X-BULL Winch-10000 lb. Load Capacity Electric Winch Kit -12V Synthetic Rope Winch,Waterproof IP67 Electric Winch with Hawse Fairlead, with Wireless Handheld Remote and Corded Control Recovery

X-BULL is a global off-road equipment brand established in 2012. dedicated to building reliable products for real off-roading conditions.From our featured winches and recovery gear to essential off-road accessories, every X-BULL product is designed with one priority in mind: to perform when it matters most.Today, X-BULL products are trusted by off-road enthusiasts across 5 continents, serving a growing community of over 3,000,000 users worldwide. Like many off-roaders, we were driven by the need to go further—beyond paved roads, beyond comfort zones, and into places where conditions are unpredictable. Out there, we learned a simple truth: your gear matters. Brave — Because real off-roading demands confidence in the face of uncertainty. Explore — Because the best journeys begin where the road ends. We design recovery gear with one priority: dependability in real-world conditions. INSTRUCTION：To pull out the rope, move the clutch handle to the released position. Re-engage the clutch by moving the clutch handle to the engaged position. To pull out the rope, move the clutch handle to the released position, slide the loop of the hook strap over the hook, then pull on the hook strap to pull out the rope. TIPS：Leave at least five full turns of wire rope on the drum.To pull out the rope, move the clutch handle to the released position, slide the loop of the hook strap over the hook,then pull on the hook to pull out the rope. If the winch is overloaded, the steel shell can protectthe winch body well. Black frosted paint will not rust. DUTY CYCLE Avoid damage to the Winch by not winching for more than the prescribed duty cycle time. The Duty Cycle defines the amount of time,within a 15minute period,during winch a Winch can operate at its maximum capacity without overheating. For example,this Winch with a 5% duty cycle at its maximum load must be allowed to resent for at least 14 minutes,15 seconds after every 45 seconds of continuous operation. Motor is powered by a 12 volt battery. When the winch is connected to the control box, make sure that the protective sleeves on the wires are in place. The wire must not touch any conductors to avoid short circuit Three-stage Planetary Gear System/Super Big Power,High Tensile Synthetic Cable/Power In & Power Out Motor for Positive Load Control/Braker for Maximum Safely Free Spooling Clutch for Fast Wire Rope Payout/Heavy Duty Sealed Contactor/Wire/Wireless Remote Control Model for Easy Operation When the green light is on, it is the wireless state When the red light is on, it is the wired state Black Battery NEG “-” wire and Black Solenoid Ground wire will share same Terminal Post Synthetic winch rope is made of 12 fine stranded rope Have the characteristics of high magnetic inductive melting poi-nt, high temperature resistance I only received the wired remote, the wired remote is missing. Wired and wireless remote control is integrated. Motor runs but Winch Drum does not turn Free Spooling Clutch not engaged. Motor does not turn on Rocker Switch not connected properly/Loose battery cable connections./Defective Rocker Switch./Defective Motor./Solenoid sticking. Motor overheating. Winch run time too long.