Search  for anything...
AUTOSAVER88

AUTOSAVER88 ATCC0058 Catalytic Converter Compatible with 2002-2006 CRV 2.4L Direct-Fit (EPA Compliant)

    • Based on 877 reviews
Condition: New
Checking for product changes
$119.99 Why this price?

Buy Now, Pay Later

As low as $20.00 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Friday, Jun 7
Order within 18 hours and 9 minutes
Available payment plans shown during checkout

Style: 2002-2006 CR-V 2.4L


Features

  • ATTENTION: This item doesn't ship to California & Colorado & New York, please confirm before purchase.
  • VEHICLE FITMENT: Compatible with 2002 2003 2004 2005 2006 CR-V 2.4L, please check the product description page below for details.
  • DIRECT FIT DESIGN: The flange is precisely-built to meet standard OE specifications without extra modification, and all installation holes are firmly and exactly fixed with attached gaskets and hardware.
  • HIGHER EFFICIENCY & QUALITY: Internal ceramic substrates contain ample metal catalysts and offer a larger surface area to fully react; Adopts heavy-duty T409 stainless steel shell that highly resists heat, rust, and corrosion for longer service life, no worry about bending or melting.
  • EPA CERTIFIED: EPA Federal Standard Certificated, all AUTOSAVER88's catalytic converters are stamped with an exclusive EPA number on the shell. AUTOSAVER88 offers a 5-year or 50,000 miles limited warranty, for any manufacturer defect.(NOTE: Professional installation would be highly recommended)

