AUTOSAVER88 Catalytic Converter Compatible with Chevy Silverado GMC Sierra 1500 1999 2000 2001 2002 2003 2004 2005 2006 Tahoe Avalanche Suburban Yukon Cadillac Escalade 4.3L 4.8L 5.3L (EPA Compliant)
Condition: New
Checking for product changes
Notify me when this product is back in stock
Buy Now, Pay Later
As low as
$35.00
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Unavailable
Recently Viewed
Style: For 99-06 Silverado 1500
Features
- ATTENTION: This item doesn't ship to California & Colorado & New York, please confirm before purchase.
- VEHICLE FITMENT: Compatible with 1999-2006 Chevy Silverado 1500 2500 / Tahoe / Avalanche 1500 / Suburban 1500, GMC Sierra 1500 2500 / Yukon, 2002-2005 Cadillac Escalade 5.3L, please check Garage Compatiblity or product description page below for more references.
- DIRECT FIT DESIGN: The flange is precisely-built to meet standard OE specifications without extra modification, and all installation holes are firmly and exactly fixed with attached gaskets and hardware.
- HIGHER EFFICIENCY: Internal ceramic substrates contain ample metal catalysts and offer a larger surface area to fully react; Adopts heavy-duty T409 stainless steel shell that highly resists heat, rust, and corrosion for longer service life, no worry about bending or melting.
- EPA CERTIFIED: EPA Federal Standard Certificated, all AUTOSAVER88's catalytic converters are stamped with an exclusive EPA number on the shell. (NOTE: Professional installation would be highly recommended)
Manufacturer: TWG
Brand: AUTOSAVER88
Model: EFGH6814HI9256
Item Weight: 13.2 pounds
Product Dimensions: 40 x 18.9 x 9.5 inches
Item model number: EFGH6814HI9256
Is Discontinued By Manufacturer: No
Exterior: Metallic Finish
Manufacturer Part Number: EFGH6814HI9256
OEM Part Number: 208A28J110, 208A28J112, 208A2-8J110, 208A2-8J112
Position: Front
Date First Available: January 10, 2017
Frequently asked questions
This product is currently out of stock. Please check back later for shipping info.
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Easy installation for an exhaust system. Alignment was like factory installed exhaust. Shipment was on time.
Reviewed in the United States on November 24, 2024 by Ken K
I have a 99 chevy Silverado Z71 5.3 285287 miles on the ol girl an love her like the day I bought her off the show room floor .She has been faithful like all Chevys are .Unfortunately she started losing power .Replaced the intake manifold Gasket cause on this motor there notorious for leaking air on the intake manifold .still didnt solve the problem ,so I changed the fuel pump because the fuel pump pressure was at 42 psi an this motor needs 55 to 65 psi ,so installed a AC DELCO fuel pump ran a bit better but still didnt have the power it use to have .Codes were going off about the 02sensors which I had replaced recently .I notice that every time I drove the truck the temperature was running 195 to 200 an was very hot underneath the truck thats when I realized that the catalytic converters were stopped up ,So thats when I ordered these catalytic converter from Amazon an TYG or AUTOSAVER88 .I read reviews on how hard it was to install these an an things to be aware of which I found to be totally untrue . I order them Monday night an was here Wednesday Yes thats right 2 days an on my porch . So pull the truck in to my garage lifted it with floor jack just enough were I could roll underneath it with a creeper an have plenty of room ,this job start to finish took me 2 hours an 15minutes to install .Thats right that easy . I removed the O2 sensors first, then I sawzalled the catalytic converters off just like the thieves do an unbolted the existing pipes which was so easy ,The new Catalytic converters come with new studs gaskets and nuts . I didnt use any of the nuts because all the nuts that came off my manifolds were in great shape .There is no reason to remove anything like center brackets or the center transmission brace. You do not need to be a genius or a certified tech .It is a very easy job no need to over think this job .BTW my ol Chevy runs great no more engine lights and temperature is back down to 160, with the A/C on an no need to buy a knew Chevrolet pick up .If your truck is losing power an getting hot do your self favor an buy these Catalytic converter , Yes I did use a scanner but many times the scanner will give codes that are not always 100% correct especially when it comes to a stopped up catalytic converter .Im glad I replaced everything that I did .but most of all the catalytic converter. There was only one issue an that is were the rear O2 señsor goes on the passenger side ,Manufactures must know that its in a bad spot an must be addressed ,but it will work . I would definitely recommend this to anybody who needs this part. The quality is excellent an welds are magnificent
...
