Search  for anything...
Thermaltake

Thermaltake View 51 Snow Motherboard Sync ARGB E-ATX Full Tower Gaming Computer Case with 2 200mm ARGB 5V Motherboard Sync RGB Fans + 140mm Black Rear Fan Pre-Installed CA-1Q6-00M6WN-00, White

  • Based on 2,270 reviews
Condition: New
Checking for product changes
$198.99 Why this price?
Save $41.00 was $239.99

Buy Now, Pay Later

As low as $33.17 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout.

Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: 15 left in stock
Fulfilled by Amazon
Arrives Tuesday, Jun 3
Order within 7 hours and 29 minutes
Available payment plans shown during checkout

Recently Viewed

Color: White


Size: View 51


Style: ARGB


Pattern Name: Computer Case


Features

  • [LIGHT UP THE SYSTEM] - 2 Pre-installed 200mm 5V Motherboard Sync ARGB fans plus ARGB light bar at front panel (Sync with Asus Gigabyte MSI ASRock Biostar that has 5V addressable RGB header)
  • [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] - Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software
  • [27 LED MODES via I/O PORT] - Wave mode/ Flow mode/ RGB lighting (single color)/ Radar mode (Red yellow green Cyan blue White Purple)/ Breath mode (8 Colors)/ Full Lighted mode/ Single Color mode (7 Colors)/ Light Off
  • [PATENTED ROTATIONAL PCI-E 8 SLOTS DESIGN] - With patented rotational PCI-E slots you can choose the way you want to display graphic cards vertically or horizontally
  • [SMART SPACE] Sophisticated space design at the right side of the case provides a neat area for PSU placement and cable management
  • [2 plus 2 DRIVE BAY] - 2 5"/3 5" x 2 with HDD Cage plus 2 5" x 2 with HDD Bracket
  • Supports Mini ITX Micro ATX ATX E-ATX (up to 10 5") Motherboard
  • I/O Port - Type C x 1 USB 3 0 x 2 USB 2 0 x 2 HD Audio x 1 RGB Switch x 1
  • OUTSTANDING EXPANSION - Max CPU Cooler Height 175mm / Max VGA Length 300mm (With Reservoir) 440mm (Without Reservoir) / Max PSU Length 200mm
  • DIMENSION - 21 65" x 12 4" x 20 67" 32 96 lbs 3 Year

Description

View 51 Tempered Glass Snow ARGB Full-Tower case features two white 200mm 5V ARGB fans at the front and one white 120mm 5V ARGB fan at the rear providing outstanding ventilation which are compatible with motherboard synchronization software The I/O ports are positioned vertically on the right side of the front panel with tempered glass windows on its left It can hold up to two 200mm fans at the front and on the top With support for the latest PC hardware View 51 TG Snow ARGB is not only fascinating in appearance but comes with endless possibilities for PC lovers P/N: CA-1Q6-00M6WN-00 SERIES: View MODEL: View 51 TG Snow CASE TYPE: Middle Tower DIMENSION (H X W X D): 550 x 315 x 525 mm (21.65 x 12.4 x 20.67 inch) SIDE PANEL: 3 x Tempered Glass (4mm thickness) COLOR: Exterior & Interior: White MATERIAL: SPCC COOLING SYSTEM Front (intake): 2 x 200 x 200 x 30mm Addressable RGB fan (Fixed 600rpm, 24dBA) Rear (exhaust): 1 x 120 x 120 x 25mm Addressable RGB fan (Fixed 1000rpm, 27.2 dBA) DRIVE BAYS: ACCESSIBLE 2 x 3.5’’ or 2.5’’ (With HDD Cage) ; 2 x 2.5’’ (With HDD Bracket) EXPANSION SLOTS: 8 MOTHERBOARDS: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX), E-ATX (up to 10.5'' wide) I/O PORT: 1 x Type-C, 2 x USB 2.0, 2 x USB 3.0, 1 x HD Audio PSU: Standard PS2 PSU (optional) FAN SUPPORT Front: 3 x 120mm, 3 x 140mm, 2 x 200mm Top: 3 x 120mm, 3 x 140mm, 2 x 200mm Rear: 1 x 120mm Right: 3 x 120mm, 2 x 140mm Bottom: 3 x 120mm RADIATOR SUPPORT Front: 1 x 360mm, 1 x 280mm Top: 1 x 360mm, 1 x 280mm Right: 1 x 360mm, 1 x 280mm Bottom: 1 x 360mm CLEARANCE CPU cooler height limitation: 175mm VGA length limitation: 300mm (With Water Pump), 440mm (Without Water Pump) PSU length limitation: 200mm.

