Search  for anything...
Posdou

10 Male and 10 Female 12v DC Power Jack Adapter Connector for Led Strip CCTV Camera

  • Based on 1,112 reviews
Condition: New
Checking for the best price...
$5.99 Why this price?
Save $2.00 was $7.99

Buy Now, Pay Later

As low as $1 / mo
  • – 4-month term
  • – No impact on credit to apply
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout.

Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Free shipping on this product

FREE 30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Tuesday, Jun 16
Order within 18 hours and 34 minutes
Available payment plans shown during checkout
Protection Plan Protect Your Purchase
Checking for protection plans...

Recently Viewed

Features

  • 10Female +10Male Pack 2.1 x 5.5mm CCTV Camera DC Power Plug Connector.
  • Simply & Professional
  • Internal diameter 2.1mm
  • External diameter 5.5mm
  • This CCTV Camera DC Power Connector will provide a great connection

Description

Size: 2.1 x 5.5mm CCTV Camera DC Power Plug Connector. Internal diameter of the plug: 2.1mm External diameter of the plug: 5.5mm It measures approx. 1.5" long, 0.55" wide, 0.5" thick. Weight : 7.5g/pcs Features: This CCTV Camera DC Power Connector will provide a great connection. DC Power Plug with plastic construction and strain relief. This 2.1 x 5.5mm Power Plug features one power connector end DC plug male to another end terminal for CCTV camera connected. It's easy installed to Single Color of LED lighting system. Reliable connect, good performance. Simply & Professional appearance for power cabling. Easier for camera installation, save time and more securer cable connection. No electrical tap, No splicing, no crimping, but only a small screw driver. Power Plug features one power connector end DC female to another end terminal for CCTV camera connected. Support power for CCTV camera accessories, such as video balun. Package Inclueded: 10 Female + 10 Male 2.1 x 5.5mm DC Power Jack Adapter Plug Connectors

