brand: Comgrow
Material: Plastic Metal
Color: Black
Product Dimensions: 2.48"D x 1.61"W x 3.93"H
Item Weight: 0.12 Kilograms
Product Dimensions: 2.48 x 1.61 x 3.93 inches
Item Weight: 4.2 ounces
Item model number: 3DZDTPZHTJ
Date First Available: July 12, 2021
Manufacturer: Creality 3D
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Monday, Jul 6
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
The CR Touch is an auto-leveling sensor designed to enhance the 3D printing experience, particularly when paired with 3D printers like the Creality Ender series. Here's a review highlighting its key features and benefits: 1. **Auto-Leveling Precision:** The CR Touch excels at its primary function—automatically leveling the 3D printer's build platform. It uses a precise probe to measure multiple points on the bed's surface, ensuring that the nozzle is always at the optimal height. This results in consistent first layers and improved print quality. 2. **Easy Installation:** Installing the CR Touch is relatively straightforward, especially if you follow the manufacturer's instructions or community guides. It's compatible with a variety of 3D printers, including the Creality Ender series, making it a popular choice among users. 3. **Compatibility:** This sensor is compatible with a wide range of 3D printing materials and can be used with both heated and non-heated beds. It's versatile and accommodates various printing requirements. 4. **Reduced Calibration Efforts:** With the CR Touch, manual bed leveling becomes a thing of the past. This not only saves time but also eliminates the frustration of fine-tuning the bed level before every print. 5. **Improved Print Adhesion:** Proper bed leveling enhances the initial layer adhesion, reducing the chances of print failures caused by warped or unlevel surfaces. 6. **Reliability:** Users often report that the CR Touch is reliable and accurate. Once set up correctly, it consistently ensures a leveled bed, reducing the need for frequent adjustments. 7. **Community Support:** The CR Touch benefits from an active and supportive community of users who share tips, settings, and troubleshooting advice. This can be invaluable for those new to auto-leveling systems. 8. **Price:** While it's an additional expense, the CR Touch is generally considered a worthwhile investment due to the time and hassle it saves in the long run. 9. **Longevity:** Many users have reported that the CR Touch is durable and has a long lifespan, making it a cost-effective choice over time. 10. **Print Quality:** The auto-leveling provided by the CR Touch often results in improved print quality, especially for intricate and complex models. It helps prevent issues like uneven layers and adhesion problems. In conclusion, the CR Touch is a valuable addition to a 3D printer, offering precise auto-leveling capabilities that greatly improve the printing experience. While it comes at an extra cost, the time saved and the enhanced print quality make it a worthwhile investment for both beginners and experienced 3D printing enthusiasts.
...
show more
Reviewed in the United States on September 14, 2023 by Patrick James
I installed the Creality auto leveler on my Ender 3 V2, and honestly, it made a huge difference in my printing experience. Before this, I was constantly adjusting the bed manually, and it felt like I was chasing perfect leveling every time I started a new print. After installing the leveler, the printer handles that part for me. The probing is quick and consistent, and my first layers are coming out much more even across the entire bed. I especially noticed improvement in areas that used to give me trouble, like the corners. Installation was straightforward, but I do recommend watching a quick setup video if you're new. Also, don’t forget to unplug the Z endstop if your instructions mention it. Once everything was set up and firmware updated, it worked smoothly.
...
show more
Reviewed in the United States on May 5, 2026 by R.EL
Definitely watch a video before trying to install yourself. It is a little tricky but getting the hang of it takes a little time. Since installing I have had no issues and I needed to watch another video on how to update the firmware properly since the included instructions are not the best. You only need to manually level once after install and it handles the rest. If you are getting proper print bed adhesion, make sure that your z-offset is properly set. Well worth it for the money and a cheap and fun upgrade.
