BIQU Cryogrip Pro Frostbite Matte Orange Cold Build Plate for Bambu-Lab A1 Mini 3D Printer 184x184MM Double-Sided Upgrade Room Temperature Print Removable Surface Platform
Condition: New
Buy Now, Pay Later
As low as
$4
/ mo
Learn more
- – 4-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Sunday, Jun 14
Recently Viewed
Size: A1 Mini
Color: Frostbite-Orange
Features
- Perfect Compatibility: BIQU CryoGrip Pro Frostbite Cold Build Plate is compatible with Bambu-Lab A1 Mini 3D Printer which has matte orange coating and scratch-resistant & self-recovering for ultimate durability.
- Low-Temp with No Glue Printing: CryoGrip Pro Frostbite Cold Build Plate delivers unparalleled adhesion for PLA(30-50C) and PETG(50-70C) at room temperature, while it also compatible with ABS(100C), saving heating bed time, 50% power reduction, eco-friendly and clog free.
- Excellent Adhesion and Zero Heat Generation: CryoGrip Pro Frostbite Panda Build Plate has unparalleled adhesion, reducing warping of large prints and remaining scratch, while allowing prints to be easily removes by bending the plate. If a print sticks too firmly, please place the plate in a freezer for 10 minutes to assist with removal.
- Easy to Removable and Clean: The printed model can be easily disassembled without the need for other tools. A simple wipe with water+soap can easily restore its adhesion, do not use solvents(e.g., alcohol) as these may cause permanent surface damage.
- Special Material Texture Printing: CryoGrip Pro Frostbite Build Plate sandwiched with 7 layers. The base and intermediate coating are respectively a highly active adhesion layer and matte orange ultra-high temperature light cured sintered layer, bring impact resistant, corrosion resistant, long life span, zero risk of repeated bending causing coating to peel off.
Package Dimensions: 9.76 x 9.45 x 0.51 inches
Item Weight: 8.8 ounces
Date First Available: November 27, 2025
Manufacturer: BIQU
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Sunday, Jun 14
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Size: P1/P2/X1/A1
Color: Glacier-Original
After using this build plate almost exclusively for over 2 weeks, here are my honest impressions of the product. Simply put, it sticks really well and releases when you need it to. I attempted to run it through a gauntlet of different brands of filament and I couldn’t find one that did not stick well to this build plate. I print a lot of articulated dragons with Silk PLA and with certain build plates, I will have adhesion problems at times. As a person who hates using glue on my build plates, it was a very welcome sight to see that glue is not required on this particular one. Unboxing and Initial Impression Packaging is very straightforward in a cardboard box, inside you will find an information sheet comparing the Frostbite and Glacier build plates that are offered in the CryoGrip series. You will also find a sticker sheet that has the AR code stickers to affix on the build plate for the X1 Carbon to read the proper build plate settings in the slicer. The build plate does have a slightly textured surface but it feels smooth to the touch and feels high quality. The easiest way to describe the texture of this build plate is that it sits right between the Smooth plate and Textured PEI plate that Bambu Lab offers. It also features an enlarged heat-isolating handle on the front with holes to facilitate quick cooling and make the build plate a lot easier to remove from the printer. The information sheet also outlines the settings needed to properly use the build plate. I initially set my slicer to run 5º C cooler but then I increased it to 10º C cooler with no problems. This build plate can also work with all filaments that have a nozzle temperature below 300º C so most engineering filaments will be compatible with this build plate. But where it shines is with PLA and PETG. The Frostbite version is even better at cold printing adhesion than this one with PLA and PETG. The gauntlet test I tested this build plate with numerous filaments. My printer is a Bambu Lab P1S and below is a list of what filaments I used. * Bambu Lab PLA Basic * Bambu Lab PLA Matte * Bambu Lab PLA Metal * Bambu Lab PLA Marble * Bambu Lab PLA Galaxy * Bambu Lab PETG HF * Bambu Lab ABS * Anycubic Silk PLA Dual and Tri-Color * SUNLU Silk Rainbow PLA+ * Eryone Silk Tri-Color PLA * Flashforge Color Changeable PLA * Elegoo Silk PLA * Polymaker ABS As far as performance goes printing numerous articulating dragons and the Midgard Serpent pictured above, the silk PLAs from the different manufacturers did not have any adhesion problems as long as you go with the recommended speed for