Compatible Devices: CCTV Camera


Connector Type: Auxiliary


Color: Green


Brand: Posdou


Finish Type: Plastic


Package Dimensions: ‎8.07 x 4.96 x 0.63 inches


Item Weight: ‎2.4 ounces


Manufacturer: ‎Posdou


Item model number: ‎CECOMINOD021502


Is Discontinued By Manufacturer: ‎No


Date First Available: ‎April 25, 2016


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Tuesday, Jun 16

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • not as pictured, new type plugs are NOT better
Review Image by S Eckert S Eckert
The main product photo shows a ribbed and open slot for the wire receptor. The parts I received have a smooth plate and a spring clip that the wire has to push out of the way. See my photo for the comparison. I want the old kind! They work with small gauge stranded wire, and these don't. It seems every company uses the same factory and churns out the same junk. Anyone know where to find the old model? See Item B079RBL339 for the Chanzon part I finally settled on. ... show more
Reviewed in the United States on September 3, 2019 by S Eckert S Eckert
    • Good quality, good price
Many sellers sell this very same item, and I've seen small variations so there are also at least a few manufacturers. These work well and were the lowest price I could find at the time. The small cinch screws can take either a small Phillips or slotted screwdriver... I've found that a slotted screwdriver works best as it gets a more secure grip on the screw head. I use these as temporary connections for testing light strips prior to and during installation. I am not a fan of clips and plug connectors for permanent installations because they can be intermittent and almost always fail eventually, causing you to go looking for the bad connection (however, after you find the bad connection it's easy to fix). I prefer soldering all connections because that is problem-free and permanent. Some light strips come with a plug pre-installed so all you have to do is connect it to a power source to check out the light color and find any defective LEDs. If there is no plug, no problem - just temporarily install one of these plugs to do the testing. Same with power sources. To test amperage draw, simply build a simple test splice using a male and female and two short lengths of wire. Cut one of the wires in the center to connect in series to a multimeter set to test amps. Actually, even though I said I solder all connections, I do use a male/female connection between the power source and the light strips so I can easily insert my test splice to check voltage and amps in the future when needed. Everything I said applies to CCTV installations as well as LED light strips, or any other 12 VDC application. ... show more
Reviewed in the United States on September 9, 2018 by Panfryd
    • Ok for price
Fast delivery (3 days with Prime during Covid). Checked for continuity and shorting when item arrived. Out of the ten pairs, only one male connector had continuity defect (negative terminal not connected to barrel). Overall, what do you expect for the cheap cost? Have not tested for current load yet as I have literally just received these. I suspect based on the mediocre quality control that they would not perform to stated amperage. However, I am planning to use under minimal load current anyway (<0.5A or <500mA). Would test each before using with a multimeter or continuity tester just to save on later hassle trouble shooting your device after installation (especially if planning to use in relatively difficult to reach location). Based on other reviews, buy a little more than you need as a certain percentage will be DOA. Anyway, for my use, 19 out of 20 pieces (9 of 10 pairs) were Ok. Ok odds to me given how inexpensive these are. Inexpensive price for a cheap product (what do you expect, lol!) ... show more
Reviewed in the United States on July 1, 2020 by Susan
    • Good product....bad quality control.
This is basically a good product. I think the quality control should be tightened up. Out of the 10 male connectors one of the units was faulty and the wire securing mechanism would not work. Out of the 10 female connectors two of the units were faulty and the wire securing mechanism would no work. I would have returned them but I was in a bind to get my job done and had to use most of the rest of them. Thank goodness that I ordered more than I needed. I suggest that, if you are purchasing this product buy extra. ... show more
Reviewed in the United States on May 17, 2021 by The Warsaw Wizard
    • I used it for a solar power lamp
Review Image by Sandra Cruz Amador Sandra Cruz Amador
Great product, easy to install and serves the purpose. Usually it is used for CCTV systems but I used it to interrupt and connect a solar power lamp. I have two lamps in the stairway, one without any interruptor that works up to 10 hours since dawn and the other in which I installed the product, that I connect once the other is off. The lamp's solar panel is located at our house's roof (I can't reach the switch that is located in the back of the solar panel to turn it on/off), that is why I need an accessible interruptor, and I found it. I tried to install an inline switch, but it was very difficult since the line is very narrow and it have only a black and red wires inside, and when I tried to peel the red and black wires to uncover the copper and then pull the covers, I was almost left without enough copper to complete the installation in a safety and lasting way. This product provides one inlet for the red wire (I used the inlet that is marked with the positive sign (+), and another inlet marked with the negative sign (-) which I used to install the black wire in both terminals. They are secured in place with small screws that I adjusted. The lamp is working as I wanted! I like the solar power energy ⚡ very much, but the a solar system for the house which include 13 solar panels, and a tesla battery among other elements cost around $25,000. We already have solar power water heater, gas stove, gas clothes dryer, LED lamps, four inverter A/C's, and energy saving refrigerator, microwave and washing machine that we bought thru the years before the solar powered systems exist for domestic installation. ... show more
Reviewed in the United States on February 16, 2021 by Sandra Cruz Amador Sandra Cruz Amador
    • Quality Made Parts
Ksmile 10 x Male + 10 x Female 2.1x5.5mm DC Power Cable Jack Adapter Connector Plugs are made with accurate tolerances for use in your power projects. The screws turn nicely and the male to female power plugs fit great as well. Bought these to use in my 960P camera system as I added different 2.6mm lense cameras that didn't come with the original 8 channel system. Using dielectric grease at all the connection to prevent any corrosion that may try to penetrate the metal do to high humidity environments. ... show more
Reviewed in the United States on April 18, 2019 by Joseph A. Holmes
    • 12V circuits barely made any connections
I bought these to re wire my kids 12V power wheels batteries so they're all the same. When wired up and connected properly, the circuit was not made, at first I had to rotate the male and female until one was made, then it rotated again disconnecting it. Used larger gauged wire, but that shouldn't have made any difference as they did fit and I insulated each wire. Very disappointing as I took the time to make sure they would not short out and they still didn't work. ... show more
Reviewed in the United States on October 18, 2021 by Dan Kirkpatrick

Can't find a product?

Find it on Amazon first, then paste the link below.
Checking for best price...