BTF-LIGHTING FCOB COB LED Strip 528LED/m Flexible High Density Uniform Light 14W/m 16.4FT DC12V Natural White 4000K CRI 90+ 10mm Width for Home Indoor Decoration(No Adapter or Controller)
Condition: New
Buy Now, Pay Later
As low as
$4
/ mo
Learn more
- – 4-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Saturday, May 9
Recently Viewed
Color: Natural White 4000K IP30
Size: 16.4FT DC12V 528LED/m
Features
- Ultra Bright and UniformDC12V 528LEDs/m 16.4FT Natural White 4000K FCOB COB LED Strip. Flip Chip On Board LED strip(FCOB).Adopting high brightness LED as the light source to ensure the brightness while maintaining color consistency.Compared with traditional 5050SMD 3528SMD light strips, FCOB COB LED strip dense light-emitting units create a brighter, softer, spotless and more uniform light, avoiding black in the middle area. CRI 90+
- Universal CompatiblityOur FCOB LED strip is compatible with most dimmers using standard control protocols including ELV, TRIAC, DMX, Dali, 0-10V, RF.Such as C01RF+RC01RFB controller kit,RF 14Keys,WB5,LM052,LM053,SP630E+RB1 controller kit,SP530E and so on.(Controller Sold Separately)
- Shopping With ConfidenceAdopting real double-layer copper PCB board, better electronic conductivity and heat dissipation.More than 65,000 hours lifespan.We also provide 24/7 customer service.For troubleshooting and replacement, or any questions about purchase or installation, please feel free to contact us.
- Cuttable and LinkableOur FCOB COB light strip is soft and flexible.The Spots to solder can be cut.Two 5.5mmx2.1mm DC Plugs on two ends, one is female the other one is male.It also support end to end connect in series.10mm width.
- Wide ApplicationOur FCOB LED light is perfect for various interior decoration.Such as living room, hallway, bedroom, kitchen, accent lighting, cabinet lighting, stair, mirror, corridor, DIY backlight, DIY lighting, special use and other commercial and residential lighting projects.Come with a strong self adhesive backing.Tips:Before installation, please thoroughly clean and dry the installation surface
- Package included 1X 16.4FT COB LED light(No Power Supply or Controller), 2X Non-Wired Gapless Solderless Connector ,3X LED Strip fixed Clips,1X 20AWG 20AWG Extension Wires,1XUser manual. Two ends wire connector can be used for Extending your FCOB strip light, Splicing, corner connection, connecting the power supply directly.
- Power calculationThe actual power of 16.4FT FCOB COB LED strip will be affected by the voltage drop. For example, the power of DC12V 16.4FT 528LEDs /m is 28W, not 14W/mx5m= 70W .The calculation method of 70W is wrong, and the voltage drop should be considered.
Color: Natural White 4000K IP30
Brand: BTF-LIGHTING
Indoor/Outdoor Usage: Indoor
Special Feature: DC connector, Dimmable, No Light spot, Uniform light, work with controllers or power directly
Light Source Type: LED
Power Source: DC
Light Color: White
Theme: Home Lighting Decor
Occasion: Christmas
Material: Metal
Color: Natural White 4000K IP30
Brand: BTF-LIGHTING
Indoor/Outdoor Usage: Indoor
Special Feature: DC connector, Dimmable, No Light spot, Uniform light, work with controllers or power directly
Light Source Type: LED
Power Source: DC
Light Color: White
Theme: Home Lighting Decor
Occasion: Christmas
Material: Metal
Color Temperature: 4000 Kelvin
Controller Type: Remote Control
Number of Light Sources: 2640
Voltage: 12 Volts (DC)
Wattage: 14 watts
Item Weight: 0.12 Kilograms
Number of Items: 1
Control Method: App
Item Length: 16.4 Feet
Manufacturer: BTF-LIGHTING Technology Co., Limited
Model: FCOB-12V-528L-W-IP30
Item Weight: 4.2 ounces
Item model number: FCOB-12V-528L-W-IP30
Manufacturer Part Number: FOB5M12V10mm528LNWW30
Special Features: DC connector, Dimmable, No Light spot, Uniform light, work with controllers or power directly
Date First Available: May 23, 2021
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Saturday, May 9
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Color: Natural White 4000K IP30
Size: 32.8FT DC24V 528LED/m
These are AWESOME. The light output is so even. None of the typical “hot spots” you get with LED strips that use larger SMD’s like 5050’s. The what I’m assuming is silicone diffusing layer over the top of the chips makes for a really nice even light output. The amount of light they provide is really nice as well. The adhesive could be of better quality, but with high light output LED strips of any variety you can seldom rely on the adhesive to hold them alone. They always seem to expand once they get warm which causes the adhesive to work itself loose. I put a section of them in a 1/2” U channel from the hardware store, and printed some brackets that cap the ends while allowing me to be able to rotate the strip 90° for use as a benchtop work light. Works phenominal because i can direct the light right onto my work area without being blinded, and the aluminum channel works well as a heatsink for them. A small m Meanwell PS, and a PWM dimmer works great for dimming them. I typically just solder directly to the strip after removing the oxide from the copper pads with an eraser, go over it with a flux pen and quickly solder pre-tinned 20ga silicone wire. I seldomly trust the connectors that sometimes come with any strip light. If you can solder, connecting to these is very easy. If you start trying to go to cheap on LED strips, I’ve noticed the quality begins to suffer. The color output of the strips is very consistent at least within the same spool. Will definitely be using more of these in the future.