Brand: Thermaltake


Motherboard Compatability: ATX


Case Type: Full Tower


Color: White


Material: Tempered Glass


Cooling Method: Water, Air


Item Weight: 2.2 Pounds


Product Dimensions: 20.67"D x 12.4"W x 21.65"H


Number of Expansion Slots: 8


Number of USB 2 Ports: 2


Number of USB 2.0 Ports: ‎2


Number of USB 3.0 Ports: ‎2


Brand: ‎Thermaltake


Item model number: ‎CA-1Q6-00M6WN-00


Item Weight: ‎2.2 pounds


Product Dimensions: ‎21.65 x 12.4 x 20.67 inches


Item Dimensions LxWxH: ‎21.65 x 12.4 x 20.67 inches


Color: ‎White


Manufacturer: ‎Thermaltake


Country of Origin: ‎China


Date First Available: ‎January 23, 2020


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Tuesday, Jun 3

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Good design, good quality, but the small details...
Color: White Size: View 51 Style: ARGB Pattern Name: Computer Case
Case looks cool, easy to work with, fans looks cool. There are many details they did good. However there are lots of small details that i don’t know what to say. 1. The case has dust filters, but as the builds in the pictures, they all use the dust filtered ports as exhausts. The intakes have no dust filter, and the intakes are small! The poor weak 200 fans have to work their ***es off to suck the air in. Doesn’t make any sense to me. 2. The case is huge, but it use very little space for hard drives, I had a hard time mounting them.(I have 3 fans on the bottom as intakes, because there is a dust filter.) 3. The screw holes are weird, that most of them are hard to screw in. I often felt like I used the wrong screws, because I had to use some force so they could go in, other screws will not even fit. 4. Although most people don’t pay attention to the rear, but it is ugly! 5. Again the case is huge, even bigger than some e-atx cases, but wait, this case does not support e-atx!? It has 8 pcie mounting positions, but There’s no mounting holes for e-atx. Even if you put an e-atx mb in, you can no longer use the vertical gpu mount, as it is in the way. 6. This case is for water cooling, thus I assume it also should take care of noises. However, the hard drive mount only used hard plastic, which makes my 3.5 hard drive sound much louder. My last case is a Phanteks p400. For a price of $80, it has rubber on hard disk mounts, which made the hard drive much quieter. 7. I mounted 3 120 fans on the bottom because it has a dust filter, but the vents are so small that the poor little coolermaster sickle flow 120mm fans don’t produce much airflow. I just purchased 3 high pressure fans to replace the current ones, hoping to give the pc more air. 8. I mounted 3 140mm fans on the top for exhaust, but there are more room for the air to go back down than to go out, due to the narrow vents. If you mount the provided 2 200mm fans on the top, they are literally touching the glasses, making the big ARGB fans only for good look, because they are literally trying to blow through a wall. 9. The case has a cap on the bottom for draining water(if you build a custom water loop), but to use the vent you have to move your pc so out that they would fall to the ground. Why is there such a useful feature but you can never use? 10. You can have access to the hard drives from the back of the case without opening the panels. Supposedly you can easily swap your hard drives, since the mount slide outwards, but no, you have to open the right panel so you can unplug the SATA power and SATA cable. Again, Why does this case have such design but you can’t really use it? 11. The power button has led around it, but it can only be white. 12. The fans came with the case are at full speed the all the time, unless you unplug them. If you unplugged one of the fans, you may disrupt the ARGB signals to the other fans, as the fans have a pin for ARGB-in and another pin for ARGB-out. Maybe they want the leds on the fans to be in series. This case is far from perfect, but given a price tag of $200, it is indeed a good product. ... show more
Reviewed in the United States on November 28, 2020 by Neo
    • Just what I wanted. Clean looking, smooth and quiet. Words of caution if air cooling a Z390 CPU.
Color: Black Size: View 71 Style: RGB Pattern Name: Computer Case
Review Image by Doitallbetter Doitallbetter
