ANYCUBIC Wash and Cure 3 Plus Station, Size-Upgrade Wash Cure Machine with Gooseneck Lights, Dual-Layer Design and IPA Saving, for Anycubic Photon Mono M5 Saturn LCD/SLA/DLP 3D Printer
Condition: New
Buy Now, Pay Later
As low as
$25.00
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
15 left in stock
Arrives
Friday, Aug 1
Size: M-Wash & Cure 3 Plus
Features
- Higher CompatibilityAnycubic Wash and Cure 3 Plus upgraded the washing size 8.97''x5.03''x10.23''. And compared with Wash & Cure Plus, the washing volume of the washing basket is increased by about 13.4% to 7.6L, which is suitable for more LCD 3D printers like Photon Mono M5s, Photon Mono M7 Pro, Saturn 3/4 series or other 10.6 inches and below.
- Flexicure Gooseneck LightDue to the innovative Flexicure gooseneck light design, Wash & Cure 3 Plus can increase the energy value by 30,000uW/cm2* in the 1~3cm irradiation range, which greatly enhances the solidification effect of the top of the model, the figure skirt, and other subtle areas, plus the light tube can be twisted, making it more convenient to use
- Better Curing EffectThe Anycubic Wash & Cure 3 Plus features a brand-new arrangement of lamb beads combined with a lens light source. It offers a 20%* improvement in curing uniformity than previous generation Wash & Cure Plus. This results in a more thorough and comprehensive overall cure of the model, ensuring better quality and consistency.
- Efficient IPA utilizationThe dual-layer PP material cleaning basket supports washing with platform and rust-resistant. It is equipped with two adjustable heights of 150 mm and 250mm allowing printing platforms from 6.6 to 10.6 inches, maximizing alcohol usage efficiency.
- Dual-layer CuringA specially designed double-layer curing platform increases the number of models cured per cycle and markedly improves curing efficiency.
Brand: ANYCUBIC
Material: Polycarbonate, Aluminum Alloy, ABS
Product Dimensions: 16"D x 23.62"W x 15"H
Compatible Devices: Laptop
Operating System: Linux
Product Dimensions: 21.65 x 13.78 x 15.75 inches
Item Weight: 15.27 pounds
Item model number: Wash and Cure 3 Plus
Date First Available: September 21, 2023
Manufacturer: ANYCUBIC
Country of Origin: China
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Friday, Aug 1
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Size: S-Wash & Cure 3.0
Over all, this is a very good product. However, to cut to the chase, I prefer using an ultrasonic cleaner and a homemade UV curing chamber. Here are a few of the pros, cons, and reasons to back up my preferences. Pros: Simplicity (Two machines in one) Pretty good at washing parts (reason for "Pretty good" explained later) Amazing at curing parts (the UV LEDs are super powerful) Attention to safety (the lid is UV blocking and there is a safety switch that shuts down the machine if the lid is removed) Simple user interface Works with a pretty small amount of cleaning fluid (there is an included bracket that lowers the bed to the surface of the liquid) Cons: Price (see below for further detail) Can't use both the cleaning and curing features simultaneously In all, this is a very useful piece of equipment. However, let's go into further detail on a couple of the points made above. Let's start with my comment that it does a "Pretty good" job at cleaning. Though the cleaning system does a surprisingly decent job at removing excess resin from the surface of the prints, it lacks the penetrating capability of an ultrasonic cleaner. With an ultrasonic cleaner, the part gets cleaned inside and out. This is important because resin printers can't really print infill. This means that either you print with 100% infill (i.e. solid) or no infill (i.e. hollow). Because the ultrasonic cleaner uses, well, ultrasonic waves to clean, these waves can penetrate the walls of the print and clean the inside as well. And finally, let's talk price. Though this machine is pretty good at what it does, I don't think it is worth the $150 price tag (as is the price at the time of the writing of this review). I say this because of the all the other methods of doing the things this machine does (sometimes even better) but at a cheaper price. For example, I can get an ultrasonic cleaner (big enough to put the entire build plate into) for around $80 and a string of UV LEDs for $10. So, with a little DIY (to build the curing chamber) I can have equivalent capability for $60 less. In conclusion, this is an all around good machine. I believe that you can make something better, but, since this is the only all-in-one cure/wash station I can find, I would recommend it to anybody that doesn't want to mess with the DIY side.