Manufacturer: ‎TWG


Brand: ‎AUTOSAVER88


Model: ‎ATCC00265658


Item Weight: ‎8.35 pounds


Product Dimensions: ‎29.13 x 7.87 x 6.69 inches


Country of Origin: ‎China


Item model number: ‎ATCC00265658


Exterior: ‎Metallic Finish


Manufacturer Part Number: ‎ATCC0058


OEM Part Number: ‎18160PPAA00, 18160-PPA-A00


Position: ‎Front


Date First Available: March 24, 2019


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Friday, Jun 7

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Old O2 sensors will work, hard to get out of old converter
Style: 2002-2006 CR-V 2.4L
This fit perfectly in my 2004 CRV. The front O2 sensor was almost too short to reach the fitting, but it worked. No engine lights on after first test drive. Warning, it is very difficult to get to the manifold area to mount this Cat. Make sure you have an angle grinder, rotary tool with grinder, and good hard metal drill bits to get the old cat off. If old and rusted, you will have to grind off and drill out bolts on manifold. Once old cat removed, all the parts that came with this product worked as expected. The springs on the mounting bolts are very strong. you will need to use a lot of muscle to get the bolt up into the manifold hole to mount the cat, but it can be done. This product saved me 100s of dolllars. ... show more
Reviewed in the United States on April 5, 2020 by Gwen
    • Hardware incorrect.
Style: 1997-2001 CR-V 2.0L
Review Image by Justin Rampersaud Justin Rampersaud
Fits my 2000 crv pretty good. Decent value for the cost. The hardware is too big. Either drill out the holes in the front pipe or order the correct stuff. My advice is order all the hardware and whatever Haslett you need ahead of time. I had to buy local and pay double the price online.
Reviewed in the United States on October 6, 2022 by Justin Rampersaud Justin Rampersaud
    • Some Modification Required
Style: 2002-2006 CR-V 2.4L
Review Image by DFDesign DFDesign
Review Image by DFDesign DFDesign
Review Image by DFDesign DFDesign
Review Image by DFDesign DFDesign
Review Image by DFDesign DFDesign
Review Image by DFDesign DFDesign
I purchased this to see if it would clear up my P420 code, and I am happy to report it has after 2 weeks of daily commuting. Out of the box, it appears to be a well made product for the price. It includes 2x spring bolts, 3x HHCSs for the resonator flange, 1x collector flange gasket and resonator flange O-ring. The welds are a little wormy, but have good penetration where it matters. The NE climate and salt brine winters will determine how well these hold up and if they used the correct weld wire. Once you have the existing CAT removed, compare all the new peices to the existing parts. I installed this on a UK built (to US specs) 2005 CR-V and found the following issues. 1.) Spring Bolts are M10s and existing are M8s. 2.) Collector gasket was about 1/4" oversized on the ID and OD. (I bought a different one.) 3.) The down pipe to Flange joint interfered with manifold diverter blade, so I ground it smooth on inside. 4.) The overall length was about 3/4" shorter than stock. My install experience may be a different than others, but my existing CAT was heavily rusted. 1.)The existing spring bolts came out fine, but couldnt be reused. Therefore, I chiseled off the factory tacked nuts from the collector flange. This was a pain since the K Member limits your access, but it is doable. The springs in this kit are signifactly taller than stock, so I needed to compress the spring inorder to start the nuts. Do NOT use the stock springs with these bolts, because they will not apply enough tension to seal. 2.) Another review said the O2 wires were barely long enough to reach the O2 bungs. I did not experience that issue, but anticipate they must have flip flopped the Upstream and Downstream O2s. Take pictures or match mark the O2s when removing them, so you put them in the correct location. 3.) The CAT to Resonator flange connection was fussed together with rust and the hardware was almost non existent, so I cut the bolts (nut side) with a resip saw and beat the flange apart with a 3lb sledge. The new hardware and O-ring gasket worked perfectly. Everything sealed up well and seems to be performing as expected. I wouldnt hesitate to install another one of these on a KA, and if you're handy and have some basic power tools at your disposal go ahead and give this kit a try. It is by far the most economical option available and likely gives your KA a 3-5HP gain. ... show more
Reviewed in the United States on January 17, 2021 by DFDesign DFDesign
    • Great budget option
Style: 2002-2006 CR-V 2.4L
Used this + the Walker 56194 to repair damage done from my catalytic convertor being stolen. Like other reviewers mentioned- the larger gasket (funnel shaped one) that goes to the manifold was too large. I also re-used the OEM spring hardware, so no comments on that. The Cat to resonator bolts worked well, as did the donut gasket. All appears to be good. My only tip when installing- if replacing, use DENSO 02 sensors. Hondas "like" these. I dont expect for this to last all that long. Would be happy to get a year out of it at this price point. But at least I can pass emissions and buy another year. As long as Cat thieves dont steal this one too. ... show more
Reviewed in the United States on December 23, 2022 by J. Ozu
    • The hardware ( gasket screws etc ) doesn’t fit on 2002 Honda CRV
Style: 2002-2006 CR-V 2.4L
I can use The hardware doesn’t fit on a 2002 Honda CRV. You’re need to buy for another provider. You waste money on the hardware.
Reviewed in the United States on March 18, 2024 by Jefferson
    • Just enlarge the holes a little with a drill to use provided hardware.
Style: 1997-2001 CR-V 2.0L
Review Image by Ellen Bone Ellen Bone
Review Image by Ellen Bone Ellen Bone
Has 2 bung holes foe O2 sensor. Original only had 1 in the rear, but it came with a good plug for the extra hole. Otherwise it fit great.
Reviewed in the United States on March 31, 2024 by Ellen Bone Ellen Bone
    • Hardware didn't match
Style: 2002-2006 CR-V 2.4L
The cat itself does the job plenty well for the price but beware. Get new hardware. The bolts for the manifold to cat were too big, I was in a pinch with no time so I had to step up the manifold bolt holes to fit the new hardware. After that was all said and done the springs were way too big and had way too much tension in them. This made them unnecessarily hard to install and has caused the manifold gasket to have premature wear causing an exhaust leak after a month of driving (because the gasket has gotten smashed beyond functionality). Save yourself the heart ache and either order separate hardware or get a different cat that comes with the right stuff the first time. ... show more
Reviewed in the United States on July 31, 2022 by Cory Reese
    • Works!
Style: 2002-2006 CR-V 2.4L
Works just fine and was able to clear my ECM code. Hasn't come back on since. Would absolutely recommend ordering a cat this way for the price and quality.
Reviewed in the United States on December 7, 2023 by Traci

Can't find a product?

Find it on Amazon first, then paste the link below.