...
show more
Reviewed in the United States on May 19, 2026 by Avery Goss
This is a difficult product to review. The hardware itself is fantastic. 5/5 stars. I worry that the ribbon cable from the sensor to the motherboard is a bit flimsy and hangs precariously close to the Y-motor, but some simple cable management should mitigate that. That said, the firmware implementation by Creality is just abysmal. Depending on which of Creality's three different websites I checked, I found no fewer than three different firmware editions that appeared to be correct for my Ender 3. The first two bricked the machine, to the point it wouldn't boot. The third would boot, but left the screen scrambled. As of January 1, 2023, there appears to be no official working Ender 3 firmware support for the CR Touch. I finally stumbled upon the 3D Printscape website and YouTube videos. This guy is an absolute godsend. He has diagnosed the problem with the current firmware and re-compiled a working version. If you have the scrambled screen issue, I would suggest searching for "cr touch firmware scrambled screen" and working through his library of videos on the process. Installation is not difficult at all if you can find good instructions. Unfortunately, that is somewhat out of Comgrow's hands. Comgrow can't point to a specific firmware, as Creality could upgrade firmware at any minute rendering their recommendation obsolete. To their credit, Comgrow support did try to assist with the issue. I just found 3D Printscape before they were able to solve it. Unless Creality gets their act together, successful installation is a matter of good searching skills and a bit of luck!
...
show more
Reviewed in the United States on January 2, 2023 by William E. Janes
TL;DR : Can be tricky to install if you are not experienced in working around electronics or modifying firmware. If you can follow the online instructions, it’s well worth adding to your Creality printer. Let’s acknowledge the 500 pound gorilla in the room : the installation of the CR touch is not hard, but it isn’t easy either. If you find the good tutorials on YouTube, study them and follow them to the letter this should be relatively easy to install as far as the mechanical engineering goes. Then there is the software engineering in the form of the firmware upgrade that must be installed to take advantage of the new hardware you just installed. I opted to run with the Creality firmware just to get up and running as quickly and easily as possible. *** NOTE *** This is not a true bed leveling device. It can only compensate to a limited degree for the bed not being leveled. You will still need to level your printer’s bed manually to a pretty precise level BEFORE running the bed leveling software. Think of this as a finishing touch rather than the be-all-end-all. I use a feeler gauge and manually move the print head to a rough 3x3 grid to start the bed leveling process *AFTER* installing the CR Touch, but *BEFORE* running the software leveling. Once I am satisfied the rough leveling is pretty good, then I throw out the rest of the instructions. I don’t care what, there WILL BE DIFFERENCES between cold leveling and normal printing temperatures leveling, and the stock instructions and firmware will do the leveling cold. I will only run the software once everything has been up to printing temperatures for at least 10 minutes. Trust me - this will pay huge dividends later. The other thing you can do as part of running the bed leveling software is to take time and several prints to dial in your z offset. Despite all my careful planning and instruction I found on YouTube and the internet in general, I found the best settings for my Ender 3 v2 were several hundreds off what should have been optimum. Once I used trial and error to discover that “sweet spot” I marveled at how much better my prints have been compared to before the CR Touch. This is especially true for “calibration” prints like Benchy or the CHEP cube. Since getting dialed in, I stand all amazed at how nearly flawless the Benchy prints have cranked out by the v2. Smooth as silk, and nearly no stringing at all. All other prints are leaps in quality better than before I installed the CR Touch. All in all, it is very much worth the cost to upgrade your Creality printer with a CR Touch.
...
show more
Reviewed in the United States on June 3, 2023 Reviewed in the United States on June 3, 2023 by Leon W. Blocker
I bought this to replace my old cr touchb which lasted 5 years. After a little over a month it stopped working and the pin had some how bent. I tried reaching out to the support team via email.And the message system on here but got no response. And the chat function did not work at all
Reviewed in the United States on February 22, 2026 Reviewed in the United States on February 22, 2026 by christina alam
Easy to install on ender 3 and install firmware. Has been working great and helping my prints come out better.
Reviewed in the United States on April 26, 2026 by a_deleon
I love this unit and it makes 3d printing a dream with my ender 3 pro. I don't have to level my print bed anymore. It's super easy to use once you have it set up!
Reviewed in the United States on May 12, 2026 by Christopher Altland