...
show more
Reviewed in the United States on November 15, 2020 by Noah J
Size: S-Wash & Cure 3.0
The Any Cubic Wash and Cure Machine is a great addition to any SLA type of printer. Its ease of use simplifies a messy process by providing different ways of washing the printer model. There are 2 brackets, one static and the other adjustable allowing you to position the build plate and model in the optimum position to be washed with the cleaning fluid of your choice. (I use IPA) In addition a basket is provided to give additionally flexibility to the cleaning routine. The machine itself is constructed solid with a metal base and removable transparent cover. The wash setting allows the user to choose between 3 timed setting. During the cycle the washer will slow down and reverse directions to better clean the model. The large air tight wash container has an agitator that spins the cleaning fluid over the model. Once clean the wash container may be sealed and removed for the curing process. Once the wash container is removed the curing platform may be attached and the model placed for curing. There are 3 timed curing cycles as well. As a safety feature the Wash and Cure Cover must be on the machine for both washing and curing. I have found that this machine reduces my production cycle time by not only washing and curing my model but doing so with little to no mess saving me time I can use elsewhere. Photo of Wash and Cure machine along with Any Cubic Proton S and Photon Zero printers in there temporary location. Jim Jim Chapman / Sarelda Marshall Jimbo's Speed Shop
...
show more
Reviewed in the United States on September 4, 2020 by Sarelda Marshall Sarelda Marshall
Size: S-Wash & Cure 3.0
Although I'm pretty adept at FDM printing, I'm very new to resin (SLA) printing. I knew when I decided to dive into SLA that I would want a nice setup for washing and curing my prints. I also wanted something that looked good too. I didn't just want a cardboard box with a light over it. I originally couldn't justify the price of the AnyCubic Wash & Cure, so I scoured Amazon for parts to make my own "nice looking" cure station. By the time I found a setup I liked, I realized that I was almost spending just as much, so I went ahead and bought the AnyCubic. Honestly, I'm glad I did. This thing makes washing and curing so easy it's worth the price. I set it up on my workstation with a silicone mat and some paper towels and I was in business. All I have to do is throw my build plate into the AnyCubic and the machine washes both my print AND my build plate (bonus). I also have the option of setting the print in the provided basket and washing it that way too. Once it's done washing, I set my print on a paper towel, dry it off, swap out the container for the platform on the AnyCubic and set it to cure. PROS: * Can be used with just about any resin printer. It works just as well with my QIDI Shadow as it does for AnyCubic's resin printers. If you have a super large print (like something that could be printed on the S-Box or the Saturn) you would likely have a problem with the size, but most prints will fit in this machine. * Comes with extras that allow you to wash on or off the build plate. * Seriously easy to use. * Timer options. 2, 4, and 6 minutes. For both washing and/or curing. * Stop button so you can stop mid-wash or mid-cure if needed * Excellent washing. I mean it, this sucker creates a tornado. It gets in those hard to reach spaces. And it changes spin direction halfway through the wash. * Safety - it only works when the lid is on. So you don't have to worry about being blinded by UV light if you accidentally start it without the lid on (ask me how I know) * Can handle any liquid. I've used IPA, Mean Green, Simple Green, and Denatured Alcohol. It works great with all of them. (Denatured Alcohol works the best for me.) * Looks and feels great. It has a minimal foot print and can easily be placed next to the resin printer on an IKEA Lack table (you FDMers out there know what I mean, right?) It's also solid. It doesn't feel like cheap plastic. Not even the lid. * They have their own Facebook Group with active AnyCubic employees CONS: Not a lot, to be honest, but if I had to list any... * Longer time options. Maybe a 10 or 12 minute option added. * Fingerprints, ammIright? * I'd love for it to be a tad bigger. Or hopefully have AnyCubic offer another larger-sized station. I plan to eventually upgrade to a larger resin printer, but I'm hoping someone (*cough*AnyCubic*cough*) will come out with a good super-sized wash and cure station first. * Additional containers. I'd love to have a second container to rinse my prints without having to swap out the liquid (they are already offering this in the Facebook group, and hopefully will be easily available on Amazon soon). All-in-all I highly recommend it. It's worth it. It really is.
...
show more
Reviewed in the United States on August 25, 2020 by Kaiskii Kaiskii
Size: S-Wash & Cure 3.0
Washes very well. I love the large volume
Reviewed in the United States on June 6, 2025 by Amazon Customer