12V Brush Electric Trolling Motor,661lb Thrust Pure Copper Outboard Boat Motor,5F/3R Speed, Telescopic Handle,Adjustable Depth, Battery Monitor,for Kayak Jon Boat Fishing Inflatable Dinghy

Features

• 661 lbs of Thrust & Solid Copper Motor: Electric trolling motors. The solid copper motor delivers powerful thrust (661 lbs). It effortlessly cuts through strong currents, operates at low temperatures, and wont disturb the fish.
• 5 Forward Speeds + 3 Reverse Speeds: boat engine 5 forward speeds / 3 reverse speeds. Freely adjust depth, angle, and height to suit your small boat.
• Real-Time Battery Level Display: trolling motors The top LED light provides an at-a-glance view of remaining battery power. A built-in circuit breaker prevents power surges and short circuits.
• Durable and Reliable: The aluminum mount of this kayak motor kit resists deformation. Reinforced clamps securely fasten the motor to the transomit will never come loose.
• Easy Installation: This electric outboard motor kit comes with all necessary accessories and features simple, straightforward operation. No additional tools are required. Installation takes just a few minutes.

Description

The trolling motor is made of pure copper, which has excellent electrical conductivity, thermal conductivity, ductility and corrosion resistance. Installation 1. Tear off the sticker at the spring on the handle. 2. Take out the handle, and align the handle with the interface at the inner shell of the handle. 3. Press the handle spring with one hand and push the handle in with the other hand. After a crunching sound is heard, the handle is installed. 4. Take out the cylindrical card pin and insert it into the round hole of the drive rod (note that the length of both ends needs to be consistent). 5. Align the back of the propeller with the card slot and the card pin horizontally, and then tap into the propeller with force. 6. Put in the card flap, then screw the nut to complete the installation. 7. Take the fins out of the box and insert them into the fin slot. 8. Put the included screws into the screw holes of the fins and put the nuts into the other end. Hold them down. 9. Then tighten the screws with the Phillips screwdriver. Notes 1. Please read the attached manual completely before use. And pay particular attention to the safety instructions included. 2. Don't start the motor on the bank. If you want to test the motor, it should be done in the river. 3. Don't use the motor when no water comes out of it, and then check whether the pump impeller or the water outlet is blocked. 4. Do not switch gears too quickly. You should switch from one gear to another. 5. Be sure the switch is in the OFF position before the connection to the battery. 6. Always disconnect power when replacing the propeller, removing debris around the propeller, charging batteries, transporting a boat, or when the motor is not in use. 7. Remember always disconnect from batteries once the motor leaves water as a rotating propeller can cause personal injury. 8. Electrical arcing near the battery could ignite hydrogen gas and cause the battery to explode. 9. Please wash the motor with freshwater, so that it can greatly reduce the possibility of corrosion. 10. All trolling motors have noise. And the noise of this motor is the same as a motorcycle, which is normal. 11. The trolling motor is recommended for thrusting small boats under 200kg/440lbs. 12. You must prepare a boat motor bracket or lifting board on your boat. 13. The battery is not included in the package. 14. Please choose 12V 100A battery so that the maximum power can be guaranteed for 3 hours of continuous operation.

Brand: IOENC

Item Weight: 22 Pounds

Color: 40LB

Material: Aluminum, Copper

Engine Type: Electric

Engine Type: Electric

Mounting Type: Transom Mount

Fuel Type: electric

Maximum Horsepower: 0.55 Horsepower

Item Weight: 22 Pounds

Color: 40LB

Material Type: Aluminum, Copper

Brand Name: IOENC

Manufacturer: IOENC

Manufacturer Part Number: Trolling Boat Motors

Model Number: electric outboard motor

Manufacturer Warranty Description: 2 years

Unit Count: 1.0 Count

Included Components: 1*Trolling Motor 1*Power Propeller 1* Circuit Breaker Protector 1*Battery Clamp 1 Set of Screws 1*English Manual