...
show more
Reviewed in the United States on September 25, 2025 by Evan
Color: Warm White 3000K IP30
Size: 16.4FT DC24V 336LED/m
The media could not be loaded. Yeah these are awesome. I did a section of the "Christmas" light style, and took them down but these are super smooth looking. like a tube. If you get really close and are extremely critical you can sort of make out the individual bulbs, but these are as good as it gets for tape lights I think. The strips are super sticky and tough. the installation is a breeze. be careful to MAKE SURE you keep red with red and black with black. I swapped them at some point and it took a large effort to correct. Also get a transformer without a fan. I got the cheap one with the fan - sent it back and got the silent one. The fan in the bigger transformers is super loud. I did almost 200 feet of these in a single room. Did 4 loops with wire going back to the transformer so I didn't get a voltage drop toward the end of the loop and they are stunning! love them. I got the 500 watt transformer just to be safe. Im looking around the house for another place to put these. The color of these is perfect too, warm but not yellow and super bright. there is a slight hesitation when I turn them on, but that is not the lights its the transformer.
...
show more
Reviewed in the United States on October 28, 2025 by Kris Carmody Kris Carmody
Color: Warm White 3000K IP30
Size: 16.4FT DC24V 336LED/m
Very bright and nice! ONE ISSUE OF CONTENTION/CONFUSION: This is going to get a bit long and technical. Bear with me. I'm a noob when it comes to electronics and LED lighting. I'm trying to follow the best recommendations from various websites and Youtube videos, and it's taught me just enough to be dangerous. I'm going to tell you about a misunderstanding I had, in case you are prone to stumble into the same incorrect thought process. For this product both the Listing Title and the product Parameter Table say the 16.4 FT DC24V 336 LED/m strip needs 8 watts of power per meter of LED strip (8 watts per meter x 5 meters = 40 watts total). BUT THEN there is this little paragraph over in the right column in the "About This Item" section called "Power Calculation" which is written in a confusing manner and seems to say "8 watts per meter is not enough for this strip ... it actually needs closer to 30 watts per meter because voltage drop needs to be considered." At least that's how I read it. Looking at it again for the 15th time, another way to read it is "due to voltage drop, you won't actually end up with a total of 40 watts, you'll end up with a lower amount closer to 30 watts." But I took it the first way and thought it was telling me I need 30 watts per meter. And if that is the case, you would need 150 watts total (30 watts per meter x 5 meters = 150 watts). And then you'd want to increase that by a safety factor of 20%, so you'd end up at 187.5 watts (150 watts divided by a 0.80 safety factor = 187.5 watts). Due to this correction/recommendation/misunderstanding I purchased a 200 watt power supply (rounded up from 187.5 watts). But then when I received everything, I hooked up the LED strip, got out my multimeter, and measured the amperage draw: it was only 1.43 amps. Which means the LED strip at full power only needs 34.32 watts (1.43 amps x 24 volts). 34.23 watts divided by 5 meters = 6.864 watts per meter. So the amperage measurement I took with my multimeter indicated my LED strip was pulling even less than the "8 watts per meter" mentioned in the listing, and a *hell* of a lot less than the "30 watts per meter" I thought the "Power Calculation" paragraph claimed! What's my point? If you read that paragraph the way I did, don't worry about buying a 200 watt power supply like I did! It won't hurt anything, but it's WAY overkill. And if you need a dimmer knob, don't get worked up thinking you have to find a knob or switch capable of handling a minimum of 6.25 amps (150 watts divided by 24 volts) or a minimum of 8.33 amps (200 watts divided by 24 volts). You can get away with a dimmer knob that carries a max rating of 2.4 amps. It will work. According to my measurement, the strip only pulls 1.43 amps. And even when you build in a 20% safety factor, it only pulls 1.7875 amps (1.43 amps divided by a 0.80 safety factor = 1.7875 amps). Or if you work from the nominal "8 watts per meter" in the listing title, you only need 2.0825 amps when the 20% safety net is factored in (8 watts per meter x 5 meters = 40 watts; 40 watts divided by 24 volts = 1.666 amps; 1.666 amps divided by a 0.80 safety margin = 2.0825 amps). I know that was a lot of numbers and I hope I didn't lose anybody. But suffice it to say, don't get confused by that "30 watts" paragraph. It isn't saying "30 watts per meter." Base your calculations off of 8 watts per meter, add in a safety factor to make sure you're not maxing out your components, and you'll be fine. Get a 50 watt power supply. That's the one you need. For everybody who knew better, feel free to laugh at me. It's OK. For everybody who was confused like I was, don't sweat it. It happens. Buy this LED strip. It's nice. And pair it with a DC 24 volt, 50 watt power supply. The end.
...
show more
Reviewed in the United States on December 11, 2025 by Mark McConnell
Color: Natural White 4000K IP30
Size: 16.4FT DC24V 528LED/m
Great quality light which is perfect for under cabinet lighting. This was easy to install and looks great. It’s bright and a high quality light strip. Would happily buy again for future projects
Reviewed in the United States on November 4, 2025 by Anonymous
Color: Cool White 6000K IP30
Size: 16.4FT DC24V 528LED/m
These high-density COB LED strip lights produce bright, consistent daylight-white illumination with excellent color rendering (CRI 90+). The light output is smooth and uniform along the entire length, making them perfect for indoor home decoration or accent lighting. Installation was straightforward thanks to the flexible strip and adhesive backing. The only downside is that the package doesn’t include a power adapter, so you’ll need to purchase a compatible DC24V power supply separately. If you don’t mind sourcing your own adapter, these strips perform exceptionally well and look fantastic when installed.
...
show more
Reviewed in the United States on July 21, 2025 by John and/or Katie Grey