Wireless Camera Remote Shutter Release Control for Canon Replace BR-E1

AODELAN Wireless Remote Control BR-E1A enables the camera operations to be performed wirelessly, including shooting still photos and videos, focusing with AF and zooming (the feature of zooming only works when using with the power zoom adapter (sold separately). PLS NOTICE that AODELAN canon wireless remote control JUST COMPATIBLE WITH EOR RP/ EOS R/ R5/ R6 / 6D Mark II / 77D / 800D(EOS Rebel T7i) / 200D(EOS Rebel SL2) / M50 / PowerShot SX70 HS. HOW TO USE (Please send us if you have any questions) 1. Set the camera for still photo shooting: 2. For video shooting: It is small size,you can hidden it in your hand.And with Lanyard sling you can hang it around your neck or camera ,it is easy to carry and would not be easy to lose. This wireless remote control operating range up to 10m/32.8ft, you can shutter release in any direction,you dont have to aim the remote at the camera. 1.Camera remote control BR-E1A besides shooting still photo (support immediate release and 2-sec delay release.) also can shooting videos. 2. Compatible with power zoom Adapter,but pls notice that zooming only works when using with the Canon PZ-E1 Power Zoom Adapter (NOT INCLUDE), and movement of the EF-S 18-135mm f/3.5-5.6 IS USM lens. 3.It was easy to sync and easy to use to focus and take pictures or selfies. 4.Avoid shake that ruins the picture. 1.Turn on your camera - press setting - choosing Remote control - Enable. 2.Choosing wireless communication setting - function - Remote - Pairing. 3.Press the remote control W and T at the same time 4.In your camera you will see Paired with ,you need to press ok.It is finish to pair. Taking photo: For remote control: press the remote control to shutter release photo position. For camera:setting the camera to Non-recording mode - drive mode to remote control. Start/Stop video recording: For remote control:press the remote control to recording position. For camera:setting video mode - The drive mode is adjusted to the REMOTE CONTROL - The remote control should be enabled (the camera only sees this option when the remote control to the recording position) 1.For your camera setting: go to setting under the wrench settings - choose wireless communication - choose function - choose remote. 2.Once pairing is highlighted on the camera, for your remote control setting: you simply hold down the W and the T button on the remote for a few seconds and it should connect. 3.Once the remote is paired with the camera, on the M50 you need to choose a camera setting - enter the MENU - in the CAMERA menu on the first tab - scroll down to "Drive Mode" - it to to "self-timer:10sec/remote" - stress the "remote" part of that. 4.On the remote when the switch on the side is all the way up, that is for taking still images. When the switch is all the way down, that is for starting and stopping video recording. PLS NOTICE: Make sure your camera drive mode to remote mode. We have been focusing on the camera accessories industry more than 15 years, integrating production, research and development and sales. Camera wireless/wired shutter remote, release cable, flash trigger, battery pack, Camcorder Zoom Controller it is our main product. Our aim is to supply fast, superior and valuable product and shopping experience to customers. Check all your settings. Make sure that the remote is switch to photo or video. Check whether if had select on the remote from video to photos mode or set the drive mode to Self-timer: 10sec/Remote. Check select on the remote set to "photo" mode, setting to your camera to "Drive Mode" - it to to "self-timer:10sec/remote" - stress the "remote" part of that. Don't need, the connection between camera and receiver is the shutter release cable, not the hot shoe. number of shots: 1-199 photos programmable and - - being unlimited photos. Exposure time: 0s to 99hrs 59min 59s in one second increments.To get a single exposure, set the "N" value to 1. Start the exposure by pressing the "play" button.