Bitmain Genuine Antminer Power Supply APW7 PSU 1800w 110v 220v New Model for S9 or L3+ or Z9 Mini or D3 ASICs w/ 10 Connectors

Features

• Compared to the older Antminer APW3++, the new Antminer APW7+ Power Supply is 1800w with an input voltage of 220v. The PCB uses a conformal coating to prevent damage from high voltage spark discharges on MOS pins, or near high-pressure solder joints when external conductive particles or dust enter the PSU.
• Considering the high temperature in mining operations, all internal components are selected with a standard of 105C, so the APW7 has a much longer lifespan than a general use PSU under similar high temperatures.
• One APW7 can power up one S9i, one L3++, one D3, one V9, one X3, one E3 or one Z9 mini. This APW7 has 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)
• The APW7 can deliver a maximum power of only 1000W if it is connected to a 110V mains power supply. To obtain the rated power of 1800W, the APW7 must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
• The air flow direction runs from the AC input to the DC output, which is the same configuration as most miners. This proves beneficial for those with large-scale mining operations where heat management is a major consideration.

Description

Bitcoin Mining Hardware provides you best and powerful mining rig from which you can mine continuously crypto currency whenever and where ever you want. Here are some benefits our miner: PCI-E Interface Rig: In addition, because the APW7 interface is based on PCI-E, which is utilized by the majority of contemporary bitcoin mining hardware power schemes, Perfect Design for Antminer S9 or L3+ or Z9 Mini or D3 and other brand min On our power supply, The fan is operated based on temperature control. Only when the temperature reaches a certain height, the fan will start to dissipate heat. The higher the temperature, the faster the fan speed. If the fan does not rotate during the test, the temperature is not high and requires heat dissipation. At this time, the product is usually working to output power.

Model Name: Miner power supply

Brand: Pstaroth

Compatible Devices: ASIC Mining Devices (S9i, L3++, D3, V9, X3, E3, Z9 mini)

Connector Type: pci-e

Output Wattage: 1800 Watts

Form Factor: 8.66 x 4.25 x 2.44 inches

Wattage: 1800 Watt-hours

Cooling Method: Air

Item dimensions L x W x H: 8.07 x 4.29 x 2.52 inches

Current Rating: 150 Amps

Compatible Devices: ASIC Mining Devices (S9i, L3++, D3, V9, X3, E3, Z9 mini)

Connector Type Used on Cable: pci-e

Output Wattage: 1800 Watts

Form Factor: 8.66 x 4.25 x 2.44 inches

Wattage: 1800 Watt-hours

Cooling Method: Air

Current Rating: 150 Amps

Maximum Input Voltage: 264 Volts (AC)

Minimum Input Voltage: 100 Volts

System Bus Connector Type: 6 Pin

Model Name: Miner power supply

Brand: Pstaroth

Manufacturer: Pstaroth

Item Dimensions: 8.07 x 4.29 x 2.52 inches