Review Image by Doitallbetter Doitallbetter
Review Image by Doitallbetter Doitallbetter
Review Image by Doitallbetter Doitallbetter
Review Image by Doitallbetter Doitallbetter
Review Image by Doitallbetter Doitallbetter
Review Image by Doitallbetter Doitallbetter
Review for View 71 RGB. Quality is great. Only exception is the glass top and the glass main view door do not fit the pins exactly. Since they are injection molded, they cannot be loosened and re-centered to allow for better fitment. I am able to get them "pressed" into place, but would rather they just work. The rest of the case is wonderful. I was able to get three 140mm fans to mount into the front. The top of the three fans does not line up exact with the window they have made in the front but who cares. (See Pics) Several other notes from my build: I am using a EVGA gold 750 and was JUST BARELY able to get the two of the matching RGB riing120mm fans I purchased separately to fit in the lower location. So some of the larger/deeper power supplies would only have allowed one 120mm. Another note for using this case with CPU air cooling and a Z390 Motherboard with the GPU mounted Vertically: I am using a very common "entry level" CPU cooler, the Cool Master Hyper 212 CPU cooler along with a Z390 motherboard. Since this motherboard family has the CPU socket located closer to the center of the board the CPU cooler could not be mounted vertically with the fan blowing toward the rear of the case as is typical, there is just not enough room. So, IF you are going to mount your video card in the vertical extended slot provided take extra care to speck your CPU air cooler. As you can see from my pic even with the CPU cooler blowing up there is only a 1/4" gap at most there. In my case I had to Slip the fan on from the top of the cooler which was a hassle. If I run into issues with keeping my CPU cool and need to upgrade I will not be buying an air solution (which I prefer to liquid) but will be forced to buy a liquid loop to ensure clearance issues are not a problem. See attached pics for help deciding. I originally didn't think I would use an optical drive in my build but after fitting it between the two drive bays provided I was happily satisfied with leaving it attached after installing all software from discs. I had no problems with the Thermaltake fans or controllers. Looking GOOD. Also note that this View 71 is heavy. I will weigh my total build and post it here later. Love the case. Love the layout. Easy cable runs and room to grow. ... show more
Reviewed in the United States on December 8, 2018 by Doitallbetter Doitallbetter
    • Plenty of build room, sturdy, heavy PC Case
Color: Black Size: View 71 Style: non-RGB Pattern Name: Computer Case
TLDR; Great case with plenty of room. It is heavy, but sturdy, with a clean aesthetic. Case came as advertised and was very easy to build in. The HDD cages were easily removed and there was plenty of room for a standard ATX motherboard with an AIO 280mm CPU radiator top mounted. Cable management in the back is a learning curve for those unfamiliar with full glass cases, but it was not a problem. The only issue I had was horizontally mounting a GPU. The mounting bracket at the back of the case was not exactly in line, so it took some additional pressure to get the thumbscrews in place to hold the card. I ended up vertically mounting my GPU using the bracket (cable not included) so it was not a problem. Pros: Spacious Hinged doors make access easy Very customizable for fans and water cooling Good temps Cons: Not insulated for noise (didn't expect it to be, but others might) Cable management is on display in the back PCIE bracket thumbscrew holes were slightly off Some screws are low quality and may strip/break (had 1 snap while installing vertical GPU mount) Does not include PCIE riser cable to accompany mount HEAVY (full build weighs 80+ lbs) I would recommend this case if you like the aesthetic and are looking for an easy access case that can easily run a water loop. In this price range their may be better cases for sound and air flow, but this is an as advertised case. ... show more
Reviewed in the United States on November 9, 2020 by crankypants

Can't find a product?

Find it on Amazon first, then paste the link below.