the initial layer. I did adjust the settings in the slicer to utilize the new Bambu Cool Plate Super tack although the information sheet recommends the Cool Plate settings. I also adjusted the temperature manually to be 5-10º cooler because the information sheet recommends 45-55º C for PLA and 60-75º C for PETG and the recommended manufacturer temps for the ABS. As time progresses I will try other filaments like PA, TPU, and ASA. I would also like to mention that for the 2 weeks I was testing, the build plate was not cleaned at all which is a testament to the stickiness of this build plate. BiQU recommends soap & water for cleanup or even alcohol if you are printing PETG. With that being said, the build plate is so sticky that it can withstand an overnight power outage and resume in the morning with no problems on a cold PNW night. I am quite happy with that indeed. Energy savings with this build plate is going to be significant if you are running a printer farm and running everything 5-10º cooler as a whole. I did not test my particular energy savings on a meter but I am sure it will add up over time. Final Thoughts What can I say, BiQU did a great job with this plate and only time will tell if it is just as durable as the Bambu Lab build plates. If you keep it clean, it should stay very sticky and last a while in a heavy printing environment. My printers stayed running 24 hours a day for 2 weeks straight so it was thoroughly run through its paces. I like the overall texture as it leaves a very smooth finish on my builds and not too shiny. With all of my prints both large and small, I only encountered one problem with adhesion and its because I was printing with ABS and left the top of the printer open accidentally so it was a little too cool in the chamber and the large print warped and came off in one corner. Other than that no problems with adhesion. I give this product 5 stars for quality, performance, and value.
...
show more
Reviewed in the United States on December 12, 2024 by Lyn R
This plate works extremely well for PLA and PETG. There are some things that need to be done to keep it at max performance though. 1. Wash it with soap regularly, especially after you touched it with your fingers. Minor oils will cause adhesion to fail! 2. Ignore the recommended bed temperature written on the plate. Use whatever temperature the filament said on the spool. Blue color filaments will cause temporary stain on the plate, but will not transfer to the next print and will go away overtime (takes a very long time though). It’s a lot more durable than PEI with no ghosting from previous PLA prints. PETG will cause some temporary ghosting, but carbon fiber PETG does not. Regular washing with dish soap will solve all issues with adhesion and ghosting.
...
show more
Reviewed in the United States on March 30, 2026 by Amazon Customer
Size: H2D/H2S
Color: Frostbite-Original
Just a gentle reminder. Please wash the plate with soap and water then perform a calibration or re measure the z offset. Using on a H2S. The plate works great at 42C. Sticking is good without being obnoxious. Have used it for 6 prints with lots of small/large supports and it’s been really good. It’s a great value considering you won’t need any adhesives and you actually save a tiny bit on electric with the lower bed temps. It fit perfectly on a Bambu H2S but had to disable the bed checker which caused no issues. Zero issues with bed adhesion on first layers. The only question is how long will it last?
...
show more
Reviewed in the United States on March 22, 2026 by Keith
Size: Snapmaker-U1
Color: Glacier-Original
Love this Glacier CryoGrip Pro plate! It gives excellent adhesion for PLA and PETG at noticeably lower bed temps (around 45-55°C for PLA) than my stock textured PEI, which helps reduce warping on bigger prints and saves a bit on power. The subtle fine texture looks almost smooth but grips reliably without needing glue for most filaments. Prints release easily once the bed cools, and the pink color is a nice touch. Durable so far after dozens of prints — highly recommend as a versatile upgrade, especially if you print a mix of materials.
...
show more
Reviewed in the United States on March 26, 2026 by Michael Gilleran
Size: P1/P2/X1/A1
Color: Frostbite-Original
My new favorite plate. This plate has had 0 adhesion issues since day 1. It fits perfectly on the P1S. It's a durable metal plate that flexes but doesn't deform (You need that because of how well things stick). The print quality is excellent and the price is arguably better. I will have to look into all of BIQU's plates.
...
show more
Reviewed in the United States on April 6, 2026 by Breeezy