Roly LaserMATIC Mk2 20W Laser Engraver with Camera Enclosure, Includes Chuck Rotary, Air Assist and Honeycomb Panel, Laser Engraver for Wood, Metal, Fabric and Paper, 410x390mm
Condition: New
Notify me when this product is back in stock
Buy Now, Pay Later
As low as
/ mo
Learn more
- – Up to 36-month term if approved
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Free shipping on this product
30-day returns
Learn more
30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Unavailable
Features
- Roly Model Number: M12. Output power: 20000mW (20W). FDA Class 1 laser product, tested in accordance to 21 CFR 1040.10
- [Everything you need] Includes chuck-style rotary, air assist pump, honeycomb table and enclosure camera - all the tools you need to tackle a wide variety of jobs, everything built from the ground up to work together!
- [Competitive performance] Engrave at up to 500mm/s or 30,000mm/min. Cuts 6mm basswood plywood in one pass at up to 330mm/min. In 10W engraving mode, laser focuses down to 0.20*0.08mm for very fine details
- [The friendly laser engraver] Engraver is fully enclosed in optical acrylic. Enclosure filters laser, exhausts fumes and reduces operating volumes. Ideal for getting things done at home. 6ft collapsible 4'' aluminum duct included.
- [Unrivalled versatility] Switch between flat pieces and tumblers within seconds, without the need to mess with extensions or raising the entire machine. Passthrough slot allows for work on long pieces.
- [LightBurn-compatible camera] Built-in camera works with LightBurn. Take the guesswork out of job placement and make the most of your material with help from the camera (requires calibration in LightBurn).
- [Great Customer Support] We pride ourselves on standing behind every machine we sell. Your inquiries will be handled by our technically-savvy support team who have the freedom to make decisions!
- [Extensive Materials Library] Comes with an extensive LightBurn material settings library to help you hit the road running.
- [Optional Accessories Available] Including 1) jig table; 2) side-exhaust mod; and 3) bottom drop-down extension mod, which allows for engraving of large 40oz tumblers with handles inside the enclosure.
Brand: Roly
Material: Acrylic, Metal, Wood
Color: Silver and Orange
Style: Laser
Item Weight: 52.5 Pounds
Brand: Roly
Material: Acrylic, Metal, Wood
Color: Silver and Orange
Style: Laser
Item Weight: 52.5 Pounds
Operation Mode: Automatic
Manufacturer: Roly
Part Number: M101-LM10
Item Weight: 52.5 pounds
Product Dimensions: 31 x 30 x 17 inches
Item model number: M101
Item Package Quantity: 1
Batteries Required?: No
Warranty Description: 1 year manufacturer
Date First Available: November 25, 2022
Frequently asked questions
This product is currently out of stock. Please check back later for shipping info.
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
it's early days (only 2 weeks) use so far, I've used it to cut and engrave wood and found it performs well. As this is my first laser system and still on a learning curve, I feel I made the right decision to purchase this model. The unit arrived in a few days and extremely well packed, it entailed a little assembly with basic tools, working from the well documented manual no problems were encountered. All assembly hinged around the gantry and the enclosure and a few connections. Having spent 43 years in medical instrumentation business I found the quality and finish to be impressive. Main point, I had emailed a question for Roly which was answered the next day, now this is true after sales service. It's now been over two weeks since getting this unit and even more impressed with it's ease of use and performance. I've tried engraving and cutting wood, engraving slate and stainless steel case in point not many in this price range allows use on SS but this unit you are able to change the frequency (as explained in the manual). I particularly like the screw Z adjustment with a positive lock and the ability to use the supplied rotary which is located on pegs mounted on the bottom plate. I guess I should also mention the built-in camera when used in conjunction with Lightburn makes it so straightforward to align artwork to the work piece without any trial and error. For the skeptic, I did pay full price for it, this was NOT a freebee. UPDATE 6/4/2023 It's now several weeks I've been using this unit and I'm even more impressed and confident I made the right decision, so far the only problem I've had is poor extraction of smoke and fumes this was resolved by Roly on supplying a more powerful fan which I understand will be standard on all units going forward. As stated, I'm a beginner in the laser etching world and my experience and comfort is growing daily. Lightburn used in conjunction with this laser unit is a perfect combination and I've found so much helpful information on-line to shorten the learning curve. August 21, 2023 I now have several months using this product and continue to be amazed not only with the quality of build but more recently the performance, I had cut 100mm/4" wide butterflies from 3mm ply and now tried seeing how small I could get without loss of detail see attached picture shown with scale, the small through holes are 0.47mm or 0.019".
...
show more
Reviewed in the United States on April 13, 2023 by BritBrat BritBrat
Please read Richard C. Drew's review. I agree with everything he describes about the thought and craftsmanship that went into each component while building this amazing laser. Having a diode laser already, let's you appreciate the huge difference - from assembly, to having it actually up and running, between this quality machine and the other 10W machines. Trying to reach the same level of offerings with another laser, you would have to go the Frankenstein approach and piecemeal via 3rd party vendors, 3d printing or Etsy vendors to get there. Even then the LaserMATIC10 would stand above due to the quality of the components and the fact they were factory tested to work together as one unit. Wait until the enclosed model is back in stock and compare features and final cost before you purchase a 10w diode laser. This is a top quality laser that is an amazing value. Search on YouTube for Roly LaserMATIC10. Check out the YouTube videos from the Louisiana Hobby Guy and Valley Forged. They can better show and explain the many wonderful features better than I can write them. Setup was super easy since frame was already assembled..nice and square, and the videos from Leo the owner and Rich the LA Hobby Guy were a great help. The quality and the detail of thought that went into creating each aspect of the operation of this laser is amazing. Glad I was one of the lucky few who was able to get the enclosure model from the first batch. It is truly a piece of working art.
...
show more
Reviewed in the United States on February 11, 2023 by Dave Crady
I bought this cutter / engraver after watching a YouTube video by the Louisiana Hobby Guy where he waxed poetic on how well made it is. He was not lying. It’s a very well made and attractive machine. I’m a complete noob to laser engravers and I have never used GRBL or Lightburn (the software most people use with their lasers). However I am a design professional and am very familiar with Autocad, fusion 360, etc so learning the software took about a day. It’s not that difficult to use, but like all software it has its quirks. Assembling and starting up the laser cutter took less than an hour thanks to the unit being mostly assembled and the provided very good instructions The laser ships with a material library and a light burn setup file that really make putting it into service remarkably painless and easy. I was a little concerned it would have trouble cutting through the 6-8 oz leather I was using, but absolutely no problem. Overall I’d say very easy to set up and use while also being a top quality machine. Very definitely worth the price. Edit: I recently purchased the 20W laser upgrade to this unit and it was a painless, easy effort to swap out the old 10 W laser. The new laser head is a lot bigger than the old laser head, so you lose about 10 mm of working area on the Y axis, but other than that, the additional power is very useful. I had no problems cutting through a 3/8" thick piece of pine, which will make the laser useful for a lot more activities.
...
show more
Reviewed in the United States on June 21, 2023 by Quiet Gardener