2 Stroke 18HP Outboard Motor Engine, 246CC Long Axis Outboard Boat Engine Motor with Fuel Tank, Mud Motor Kit w/Water Cooling, Water Power Equipment for Width Less than 4.9 Feet Boat

Features

• Easy to OperateThe manual start function allows you to operate easily by pulling the start rope and opening the speed switch on the handle. Its long non-slip handle(20 inches in length) is easy to grasp. The red stop button allows you to stop the engine by pressing it for a few seconds.
• Strong Power 2-stroke 18hp engine (4500 to 5500rpm) provides strong power for you to drive fast and save a lot of time and energy.
• Excellent Load-bearing Capacity With solid aluminum alloy material and a powerful engine, the outboard engine has a maximum load of 2204 pounds to meet different needs. (The heavier the load, the slower the speed)
• Excellent EnduranceLow fuel consumption, efficient two-stroke motor, and large capacity fuel tank (6.34 gallons) provide you with a long endurance to meet the needs of short/long distance travel.
• Excellent Heat DissipationMany cooling holes and water cooling systems provide excellent heat dissipation to prevent the engine from burning out after a long time of use.
• Flexible SteeringForward, neutral and reverse gears, and a 360-degree steering function allow you to flexibly control the direction of the ship.
• Easy Speed RegulationStepless speed change and constant speed cruise function make it easy for you to adjust the running speed and stable navigation at a constant speed to bring you a more comfortable user experience
• ApplicationThis outboard motor is suitable for small ships with different materials(width less than 4.9 feet and length less than 19.7 inches), such as inflatable boats, iron boats, plastic boats, fiberglass boats, and wooden boats. It is widely used in fishery, aquaculture, outdoor exploration, etc.

Description

DescriptionThis kind of outboard motor is suitable for small ships of different materials (the length of the ship is greater than 3 meters, the net weight of the ship is greater than 60kg, the load of the ship is less than 1000kg), such as rubber boats, iron boats, plastic boats, glass fiber boats, wooden boats, etc. Widely used in fishery, aquaculture, outdoor exploration and other fields.Key FeaturesHigh-quality Material: High-quality aluminum alloy has high hardness, , so it can serve you for a long time.Customer Service: We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible.DetailsThree-blade Propeller: The three-blades propeller with a streamlined design provides you with greater power.Silencer Cover: The silencer cover can absorb the noise generated by the fan through the internal sound-absorbing material, thus providing a quieter working environment.Anti-swirl Plate: The anti-swirl plate can effectively reduce the turbulence of the waves and avoid water-wetting clothes.Gear Oil Filling MethodThere is a screw on the gearbox, unscrew the screw to add gear oil. Gear oil is not filled before each machine leaves the factory, so please fill gear oil when using for the first time. After that, add according to personal use, and check every ten hours.SpecificationMaterial: Aluminum AlloyColor: BlackModel: 18HP Horsepower Long AxisDisplacement: 246CCGear Ratio: 2.08 (27:13)Number of Cylinders: 2Speed: 4500-5500RPMGear: F-N-RRefueling Method: 92 Unleaded Gasoline is RecommendedOil Tank Capacity: 24L/6.34galLoad-bearing Capacity: 500-1000kg/1102-2204lbsIgnition System: CDICooling System: Water CoolingControl System: Tiller ControlStart System: Manual StartPropeller Specification: 23.5cm/9.25in (Length) 20.3cm/8in (Diameter)Suitable Stern Plate Height: 45cm-55cm/17.721.7inCylinder Diameter Stroke: 56mm/2.2in50mm/2inRecommended Engine Oil: 2 Stroke Engine OilMixing Ratio: Fuel: Oil = 50:1Trim and Tilt System: Manual TiltNet Weight: 41kg/90.38lbsGross Weight: 53kg/116.84lbsPackage Size: 1337138.5cm/52.42815.2inProduct Size: 87.333.2117cm(34.413.146.06inch)Package Included1x Outboard Motor1x Flameout Rope1x Oil Pipe1x Sealing Ring1x Paper Pad1x Spark Plug1x Start Rope1x Water Pump Impeller1x Cotter Pin1x Fuel Tank1x English ManualOther ToolsNotes1. The two-stroke outboard must use a mixture of No. 92 gasoline and two-stroke engine oil.2. The volume ratio of gasoline and oil during the running-in period of the new machine is 25:1.3. After the running-in period, the volume ratio of gasoline and oil is 50:1.4. Special attention: gasoline and engine oil must be pre-mixed and stirred evenly, and then poured into the fuel tank.5. The outboard motor must be started in water, do not start the engine on shore.6. Loosen the vent screw on the fuel tank cover counterclockwise when starting.7. When the outboard motor is started, the emergency flameout rope should be inserted, and the other end should be placed on the wrist or belt.8. The running-in period is about 10 hours or a month, and during the running-in period, do not drive with a high accelerator.9. Replace the gear oil after the running-in period, and the second replacement time is after 100 hours or about six months.10. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.

Brand: Goudergo

Color: 18HP 2 Stroke Long Axis

Material: Alloy Steel

Engine Displacement: 246 Cubic Centimeters

Engine Type: 2 Stroke

Manufacturer: TTOCTE

Brand Name: Goudergo

Recommended Uses For Product: For Sport Utility Vehicles, For Fishing Boats

Mounting Type: Engine

Fuel Type: Gasoline

Maximum Horsepower: 18 Horsepower

Fuel Capacity: 24 Liters

Operation Mode: Manual

Voltage: 246 Volts

Engine Displacement: 246 Cubic Centimeters

Engine Type: 2 Stroke

Item Dimensions D x W x H: 34.4"D x 13.1"W x 46.06"H

Material Type: Alloy Steel

Color: 18HP 2 Stroke Long Axis