show more
Reviewed in the United States on August 23, 2023 by Moses Flores
Removing the old section of exhaust and replacing it with this one wasn't too difficult. Not sure about the capability of the catalytic converters but it hooked up just fine. Pros: -Installing this had a few issues as the O-rings as they like to move freely. <might want to use something to stick them in place while attempting to install it. -The parts fit well and bolt in place where they should. -O2 sensors threaded right and where they should be. Cons: -Main issue is the nuts and bolts they provide. They are cheap and very soft and easily stripped. <reuse the old ones or buy better ones. -Where the two pieces join did not come together to form a solid seal. The flared (left) side has a cut that runs down it (to allow it to flare out) and that cut is too long for the other side to completely seal the length of it. As such there is a 1/4 inch gap right in the middle of the the truck for exhaust to leak out. <It is an easy fix to simply puddy up, small weld, or install a piece of metal to seal it. But could have been just as simple to not cut the thing that long to begin with.
...
show more
Reviewed in the United States on May 5, 2024 by Jeremy W.
Great product,saved me a bunch of money from OEM !!
Reviewed in the United States on October 22, 2024 by John Abbondandolo
The flanges, all 3, did not fit correctly against stock exhaust manifolds and in the rear by the muffler. Each had welds that prevented a flush fit, in fact they were not even close. To grind them would take too much metal away and weaken the area, probably even create holes in order to achieve a flush fitment ( I didn't try because it was visually obvious). Additionally, the welds that were made on this cat assembly were not very good. They had slight cracks on the edges and even a few gaps in the runs. What sucked about all of this is that I did not realize the flanges would not mate properly until I HAD SPENT A COUPLE OF HOURS GETTING THE PIECES UP IN THE TRUCK!! How could I know until I actually mated the pieces together? This was very annoying and disappointing. I did not take pictures because I did not anticipate submitting a review, I rarely ever write reviews, seriously, maybe only a few in my life. I was so mad with this product however that I felt compelled to do so. It cost me time, money, and much frustration. I have since used the junk assembly as scrap for welding practice and project metal, that is all it was good for, at least for me. Oh, to top it all off, the hardware that comes with the kit, specifically the nuts and bolts, are totally cheap, and substandard for this application. Finally, the instructions they sent were ridiculous!! I did not need them, but I provide this information for people who may need better guidance. You will not get adequate guidance from the instructions included in this kit. This product could be great for the price, but the one they sent me TOTALLY SUCKED! Maybe other people had better experiences, I certainly did not.
...
show more
Reviewed in the United States on July 4, 2022 by William Skinner
Installed in a 2003 suburban LT with 5.3 lm7 (non flex fuel) It’s a little tight mounting to exhaust manifolds. The flange holes on driver side could be slightly larger. But took my time and it did fit. I didn’t use the u clamp provided I bought a SS band clamp to connect Y pipe section. Also the one O2 senor down stream after cat that’s along pass side frame rail is tight to frame. I’d suggest having a 90° adapter handy to go in that location. This has been on my truck for apprx 400+ miles and cleared my PO420 cat code. For the money I would buy this part again. I have 4 stars for mileage only cause it’s still early. 4 stars for installment cause it is tight. But if you open up the flange holes it will make it easier. Get the 90° adapter for O2 if your concerned for clearance.
...
show more
Reviewed in the United States on July 24, 2021 by Bill